免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 1931 | 回复: 3
打印 上一主题 下一主题

[SCO UNIX] Failed to start the PMD Connection thread [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2005-09-01 19:01 |只看该作者 |倒序浏览
Failed to start the PMD Connection thread

求助:
先是
LOGIN: ERROR- Failed to initialize policy manager. (IFOR_PM_FATAL)
  The status from the policy manager demon (PMD - /etc/ifor_pmd) indicates
  that a serious error condition has occurred.  Login is allowed, but the
  system administrator is strongly advised to consult the SCO online Support
  Solutions Library (SSL) for assistance; if the SSL is inaccessible,
  please contact your SCO Support representative.
(cont)

查看资料后,得知是许可管理出了问题。说是ifor_pmd进程没有起动。
root注册,手工起动ifor_pmd后,就出现了标题中的错误提示。
也没资料可找了。
请帮帮忙。

论坛徽章:
0
2 [报告]
发表于 2005-09-01 19:04 |只看该作者

Failed to start the PMD Connection thread

#ps -e |grep ifor
   49       ?    00:00:00 ifor_pmd
28574       ?    00:00:14 ifor_pmd
28576       ?    00:00:01 ifor_sld
19441       ?    00:00:00 ifor_sld
19416       ?    00:00:00 ifor_pmd
19419       ?    00:00:00 ifor_sld


在sco 5.0.5, 出现了有一个月左右。

论坛徽章:
1
荣誉版主
日期:2011-11-23 16:44:17
3 [报告]
发表于 2005-09-01 19:09 |只看该作者

Failed to start the PMD Connection thread

首先要保证你的license是合法有效并且网内不重复的,否则任何解决办法都可能没有用
http://osr5doc.ca.sco.com:457/HANDBOOK/licmanT.policy_mgr.html

论坛徽章:
0
4 [报告]
发表于 2005-09-01 19:47 |只看该作者

Failed to start the PMD Connection thread

刚发了求助帖子就发现你的同样贴子了.^_^
to CNL :
  以前我们网内有很多台测试用机器都是同一个license都没有问题啊.

我的问题:

在平时操作时经常会在控制界面上出现如下内容:

business#LOGIN: ERROR- Failed to initialize policy manager. (IFOR_PM_FATAL)
The status from the policy manager demon (PMD - /etc/ifor_pmd) indicates
that a serious error condition has occurred.  Login is allowed, but the
system administrator is strongly advised to consult the SCO online Support
Solutions Library (SSL) for assistance; if the SSL is inaccessible,
please contact your SCO Support representative.
(cont)

对比另外一台机器发现根目录下缺少了一个pmd的连接目录,连往/var/opt/K/SCO/Unix/5.0.5Eb/pmd/pmd,一时不想找ln的命令格式,直接从正常的机器cpio打包了正确的连接放到这台机器上,然后reboot重启,就不能启动了.

由于机器在远程,看不到控制台界面,只看到重启后有一段时间能够ping通主机和telnet进去,但很快就失去通讯,再重启还是同样现象.

请教高手问题何在,怎么解决?
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP