升级编译2.6的启动问题-reiserfs

ciscoguy_2008

各位老大：

我升级编译2.6的启动时出现下面信息：
ide-floppy: Can't get floppy parameters
mice: PS/2 mouse device common for all mice
input: PC Speaker
Failed to disable AUX port, but continuing anyway... Is this a SiS?
If AUX port is really absent please use the 'i8042.noaux' option.
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
VFS: Cannot open root device "sdb2" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on unknown-block(0,0)

我root分区时reiserfs类型， 在kernel选项里已选为*

grub的启动配置是：
title Linux
    kernel (hd1,1)/boot/vmlinuz root=/dev/sdb2


各位， 请给予指导,急盼!!。

多谢了!

achaoge

看起来似乎是没有找到硬盘？

是scsi 还是 sata ，驱动有没有编译进内核？

ciscoguy_2008

是DELL的1850服务器，Megaraid Raid控制卡，SCSI硬盘．我编译的时候是选了静态加入内核了，不知道是不是真正成功编译进去内核了．

[ 本帖最后由 ciscoguy_2008 于 2006-4-28 22:35 编辑 ]