论坛徽章:: 0

电梯直达

1楼 [收藏(0)] [报告]

发表于 2005-11-10 11:22 |只看该作者 |倒序浏览

利用终端的方式进行安装，安装的机器是E250 安装过程中的提示信息如下：  由于信息过多，还请高手帮忙仔细看一下，多谢了。

Can't open input device.
screen not found.
Can't open input device.
Keyboard not present.  Using ttya for input and output.
Keyboard not present.  Using ttya for input and output.

Sun (TM) Enterprise 250 (2 X UltraSPARC-II 400MHz), No Keyboard
OpenBoot 3.16, 512 MB memory installed, Serial #11661435.
Ethernet address 8:0:20:b1:f0:7b, Host ID: 80b1f07b.

Initializing Memory |
{0} ok
{0} ok
{0} ok boot cdrom
Boot device: /pci@1f,4000/scsi@3/disk@6,0:f  File and args:
SunOS Release 5.8 Version Generic_108528-29 64-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
Configuring /dev and /devices
Using RPC Bootparams for network configuration information.
Skipping interface hme0
Searching for configuration file(s)...

Select a Language

0. English
1. French
2. German
3. Italian
4. Japanese
5. Korean
6. Simplified Chinese
7. Spanish
8. Swedish
9. Traditional Chinese

Please make a choice (0 - 9), or press h or ? for help: 0

Select a Locale

0. English (C - 7-bit ASCII)
1. Albania (ISO8859-2)
2. Australia (ISO8859-1)
3. Belgium-Flemish (ISO8859-1)
4. Belgium-Flemish (ISO8859-15 - Euro)
5. Bosnia (ISO8859-2)
6. Brazil (ISO8859-1)
7. Bulgaria (ISO8859-5)
8. Canada-English (ISO8859-1)
9. Catalan,Spain (ISO8859-1)
  10. Catalan,Spain (ISO8859-15 - Euro)
  11. Croatia (ISO8859-2)
  12. Czech Republic (ISO8859-2)
  13. Denmark (ISO8859-1)
  14. Denmark (ISO8859-15 - Euro)
  15. Egypt (ISO8859-

  16. Estonia (ISO8859-15)
  17. Finland (ISO8859-1)
  18. Finland (ISO8859-15 - Euro)

Press Return to show more choices.
Please make a choice (0 - 51), or press h or ? for help:
Select a Locale

  19. Great Britain (ISO8859-1)
  20. Great Britain (ISO8859-15 - Euro)
  21. Greece (ISO8859-7)
  22. Hungary (ISO8859-2)
  23. Iceland (ISO8859-1)
  24. Ireland (ISO8859-1)
  25. Ireland (ISO8859-15 - Euro)
  26. Israel (ISO8859-6)
  27. Latvia (ISO8859-13)
  28. Lithuania (ISO8859-13)
  29. Macedonia (ISO8859-5)
  30. Netherlands (ISO8859-1)
  31. Netherlands (ISO8859-15 - Euro)
  32. New Zealand (ISO8859-1)
  33. Norway (ISO8859-1 - Bokmal)
  34. Norway (ISO8859-1 - Nynorsk)
  35. Poland (ISO8859-2)
  36. Portugal (ISO8859-1)
  37. Portugal (ISO8859-15 - Euro)

文库|博客

我没上过学

白手起家

论坛徽章:: 0

2楼 [报告]

发表于 2005-11-10 11:23 |只看该作者

Press Return to show more choices.
Please make a choice (0 - 51), or press h or ? for help: 19
What type of terminal are you using?
1) ANSI Standard CRT
2) DEC VT52
3) DEC VT100
4) Heathkit 19
5) Lear Siegler ADM31
6) PC Console
7) Sun Command Tool

Sun Workstation
9) Televideo 910
10) Televideo 925
11) Wyse Model 50
12) X Terminal Emulator (xterms)
13) Other
Type the number of your choice and press Return: 3
The system is coming up.  Please wait.
in.rdisc: No interfaces up
q The Solaris Installation Program qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  The Solaris installation program is divided into a series of short sections
  where you'll be prompted to provide information for the installation. At
  the end of each section, you'll be able to change the selections you've
  made before continuing.

  About navigation...
      - The mouse cannot be used
      - If your keyboard does not have function keys, or they do not
      respond, press ESC; the legend at the bottom of the screen
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
q Identify This System qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  On the next screens, you must identify this system as networked or
  non-networked, and set the default time zone and date/time.

  If this system is networked, the software will try to find the information
  it needs to identify your system; you will be prompted to supply any
  information it cannot find.

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
q Network Connectivity qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  Specify Yes if the system is connected to the network by one of the Solaris
  or vendor network/communication Ethernet cards that are supported on the
  Solaris CD. See your hardware documentation for the current list of
  supported cards.
  Specify No if the system is connected to a network/communication card that
  is not supported on the Solaris CD, and follow the instructions listed under
  Help.

   Networked
   qqqqqqqqq
   [X] Yes
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
q DHCP qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  On this screen you must specify whether or not this system should use DHCP
  for network interface configuration.  Choose Yes if DHCP is to be used, or
  No if the interfaces are to be configured manually.

  WARNING: Because this machine booted from the network, DHCP support will not
  be enabled, if selected, until after the system reboots.

   Use DHCP
   qqqqqqqq
   [ ] Yes
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
q Host Name qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  On this screen you must enter your host name, which identifies this system
  on the network.  The name must be unique within your domain; creating a
  duplicate host name will cause problems on the network after you install
  Solaris.

  A host name must be at least two characters; it can contain letters, digits,
  and minus signs (-).

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
q IP Address qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  On this screen you must enter the Internet Protocol (IP) address for this
  system.  It must be unique and follow your site's address conventions, or a
  system/network failure could result.

  IP addresses contain four sets of numbers separated by periods (for example
  129.200.9.1).

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
q Subnets qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  On this screen you must specify whether this system is part of a subnet.  If
  you specify incorrectly, the system will have problems communicating on the
  network after you reboot.

  > To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].

   System part of a subnet
   qqqqqqqqqqqqqqqqqqqqqqq
   [X] Yes
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
q Netmask qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  On this screen you must specify the netmask of your subnet.  A default
  netmask is shown; do not accept the default unless you are sure it is
  correct for your subnet.  A netmask must contain four sets of numbers
  separated by periods (for example 255.255.255.0).

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
q IPv6 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  On this screen you should specify whether or not IPv6, the next generation
  Internet Protocol, will be enabled on this machine.  Enabling IPv6 will have
  no effect if this machine is not on a network that provides IPv6 service.
  IPv4 service will not be affected if IPv6 is enabled.

  > To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].

   Enable IPv6
   qqqqqqqqqqq
   [ ] Yes
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
q Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  > Confirm the following information.  If it is correct, press F2;
to change any information, press F4.

               Networked: Yes
               Use DHCP: No
               Host name: DQEMMI
               IP address: 10.101.0.102
System part of a subnet: Yes
                  Netmask: 255.255.0.0
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
  Just a moment...
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
q Configure Security Policy: qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  Specify Yes if the system will use the Kerberos security mechanism.

  Specify No if this system will use standard UNIX security.

   Configure Kerberos Security
   qqqqqqqqqqqqqqqqqqqqqqqqqqq
   [ ] Yes
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
q Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  > Confirm the following information.  If it is correct, press F2;
to change any information, press F4.

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
  Please wait...
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
q Name Service qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？

我没上过学

白手起家

论坛徽章:: 0

3楼 [报告]

发表于 2005-11-10 11:24 |只看该作者

On this screen you must provide name service information.  Select the name
  service that will be used by this system, or None if your system will either
  not use a name service at all, or if it will use a name service not listed
  here.

  > To make a selection, use the arrow keys to highlight the option
and press Return to mark it [X].

   Name service
   qqqqqqqqqqqq
   [X] NIS+
   [ ] NIS
   [ ] DNS
   [ ] LDAP
   [ ] None

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
   [X] NIS+
   [ ] NIS
   [ ] DNS
   [ ] LDAP
   [ ] NIS+
   [ ] NIS
   [ ] DNS
   [ ] LDAP
q Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  > Confirm the following information.  If it is correct, press F2;
to change any information, press F4.

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
  Just a moment...
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
done.
q Time Zone qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  On this screen you must specify your default time zone.  You can specify a
  time zone in three ways:  select one of the geographic regions from the
  list, select other - offset from GMT, or other - specify time zone file.

  > To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].

   Regions
   qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
  ^ [ ] Asia, Western
  x [ ] Australia / New Zealand
  x [ ] Canada
  x [ ] Europe
  x [ ] Mexico
  x [ ] South America
  x [X] United States
  x [ ] other - offset from GMT
  - [ ] other - specify time zone file

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
  x [X] United States
  x [ ] other - offset from GMT
  x [ ] United States
  x [ ] other - offset from GMT
q Time Zone File qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  Specify the time zone file you want to use.  The file must already be in the
  /usr/share/lib/zoneinfo directory.  You do not need to enter the full path.

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq



qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
q Date and Time qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  > Accept the default date and time or enter
new values.

  Date and time: 2005-11-10 10:48

Year (4 digits) : 2005
Month  (1-12)    : 11
Day (1-31)    : 10
Hour (0-23)    : 10
  Date and time: 2005-11-10 10:48

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
q Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  > Confirm the following information.  If it is correct, press F2;
to change any information, press F4.

      Time zone: UTC
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
  Please wait...
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
System identification is completed.
Starting Solaris installation program...
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
q Warning qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
      No disks found.

      > Check to make sure disks are cabled and
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
#
#
#
#

为什么会提示信息Check to make sure disks ate cabled and ......?

另外最上边的
Can't open input device.
screen not found.
Can't open input device.
Keyboard not present.  Using ttya for input and output.
Keyboard not present.  Using ttya for input and output.
是什么意思？键盘不能用？看不明白，希望指点一下，多谢。

我查了一下，硬盘的指示灯也是亮的。