有路由问题请教

zhangchi1973

181网段的路由如下
S    192.168.193.0/24 is directly connected, Serial0/0:1
C    192.168.181.0/24 is directly connected, FastEthernet0/0
     10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C       10.0.15.0/24 is directly connected, Serial0/0:1
S       10.2.21.128/27 [1/0] via 10.0.15.2
193网段的设置如下
C    192.168.193.0/24 is directly connected, FastEthernet0/0
     10.0.0.0/24 is subnetted, 1 subnets
C       10.0.15.0 is directly connected, Serial1/0:0
S*   0.0.0.0/0 is directly connected, Serial1/0:0  
端口状态181网段的外网端口
Serial0/0:1 is up, line protocol is up
  Hardware is DSX1
  Internet address is 10.0.15.3/24
192网段的外网端口
Serial1/0:0 is up, line protocol is up
  Hardware is DSX1
  Internet address is 10.0.15.2/24


拓扑如下：
192.168.181.227---------192.168.181.222（路由内网端口）-10.0.15.3（路由外网端口）----------10.0.15.2（路由外网端口）-----192.168.193.141（路由内网端口）---------

192.168.193.141上ping不通192.168.181.227
但是192.168.181.227可以ping通192.168.193.141

terry76

192.168.181.227这台机是否开了防火墙？

shidaihulian

应该是网段地址出了问题啊，路径表有没正确呢？

sleepcats

192.168.181.227同网段的机器能ping通192.168.181.227吗？192.168.193.141能ping同192.168.181.222吗？

丝竹

原帖由 zhangchi1973 于 2006-3-7 18:37 发表
181网段的路由如下
zhangchi(63199630) 17:39:59
S    192.168.193.0/24 is directly connected, Serial0/0:1
C    192.168.181.0/24 is directly connected, FastEthernet0/0
     10.0.0.0/8 is variably s ...

从这看，你好像多了一条静态路由，删掉改成默认路由看看。