FreeBSD ADSL(PPPoE)step by step[原创]

coderror

1.关于Modem
确定你的ADSL Modem己经接入Internet


2.配置内核
你不再需要为 PPPoE 配置你的内核。 如果netgraph支持的话，就无需进入内核built,ppp将会动态装载

3.设置ppp.conf
下面以ppp.conf为例:

default:
  set log Phase tun command # you can add more detailed logging if you wish
  set ifaddr 10.0.0.1/0 10.0.0.2/0

name_of_service_provider:
  set device PPPoE:xl1 # replace xl1 with your Ethernet device
  set authname YOURLOGINNAME # replace YOURLOGINNAME
  set authkey YOURPASSWORD # replace YOURPASSWORD
  set dial
  set login
  add default HISADDR

4.运行ppp
必须是root，才能运行:

# ppp -ddial name_of_service_provider

5.引导ppp
把下列各项加放到 /etc/rc.conf文件中:

ppp_enable="YES"
ppp_mode="ddial"
ppp_nat="YES"   # if you want to enable nat for your local network, otherwise NO
ppp_profile="name_of_service_provider"


by coderror

[ 本帖最后由 rainren 于 2005-12-20 15:19 编辑 ]