linux 上刻录ISO文件遇到的问题?

wallace888

命令如下:
[root@localhost ~]# cdrecord -scanbus
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 J&rg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in this version.
scsidev: 'ATA'
devname: 'ATA'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c  1.83 04/05/20 Copyright 1997 J. Schilling').
scsibus1:
        1,0,0   100) *
        1,1,0   101) 'ATAPI   ' 'CDRW 52X24      ' 'FCCS' Removable CD-ROM
        1,2,0   102) *
        1,3,0   103) *
        1,4,0   104) *
        1,5,0   105) *
        1,6,0   106) *
        1,7,0   107) *
开始刻录,出现如下错误:
[root@localhost ~]# cdrecord -v speed=8 dev=1,1,0 /home/wallace/OpenBSD_3.7_i386_CNFUG.iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 J&rg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
scsidev: '1,1,0'
scsibus: 1 target: 1 lun: 0
cdrecord: Success. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
[root@localhost ~]# mount
/dev/hda2 on / type ext3 (rw)
none on /proc type proc (rw)
none on /sys type sysfs (rw)
none on /dev/pts type devpts (rw,gid=5,mode=620)
usbfs on /proc/bus/usb type usbfs (rw)
/dev/hda1 on /boot type ext3 (rw)
none on /dev/shm type tmpfs (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)

wallace888

顶!

我

试一试：
cdrecord dev=ATAPI:1,1,0 /home/wallace/OpenBSD_3.7_i386_CNFUG.iso

jxg945

原帖由 wallace888 于 2005-10-27 10:33 发表
命令如下:
[root@localhost ~]# cdrecord -scanbus
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 J&rg Schilling
Note: This version is an unofficial (modified) version with ...

我觉得你的盘可能以前刻录过东西吧.它提示你加-tao,如果cdrecord版本过旧,这个选项是默认的,它让你加,你加上-tao看看
-tao是多段刻录模式.我个人感觉是这个原因.

采风

cdrecord: Success. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.

jxg945

原帖由 采风 于 2005-11-22 17:45 发表
cdrecord: Success. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.

可能和内核有关  你的内核不支持SCSI设备吧  你的刻录机是外接的吗