如何改scsi-initiator-id的问题，请大侠解释

shyzqing

如何改scsi-initiator-id的问题，我问了sun的工程师
目前主要的观点有两种
1。
a. ok show-disks 记下控制器的路径
b. 创建一个nvramrc脚本设置scsi-initiator-id
ok nvedit
0: probe-all install-console banner
1: cd /pci@6,4000/scsi@3
2: 6 " scsi-initiator-id" integer-property
3: device-end
4: cd /pci@6,4000/scsi@2,1
5: 6 " scsi-initiator-id" integer-property
6: device-end
7: banner (Control C)
ok nvstore
ok setenv use-nvramrc? True
ok setenv auto-boot? true
ok reset-all
ok boot



2。
a. ok proble－scsi－all  记下记下SCSI光驱的和磁带机的地址，
b。ok setenv scsi-initiator-id 6
3. 创建一个nvramrc脚本设置scsi-initiator-id
ok nvedit
0: probe-all install-console banner
1: cd /pci@6,4000/scsi@3
2: 7 " scsi-initiator-id" integer-property
3: device-end
4: cd /pci@6,4000/scsi@2,1
5: 7 " scsi-initiator-id" integer-property
6: device-end
7: banner (Control C)
ok nvstore
ok setenv use-nvramrc? True
ok setenv auto-boot? true
ok reset-all
ok boot