小问题~~

fmz5012637

在工作站里没有GSP怎么可以看到风扇的状态，怎么可以知道转速是正常的？另在K580上STM里看到CPU出现
Internal error : Failed to get the configuration
                          status of the CPU. HPA of processor in question is
                          (0xfffffffffffa0000).

更换CPU还是出现，在日志里也没什么问题~~~，急~

fmz5012637

咋就没人回复尼~~~~~~

李放

1.你先ioscan -f一把  应该是类似以下的信息
In ioscan Out put the processor(CPU0) is in claimed state.After replacing how to check,wether the cpu is replaced or not?

processor 0 32 processor CLAIMED PROCESSOR Processor
processor 1 34 processor CLAIMED PROCESSOR Processor
processor 2 36 processor CLAIMED PROCESSOR Processor
processor 3 38 processor CLAIMED PROCESSOR Processor
processor 4 44 processor CLAIMED PROCESSOR Processor
processor 5 46 processor CLAIMED PROCESSOR Processor

看看有无全部claimed

2:run cstm against the device.
#cstm press enter
cstm > map
note the dev num for the cpu
cstm > sel dev "dev num"
cstm > info log

fmz5012637

OK ~~~风扇问题？？怎么解决

fmz5012637

cup还是
Internal error : Failed to get the configuration
                          status of the CPU. HPA of processor in question is
                          (0xfffffffffffa0000).
The floating point exercise test is being executed on
                          FPU that is assigned to processor 0 (0x0) at path 32
                          (with HPA = 0xFFFFFFFFFFFA0000)
不会是主板有问题吧~~~~@！·#￥%……—*

李放

风扇问题  你直接也可以用 mstm 或者cstm 看  例：
Cabinet 0

Cabinet 0 Hardware Inventory:
   Component                        Present   Failure    State
   ---------                        -------   -------   -------
   Cabinet Fans (blowers)               5         0     unknown
   Cabinet Power Supplies               1         0     unknown
   I/O Power Supplies                   0                     
   BackPlane Power Supplies             0                     

   unknown - Firmware is unable to determine the state of the hardware.