- 论坛徽章:
- 0
|
boot cdrom,
返回错误
boot device:/sbus@3,0/SUNW,fas@3,8800000/sd@6,0:f
can't read disk label
can't open disk label package
can't open boot device
You need to run
probe-scsi-all
and make sure this value is matched to your CD-ROM:
/sbus@3,0/SUNW,fas@3,8800000/sd@6,0:f
For some system, it takes: .../sd@6,0:a
我在之前在OK下做了
nvaliasi disk /sbus@3,0/SUNW,socal@d,10000/sf@0,0/ssd@w21000020376e2a36,0
reset-all (应该是reset,但是多输入了个-all)
是不是这个reset-all将cdrom给修改了,现在识别不出来了!
No.
It just changed the alias of "disk".
"reset-all" should be rejected by OpenBoot.
我在ok下执行probe-scsi,返回了:
Target 6
unit 0 Removeable Read only device TOSHIBA.....
That means OpenBoot can see your CD-ROM, but the
CD_ROM may be is not clean, or you put a wrong CD in it. |
|