为什么我的mrtg会出现这种问题?

zhonghaiwei

SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.1.8" [192.168.1.8].161)
community: "private"
request ID: 851445730
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
SNMPGET Problem for ifInOctets.15 ifOutOctets.15 sysUptime sysName on private@192.168.1.8:
WARNING: skipping because at least the query for ifInOctets.15 on 192.168.1.8
did not succeed
WARNING: no data for ifInOctets&ifOutOctetsrivate@192.168.1.8. Skipping furth
er queries for Host 192.168.1.8 in this round.
ERROR: Target[192.168.1.8_15][_IN_] ' $$target[8]{$mode} ' did not eval into de
fined data
ERROR: Target[192.168.1.8_15][_OUT_] ' $$target[8]{$mode} ' did not eval into d
efined data
WARNING: Skipping Update of 192.168.1.8_15, inlast is not defined
WARNING: Skipping Update of 192.168.1.8_15, outlast is not defined
每天都会出现这种情况,要重新运行perl mrtg mrtg.cfg才行

bingosek

你到192.168.1.8的snmp包没有相应,估计是丢包了

zhonghaiwei

但是我ping交换机没有丢包的现象,请老兄帮个忙解决一下.最可能出现的问题在那

zhonghaiwei

再次请教!

jeffwang8001

先确定snmp agent启动，然后验证一下community，还有端口号是否正确