免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
12下一页
最近访问板块 发新帖
查看: 4216 | 回复: 11
打印 上一主题 下一主题

HP DL380G4双cpu安装BSD后只认到一个cpu,内核加入smp启动不起来 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2005-07-30 12:31 |只看该作者 |倒序浏览
这是dmesg:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May  8 10:21:06 UTC 2005
    root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <HP     00000083>;
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.12-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>;
  Hyperthreading: 2 logical CPUs
real memory  = 2147430400 (2047 MB)
avail memory = 2095955968 (1998 MB)
ioapic0 <Version 2.0>; irqs 0-23 on motherboard
ioapic1 <Version 2.0>; irqs 24-47 on motherboard
ioapic2 <Version 2.0>; irqs 48-71 on motherboard
ioapic3 <Version 2.0>; irqs 72-95 on motherboard
ioapic4 <Version 2.0>; irqs 96-119 on motherboard
npx0: <math processor>; on motherboard
npx0: INT 16 interface
acpi0: <HP P51>; on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz>; port 0x908-0x90b on acpi0
cpu0: <ACPI CPU>; on acpi0
pcib0: <ACPI Host-PCI bridge>; on acpi0
pci0: <ACPI PCI bus>; on pcib0
pcib1: <ACPI PCI-PCI bridge>; at device 2.0 on pci0
pci2: <ACPI PCI bus>; on pcib1
pcib2: <ACPI PCI-PCI bridge>; at device 0.0 on pci2
pci3: <ACPI PCI bus>; on pcib2
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100>; mem 0xfdef0000
-0xfdefffff irq 25 at device 1.0 on pci3
miibus0: <MII bus>; on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY>; on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
-FDX, auto
bge0: Ethernet address: 00:12:79:cd:4d:31
bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100>; mem 0xfdee0000
-0xfdeeffff irq 26 at device 1.1 on pci3
miibus1: <MII bus>; on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY>; on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
-FDX, auto
bge1: Ethernet address: 00:12:79:cd:4d:30
pcib3: <ACPI PCI-PCI bridge>; at device 0.2 on pci2
pci4: <ACPI PCI bus>; on pcib3
ciss0: <HP Smart Array 6i>; port 0x4000-0x40ff mem 0xfdf80000-0xfdfbffff,0xfdff00
00-0xfdff1fff irq 51 at device 3.0 on pci4
pcib4: <ACPI PCI-PCI bridge>; at device 6.0 on pci0
pci5: <ACPI PCI bus>; on pcib4
pcib5: <ACPI PCI-PCI bridge>; at device 0.0 on pci5
pci6: <ACPI PCI bus>; on pcib5
pcib6: <ACPI PCI-PCI bridge>; at device 0.2 on pci5
pci10: <ACPI PCI bus>; on pcib6
uhci0: <Intel 82801EB (ICH5) USB controller USB-A>; port 0x2000-0x201f irq 16 at
device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A>; on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B>; port 0x2020-0x203f irq 19 at
device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B>; on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C>; port 0x2040-0x205f irq 18 at
device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C>; on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D>; port 0x2060-0x207f irq 16 at
device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D>; on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB>; at device 29.7 (no driver attached)
pcib7: <ACPI PCI-PCI bridge>; at device 30.0 on pci0
pci1: <ACPI PCI bus>; on pcib7
pci1: <display, VGA>; at device 3.0 (no driver attached)
pci1: <base peripheral>; at device 4.0 (no driver attached)
pci1: <base peripheral>; at device 4.2 (no driver attached)
isab0: <CI-ISA bridge>; at device 31.0 on pci0
isa0: <ISA bus>; on isab0
atapci0: <Intel ICH5 UDMA100 controller>; port 0x500-0x50f,0x376,0x170-0x177,0x3f
6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
acpi_tz0: <Thermal Zone>; on acpi0
atkbdc0: <Keyboard controller (i8042)>; port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard>; irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <S/2 Mouse>; irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
sio0: <Standard PC COM port>; port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
fdc0: <floppy drive controller (FDE)>; port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
orm0: <ISA Option ROMs>; at iomem 0xee000-0xeffff,0xcc000-0xcd7ff,0xc8000-0xcbfff
,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console>; at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>;
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA>; at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 3000122167 Hz quality 800
Timecounters tick every 10.000 msec
acd0: CDROM <COMPAQ CD-ROM SN-124/N104>; at ata0-master PIO4
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 5  VOLUME OK>; Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: 138919MB (284506560 512 byte sectors: 255H 32S/T 34866C)
Mounting root from ufs:/dev/da0s1a
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to d
eny, logging disabled
arp: 192.168.5.1 is on bge0 but got reply from 00:90:27:79:28:15 on bge1
arp: 192.168.5.1 is on bge0 but got reply from 00:90:27:79:28:15 on bge1
arp: 192.168.5.1 is on bge0 but got reply from 00:90:27:79:28:15 on bge1
arp: 192.168.5.20 is on lo0 but got reply from 00:12:79:cd:4d:31 on bge1
arp: 192.168.5.20 is on lo0 but got reply from 00:12:79:cd:4d:31 on bge1
arp: 192.168.5.1 is on bge0 but got reply from 00:90:27:79:28:15 on bge1
arp: 192.168.5.1 is on bge0 but got reply from 00:90:27:79:28:15 on bge1
arp: 192.168.5.1 is on bge0 but got reply from 00:90:27:79:28:15 on bge1
arp: 192.168.5.1 is on bge0 but got reply from 00:90:27:79:28:15 on bge1
arp: 192.168.5.1 is on bge0 but got reply from 00:90:27:79:28:15 on bge1
arp: 192.168.5.1 is on bge0 but got reply from 00:90:27:79:28:15 on bge1
arp: 192.168.5.1 is on bge0 but got reply from 00:90:27:79:28:15 on bge1
arp: 192.168.5.1 is on bge0 but got reply from 00:90:27:79:28:15 on bge1

论坛徽章:
0
2 [报告]
发表于 2005-07-30 12:32 |只看该作者

HP DL380G4双cpu安装BSD后只认到一个cpu,内核加入smp启动不起来

这是偶的内核文件,编译安装后启动不了,呜呜:
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.413.2.13 2005/04/02 16:37:58 scottl Exp $

machine         i386
#cpu            I486_CPU
#cpu            I586_CPU
cpu             I686_CPU
ident           KERNEL_WWW_SERVER

# To statically compile in device wiring instead of /boot/device.hints
#hints          "GENERIC.hints"         # Default places to look for devices.

options         SCHED_ULE               # 4BSD scheduler
options         INET                    # InterNETworking
#options        INET6                   # IPv6 communications protocols
options         FFS                     # Berkeley Fast Filesystem
options         SOFTUPDATES             # Enable FFS soft updates support
options         UFS_ACL                 # Support for access control lists
options         UFS_DIRHASH             # Improve performance on big directories
#options        MD_ROOT                 # MD is a potential root device
#options        NFSCLIENT               # Network Filesystem Client
#options        NFSSERVER               # Network Filesystem Server
#options        NFS_ROOT                # NFS usable as /, requires NFSCLIENT
#options        MSDOSFS                 # MSDOS Filesystem
#options        CD9660                  # ISO 9660 Filesystem
#options        PROCFS                  # Process filesystem (requires PSEUDOFS)
#options        PSEUDOFS                # Pseudo-filesystem framework
options         GEOM_GPT                # GUID Partition Tables.
options         COMPAT_43               # Compatible with BSD 4.3 [KEEP THIS!]
options         COMPAT_FREEBSD4         # Compatible with FreeBSD4
options         SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options         KTRACE                  # ktrace(1) support
options         SYSVSHM                 # SYSV-style shared memory
options         SYSVMSG                 # SYSV-style message queues
options         SYSVSEM                 # SYSV-style semaphores
options         _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         AHC_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~128k to driver.
options         AHD_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~215k to driver.
options         ADAPTIVE_GIANT          # Giant mutex is adaptive.

options         SMP                     # Lewis add

device          apic                    # I/O APIC

# Bus support.  Do not remove isa, even if you have no isa slots
#device         isa
#device         eisa
device          pci

# Floppy drives
#device         fdc

# ATA and ATAPI devices
device          ata
device          atadisk         # ATA disk drives
device          ataraid         # ATA RAID drives
device          atapicd         # ATAPI CDROM drives
device          atapifd         # ATAPI floppy drives
device          atapist         # ATAPI tape drives
options         ATA_STATIC_ID   # Static device numbering

# SCSI Controllers
device          ahb             # EISA AHA1742 family
device          ahc             # AHA2940 and onboard AIC7xxx devices
device          ahd             # AHA39320/29320 and onboard AIC79xx devices
device          amd             # AMD 53C974 (Tekram DC-390(T))
device          isp             # Qlogic family
device          mpt             # LSI-Logic MPT-Fusion
#device         ncr             # NCR/Symbios Logic
device          sym             # NCR/Symbios Logic (newer chipsets + those of `ncr')
device          trm             # Tekram DC395U/UW/F DC315U adapters

device          adv             # Advansys SCSI adapters
device          adw             # Advansys wide SCSI adapters
device          aha             # Adaptec 154x SCSI adapters
device          aic             # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
device          bt              # Buslogic/Mylex MultiMaster SCSI adapters

device          ncv             # NCR 53C500
device          nsp             # Workbit Ninja SCSI-3
device          stg             # TMC 18C30/18C50

# SCSI peripherals
device          scbus           # SCSI bus (required for SCSI)
device          ch              # SCSI media changers
device          da              # Direct Access (disks)
device          sa              # Sequential Access (tape etc)
device          cd              # CD
device          pass            # Passthrough device (direct SCSI access)
device          ses             # SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
device          amr             # AMI MegaRAID
device          arcmsr          # Areca SATA II RAID
device          asr             # DPT SmartRAID V, VI and Adaptec SCSI RAID
device          ciss            # Compaq Smart RAID 5*
device          dpt             # DPT Smartcache III, IV - See NOTES for options
device          hptmv           # Highpoint RocketRAID 182x
device          iir             # Intel Integrated RAID
device          ips             # IBM (Adaptec) ServeRAID
device          mly             # Mylex AcceleRAID/eXtremeRAID
device          twa             # 3ware 9000 series PATA/SATA RAID

# RAID controllers
device          aac             # Adaptec FSA RAID
device          aacp            # SCSI passthrough for aac (requires CAM)
device          ida             # Compaq Smart RAID
device          mlx             # Mylex DAC960 family
device          pst             # Promise Supertrak SX6000
device          twe             # 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc          # AT keyboard controller
device          atkbd           # AT keyboard
device          psm             # PS/2 mouse

device          vga             # VGA video card driver

#device         splash          # Splash screen and screen saver support

options SC_DISABLE_REBOOT       # Lewis add ,no ctrl+alt+del

# syscons is the default console driver, resembling an SCO console
device          sc

# Enable this for the pcvt (VT220 compatible) console driver
#device         vt
#options        XSERVER         # support for X server on a vt console
#options        FAT_CURSOR      # start with block cursor

device          agp             # support several AGP chipsets

# Floating point support - do not disable.
device          npx

# Power management support (see NOTES for more options)
#device         apm
# Add suspend/resume support for the i8254.
device          pmtimer

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device         cbb             # cardbus (yenta) bridge
#device         pccard          # PC Card (16-bit) bus
#device         cardbus         # CardBus (32-bit) bus

# Serial (COM) ports
#device         sio             # 8250, 16[45]50 based serial ports

# Parallel port
#device         ppc
#device         ppbus           # Parallel port bus (required)
#device         lpt             # Printer
#device         plip            # TCP/IP over parallel
#device         ppi             # Parallel port interface device
#device         vpo             # Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device         puc

# PCI Ethernet NICs.
#device         de              # DEC/Intel DC21x4x (``Tulip'')
#device         em              # Intel PRO/1000 adapter Gigabit Ethernet Card
#device         ixgb            # Intel PRO/10GbE Ethernet Card
#device         txp             # 3Com 3cR990 (``Typhoon'')
#device         vx              # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support
#device         bfe             # Broadcom BCM440x 10/100 Ethernet
device          bge             # Broadcom BCM570xx Gigabit Ethernet
#device         dc              # DEC/Intel 21143 and various workalikes
#device         fxp             # Intel EtherExpress PRO/100B (82557, 8255
#device         lge             # Level 1 LXT1001 gigabit ethernet
#device         nge             # NatSemi DP83820 gigabit ethernet
#device         pcn             # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
#device         re              # RealTek 8139C+/8169/8169S/8110S
#device         rl              # RealTek 8129/8139
#device         sf              # Adaptec AIC-6915 (``Starfire'')
#device         sis             # Silicon Integrated Systems SiS 900/SiS 7016
#device         sk              # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device         ste             # Sundance ST201 (D-Link DFE-550TX)
#device         ti              # Alteon Networks Tigon I/II gigabit Ethernet
#device         tl              # Texas Instruments ThunderLAN
#device         tx              # SMC EtherPower II (83c170 ``EPIC'')
#device         vge             # VIA VT612x gigabit ethernet
#device         vr              # VIA Rhine, Rhine II
#device         wb              # Winbond W89C840F
#device         xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.  pccard NICs included.
device          cs              # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device         ed              # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device         ex              # Intel EtherExpress Pro/10 and Pro/10+
#device         ep              # Etherlink III based cards
#device         fe              # Fujitsu MB8696x based cards
#device         ie              # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device         lnc             # NE2100, NE32-VL Lance Ethernet cards
#device         sn              # SMC's 9000 series of Ethernet chips
#device         xe              # Xircom pccard Ethernet

# ISA devices that use the old ISA shims
#device         le

# Wireless NIC cards
#device         wlan            # 802.11 support
#device         an              # Aironet 4500/4800 802.11 wireless NICs.
#device         awi             # BayStack 660 and others
#device         wi              # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device         wl              # Older non 802.11 Wavelan wireless NIC.

# Pseudo devices.
device          loop            # Network loopback
device          mem             # Memory and kernel memory devices
device          io              # I/O device
device          random          # Entropy device
device          ether           # Ethernet support
#device         sl              # Kernel SLIP
#device         ppp             # Kernel PPP
#device         tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
#device         md              # Memory "disks"
#device         gif             # IPv6 and IPv4 tunneling
#device         faith           # IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device          bpf             # Berkeley packet filter

# USB support
device          uhci            # UHCI PCI->;USB interface
device          ohci            # OHCI PCI->;USB interface
#device         ehci            # EHCI PCI->;USB interface (USB 2.0)
device          usb             # USB Bus (required)
#device         udbp            # USB Double Bulk Pipe devices
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
device          ukbd            # Keyboard
device          ulpt            # Printer
device          umass           # Disks/Mass storage - Requires scbus and da
device          ums             # Mouse
device          urio            # Diamond Rio 500 MP3 player
device          uscanner        # Scanners
# USB Ethernet, requires mii
#device         aue             # ADMtek USB Ethernet
#device         axe             # ASIX Electronics USB Ethernet
#device         cdce            # Generic USB over Ethernet
#device         cue             # CATC USB Ethernet
#device         kue             # Kawasaki LSI USB Ethernet
#device         rue             # RealTek RTL8150 USB Ethernet

# FireWire support
device          firewire        # FireWire bus code
device          sbp             # SCSI over FireWire (Requires scbus and da)
device          fwe             # Ethernet over FireWire (non-standard!)

论坛徽章:
2
丑牛
日期:2013-09-29 09:47:222015七夕节徽章
日期:2015-08-21 11:06:17
3 [报告]
发表于 2005-07-30 15:06 |只看该作者

HP DL380G4双cpu安装BSD后只认到一个cpu,内核加入smp启动不起来

关闭超线程先

论坛徽章:
0
4 [报告]
发表于 2005-07-30 15:47 |只看该作者

HP DL380G4双cpu安装BSD后只认到一个cpu,内核加入smp启动不起来

[quote]原帖由 "剑心通明"]关闭超线程先[/quote 发表:

问题是用通用内核的时候,认到单个cpu的时候,开超线程都正常的啊???

偶用了这两句:
options SCHED_ULE # 4BSD scheduler
options SMP

论坛徽章:
1
寅虎
日期:2013-09-29 23:15:15
5 [报告]
发表于 2005-07-30 15:53 |只看该作者

HP DL380G4双cpu安装BSD后只认到一个cpu,内核加入smp启动不起来

cvsup升级源码,make world到5.4-Release-p6再看看.

论坛徽章:
2
丑牛
日期:2013-09-29 09:47:222015七夕节徽章
日期:2015-08-21 11:06:17
6 [报告]
发表于 2005-07-30 16:28 |只看该作者

HP DL380G4双cpu安装BSD后只认到一个cpu,内核加入smp启动不起来

原帖由 "skysnowolf" 发表:

问题是用通用内核的时候,认到单个cpu的时候,开超线程都正常的啊???

偶用了这两句:
options SCHED_ULE # 4BSD scheduler
options SMP

开了超线程就可能出问题的

论坛徽章:
0
7 [报告]
发表于 2005-07-30 17:12 |只看该作者

HP DL380G4双cpu安装BSD后只认到一个cpu,内核加入smp启动不起来

关了超线程,还是不行。奇怪的是关了超线程后,用GENERIC内核启动时,发现dmesg中cpu信息还是有超线程信息,没有变。

论坛徽章:
1
寅虎
日期:2013-09-29 23:15:15
8 [报告]
发表于 2005-07-30 17:54 |只看该作者

HP DL380G4双cpu安装BSD后只认到一个cpu,内核加入smp启动不起来

5.4-Release默认是把HTT打开的,5.4-Release-p1后就默认关闭,make world到p6后,再打开SMP选项试试.

论坛徽章:
0
9 [报告]
发表于 2005-07-30 19:53 |只看该作者

HP DL380G4双cpu安装BSD后只认到一个cpu,内核加入smp启动不起来

[quote]原帖由 "congli"]5.4-Release默认是把HTT打开的,5.4-Release-p1后就默认关闭,make world到p6后,再打开SMP选项试试.[/quote 发表:

看来只好试试,另外怎么知道内核升级到p6了?

论坛徽章:
1
寅虎
日期:2013-09-29 23:15:15
10 [报告]
发表于 2005-07-30 21:30 |只看该作者

HP DL380G4双cpu安装BSD后只认到一个cpu,内核加入smp启动不起来

%uname -a
  1. FreeBSD FreeBSD 5.4-RELEASE-p6 FreeBSD 5.4-RELEASE-p6 #0: Sat Jul 30 16:03:32 CST 2005     root@FreeBSD:/usr/obj/usr/src/sys/PF  i386
复制代码
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP