免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 2942 | 回复: 2
打印 上一主题 下一主题

[FreeBSD] 求助 我的raid0老实出错 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2006-01-28 11:19 |只看该作者 |倒序浏览
我的服务器为什么老是出现下面的错误ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=
我的dmesg信息
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p3 #0: Sun Jan 22 06:56:27 CST 2006
root@movie1.zp.net:/usr/obj/usr/src/sys/mov1
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
AMD Features=0x20000000<LM>
Hyperthreading: 2 logical CPUs
real memory = 2147278848 (2047 MB)
avail memory = 2100563968 (2003 MB)
ACPI APIC Table: <A M I OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 9 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 0 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 7 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 5 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 0 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network, ethernet> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <display, VGA> at device 2.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0xec00-0xec3f mem 0xdefa0000-0xdefbffff irq 16 at device 3.0 on pci4
em0: Ethernet address: 00:0e:0c:3b:a3:c5
em0: Speed:N/A Duplex:N/A
atapci0: <HighPoint HPT302 UDMA133 controller> port 0xe480-0xe487,0xe400-0xe403,0xe080-0xe087,0xe000-0xe003,0xd800-0xd8ff irq 21 at device 4.0 on pci4
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <HighPoint HPT302 UDMA133 controller> port 0xdc00-0xdc07,0xd480-0xd483,0xd400-0xd407,0xd080-0xd083,0xc800-0xc8ff irq 20 at device 5.0 on pci4
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
isab0: <CI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci2: <Intel 6300ESB UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci2
ata1: <ATA channel 1> on atapci2
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <ower Button> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xcb800-0xcc7ff,0xcc800-0xcd7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad0: 152627MB <Seagate ST3160021A 3.06> at ata0-master UDMA100
ad4: 152627MB <Seagate ST3160021A 3.04> at ata2-master UDMA100
ad5: 152627MB <Seagate ST3160021A 8.01> at ata2-slave UDMA100
ad6: 152627MB <Seagate ST3160021A 8.01> at ata3-master UDMA100
ad7: 152627MB <Seagate ST3160021A 8.01> at ata3-slave UDMA100
ad8: 152627MB <Seagate ST3160021A 8.01> at ata4-master UDMA100
GEOM_STRIPE: Device st0 created (id=469030411).
GEOM_STRIPE: Disk ad4 attached to st0.
ad9: 152627MB <Seagate ST3160021A 8.01> at ata4-slave UDMA100
GEOM_STRIPE: Disk ad5 attached to st0.
ad10: 152627MB <Seagate ST3160021A 3.04> at ata5-master UDMA100
GEOM_STRIPE: Disk ad6 attached to st0.
ad11: 152627MB <Seagate ST3160021A 3.04> at ata5-slave UDMA100
GEOM_STRIPE: Disk ad7 attached to st0.
ar0: 1221022MB <HighPoint v3 RocketRAID RAID0 (stripe 64 KB)> status: READY
ar0: disk0 READY using ad8 at ata4-master
ar0: disk1 READY using ad9 at ata4-slave
ar0: disk2 READY using ad10 at ata5-master
ar0: disk3 READY using ad11 at ata5-slave
ar0: disk4 READY using ad4 at ata2-master
ar0: disk5 READY using ad5 at ata2-slave
ar0: disk6 READY using ad6 at ata3-master
ar0: disk7 READY using ad7 at ata3-slave
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
GEOM_STRIPE: Disk ad8 attached to st0.
GEOM_STRIPE: Disk ad9 attached to st0.
GEOM_STRIPE: Disk ad10 attached to st0.
GEOM_STRIPE: Disk ad11 attached to st0.
GEOM_STRIPE: Device st0 activated.
Trying to mount root from ufs:/dev/ad0s1a
em0: link state changed to UP
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=130364272
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=230284416
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=156571824
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=137794408
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=45214816
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=45214824
ad4: TIMEOUT - READ_DMA retrying (0 retries left) LBA=45214824
ad4: FAILURE - READ_DMA timed out LBA=45214824
g_vfs_done():stripe/st0a[READ(offset=185199853568, length=131072)]error = 5
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=45214816
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=45214848
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=45214856
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=45215592
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=45215624
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=137796112
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=137799096
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=137799232
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=137799296
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=137799392
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=137801120
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=137801232
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=203242680
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=230564280
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=156801016
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=115495776
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=141792688
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=141792824
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=40606496
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=230096296
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=40745776
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=132996352
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=230381016

我的内核
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US ... lconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.429.2.3.2.1 2005/10/28 19:22:41 jhb Exp $

machine i386
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident mov1

# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.

#makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols

options SCHED_ULE # ULE scheduler
#options SCHED_4BSD # 4BSD scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
#options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options MD_ROOT # MD is a potential root device
#options NFSCLIENT # Network Filesystem Client
#options NFSSERVER # Network Filesystem Server
#options NFS_ROOT # NFS usable as /, requires NFSCLIENT
#options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options ADAPTIVE_GIANT # Giant mutex is adaptive.

device apic # I/O APIC

# Bus support.
device eisa
device pci

# Floppy drives
#device fdc

# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering

# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#device amd # AMD 53C974 (Tekram DC-390(T))
#device isp # Qlogic family
#device ispfw # Firmware for QLogic HBAs- normally a module
#device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device trm # Tekram DC395U/UW/F DC315U adapters

#device adv # Advansys SCSI adapters
#device adw # Advansys wide SCSI adapters
#device aha # Adaptec 154x SCSI adapters
#device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device bt # Buslogic/Mylex MultiMaster SCSI adapters

#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50

# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)
#device ses # SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
#device amr # AMI MegaRAID
#device arcmsr # Areca SATA II RAID
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device ciss # Compaq Smart RAID 5*
#device dpt # DPT Smartcache III, IV - See NOTES for options
#device hptmv # Highpoint RocketRAID 182x
#device iir # Intel Integrated RAID
#device ips # IBM (Adaptec) ServeRAID
#device mly # Mylex AcceleRAID/eXtremeRAID
#device twa # 3ware 9000 series PATA/SATA RAID

# RAID controllers
#device aac # Adaptec FSA RAID
#device aacp # SCSI passthrough for aac (requires CAM)
#device ida # Compaq Smart RAID
#device mlx # Mylex DAC960 family
#device pst # Promise Supertrak SX6000
#device twe # 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
#device psm # PS/2 mouse

device vga # VGA video card driver

device splash # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device sc

# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor

device agp # support several AGP chipsets

# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device cbb # cardbus (yenta) bridge
#device pccard # PC Card (16-bit) bus
#device cardbus # CardBus (32-bit) bus

# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device puc

# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 adapter Gigabit Ethernet Card
#device ixgb # Intel PRO/10GbE Ethernet Card
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#device bfe # Broadcom BCM440x 10/100 Ethernet
#device bge # Broadcom BCM570xx Gigabit Ethernet
#device dc # DEC/Intel 21143 and various workalikes
#device fxp # Intel EtherExpress PRO/100B (82557, 8255
#device lge # Level 1 LXT1001 gigabit Ethernet
#device nge # NatSemi DP83820 gigabit Ethernet
#device nve # nVidia nForce MCP on-board Ethernet Networking
#device pcn # AMD Am79C97x PCI 10/100(precedence over 'lnc')
#device re # RealTek 8139C+/8169/8169S/8110S
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device ti # Alteon Networks Tigon I/II gigabit Ethernet
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vge # VIA VT612x gigabit Ethernet
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs. pccard NICs included.
#device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device ex # Intel EtherExpress Pro/10 and Pro/10+
#device ep # Etherlink III based cards
#device fe # Fujitsu MB8696x based cards
#device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device lnc # NE2100, NE32-VL Lance Ethernet cards
#device sn # SMC's 9000 series of Ethernet chips
#device xe # Xircom pccard Ethernet

# ISA devices that use the old ISA shims
#device le

# Wireless NIC cards
#device wlan # 802.11 support
#device an # Aironet 4500/4800 802.11 wireless NICs.
#device awi # BayStack 660 and others
#device ral # Ralink Technology RT2500 wireless NICs.
#device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
#device sl # Kernel SLIP
#device ppp # Kernel PPP
#device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
#device md # Memory "disks"
#device gif # IPv6 and IPv4 tunneling
#device faith # IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter

# USB support
#device uhci # UHCI PCI->USB interface
#device ohci # OHCI PCI->USB interface
#device ehci # EHCI PCI->USB interface (USB 2.0)
#device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
#device ugen # Generic
#device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
#device ums # Mouse
#device ural # Ralink Technology RT2500USB wireless NICs
#device urio # Diamond Rio 500 MP3 player
#device uscanner # Scanners
# USB Ethernet, requires miibus
#device aue # ADMtek USB Ethernet
#device axe # ASIX Electronics USB Ethernet
#device cdce # Generic USB over Ethernet
#device cue # CATC USB Ethernet
#device kue # Kawasaki LSI USB Ethernet
#device rue # RealTek RTL8150 USB Ethernet

# FireWire support
device firewire # FireWire bus code
device sbp # SCSI over FireWire (Requires scbus and da)
device fwe # Ethernet over FireWire (non-standard!)
options SMP # Symmetric MultiProcessor Kernel

这台机子是我放电影用的上面只装了samba和vsftp 下面有300台机子浏览这台机子上面的东西. 我不知道为什么这台机子上面的raid0老是出问题(这都已经成为我的噩梦了)

论坛徽章:
0
2 [报告]
发表于 2006-01-28 11:42 |只看该作者

今天更严重

哎 昨天还只是提示这些
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=130364272
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=230284416
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=156571824
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=137794408
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=45214816
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=45214824
ad4: TIMEOUT - READ_DMA retrying (0 retries left) LBA=45214824
ad4: FAILURE - READ_DMA timed out LBA=45214824
g_vfs_done():stripe/st0a[READ(offset=185199853568, length=131072)]error = 5
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=45214816
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=45214848
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=45214856
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=45215592
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=45215624
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=137796112
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=137799096
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=137799232
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=137799296
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=137799392
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=137801120
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=137801232
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=203242680
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=230564280
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=156801016
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=115495776
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=141792688
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=141792824
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=40606496
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=230096296
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=40745776
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=132996352
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=230381016

今天直接就进单用户模式 哎  郁闷

论坛徽章:
0
3 [报告]
发表于 2006-01-28 20:54 |只看该作者
给硬盘额外配个电源试试看.
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP