请问怎么会出现error: C compiler cannot create executables的错误？

william.xiao

错误： C compiler cannot create executables
原因：
解决：sudo apt-get gcc libc6-dev

错误：checking for C compiler default output... configure: error: C compiler cannot create executables
原因：
解决：sudo apt-get install libc6-dev

错误：configure: error: C++ preprocessor "/lib/cpp" fails sanity check
原因：gcc的组件没装全
解决：apt-get install build-essential

错误： Can't find X includes. Please check your installation and add the correct paths!
原因：没有X的包含文件
解决：安装xlibs-dev即可

错误： Qt (>= Qt 3.0) (headers and libraries) not found. Please check your installation!
原因：查找提供qt的lib&&headers的软件包,并安装之
解决：apt-get install libqt3-headers libqt3-mt-dev

错误：in the prefix, you've chosen, are no KDE headers installed. This will fail.
So, check this please and use another prefix!
原因：install a KDE application in a Gnome environment。
解决：which basically means its going to want to install a lot of KDE specific packages to work. This 'configure:error'
is due to it expecting you to be running KDE and again refers to some 'headers'.
sudo apt-get update
sudo apt-get install kdelibs4-dev kdelibs4c2a

错误：./admin/cvs.sh: 585: autoconf: not found
原因：
解决：apt-get install autoconf

错误： *** GTK >= 2.4.0 not installed! ***
原因：没装GTK
解决：apt-get build-dep gedit

错误：heching for gtk-config... no
checking for GTK - version = 1.2.0... no
*** The gtk-config script installed by GTK could not be found
*** If GTK was installed in PREFIX, make sure PREFIX/bin is in
*** your path, or set the GTK_CONFIG enviroment variable to the
*** full path to gtk-config.
configure: error: Cannot find GTK: Is gtk-config in path?
原因：
解决：sudo apt-get install libgtk1.2-dev

问题：eclipse中encoding不支持中文
解决：编辑/var/lib/locales/supported.d/local，加一行zh_CN.GBK GBK，执行sudo locale-gen

错误：gnome.h: No such file or directory

错误： No package 'libpanelapplet-2.0' found
原因：
解决：sudo apt-get install gnome-panel

问题：eva不弹出输入法
解决：sudo apt-get install scim-qtimm

问题：No package 'gtk+-2.0' found
No package 'gtksourceview-1.0' found
No package 'libgnomeui-2.0' found
No package 'libglade-2.0' found
No package 'libgnomeprintui-2.2' found
解决：sudo apt-get install libgtk2.0-dev libgtksourceview-dev libgnomeui-dev libglade2-dev libgnomeprint2.2-dev

问题：No package 'libpanelapplet-2.0' found
解决：sudo apt-get install libpanelappletmm-2.6-dev

william.xiao

另注意：
我在FEDORA 里 没有apt-get，用yum

claret

没有安装libiconv，安装后就可以解决了。看下边说明，摘自www.sunfreeware.com的gcc下载部分。
gcc-3.4.6-sol9-sparc-local.gz. The GNU C compiler and related programs - installs in /usr/local. This package includes the GNU C, C++, and f77 suites and support files. These gcc packages require the installation of libiconv. It was compiled to use the SUN assembler and loader usually in /usr/ccs/bin if the SUNW developer packages are installed. When needed and the source code supports it, this C compiler can create 64-bit executables via the -m64 flag as well as the usual 32-bit ones.

虫虫猫

安装gcc libc6-dev试试

hobbby1984

我这里的情况是在Fedora 12上面，自定义的LDFLAGS；
CFLAGS="-fPIE -Os -s -pipe -fsigned-char -O3 -g -pipe -fomit-frame-pointer -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=opteron -mmmx -msse2 -msse4a -fvisibility=hidden -static"
如果去掉最后的-static选项，就没有这个报错了。具体原因请高人指教

easybegin

libiconv  libgcc都装了没

nimysun

libiconv.so.2没有安装.
风之幻想 发表于 2006-04-12 14:53

    赫赫，是啊。首先得把gcc拾掇好，然后再编译。

你自己随便写个hello, world的c程序，然后用gcc编译一下，如果通过，那么再继续编译你的源代码。

xzby1

我也是 原来make ／lib/cpp fails sany check
装上glibc gcc-cpp
但是configure还是错误
不知道为什么
在rpm5.3.0的安装

xzby1

我也是 原来make ／lib/cpp fails sany check
装上glibc gcc-cpp
但是configure还是错误
不知道为什么
在rpm5.3.0的安装

xzby1

我也是 原来make ／lib/cpp fails sany check
装上glibc gcc-cpp
但是configure还是错误
不知道为什么
在rpm5.3.0的安装