log transfer must be ON

pana

Msg 15191, Level 12, State 0:
Server '****':
Log transfer for the RSSD '*******.*****' is OFF. To be able to create
a route from this site, log transfer must be ON.
问题出在哪??请各位高手指点~

hobbylu

alter connection to rep_server_name
set log transfer on
go

pana

rep_server_name 应该是data_server.name吧???
执行alter connection to dataserver.name set log trabsfer on
之后提示dataserver.name的rep agent state is down!正常情况????
本来是没有配置dataserver.name的rep agent的
此dataserver.name是rep的rssd

[ 本帖最后由 echoaix 于 2006-5-12 19:57 编辑 ]

pana

还是讲一下我的详细步骤~请各位高手们看看我错在哪~~万分感谢~~
一:建立repserver1,此repserver为IDserver
二:建立repserver2,此repserver的IDserver为repserver1
三:建立repserver2到repserver1的路由:
   1> create route to repserver1 set username user set password password
   2> go
   Log transfer for the RSSD 'NCEASERVER.cbncrep_RSSD' is OFF. To be able to create
   a route from this site, log transfer must be ON.
四:然后执行
   1> alter connection to dataserver.RSSD set log transfer on
     2> go
     Connection to 'dataserver.RSSD' is altered.
   这里的dataserver为repserver2的RSSD
五:问题出来了:dataserver.RSSD 的 rep agent state is down
                         此前没有配置此dataserver 的 rep agent
六:继续
1> create route to rep set username routeuser set password userroute
2> go
Route to 'rep' is being created.

如果还有什麽地方不详尽~请发问~谢谢
路由是建立了~
不过还没有测试~有个错误~dataserver的rep agent is down
迷惘中..........

[ 本帖最后由 pana 于 2006-5-12 17:13 编辑 ]

pana

各位老大~给点意见吧~跪求

1> admin version
2> go
Version
---------------------------------------------------------------------------------------------
Replication Server/12.5/EBF 11683/PC Intel/Windows NT 4.0/1/OPT/Wed Jan 21 11:3
         3:31 PST 2004

echoaix

不是很清楚你要干什么

[ 本帖最后由 echoaix 于 2006-5-12 20:02 编辑 ]

pana

我想建立repserver2到repserver1的路由