论坛徽章:: 0

电梯直达

1楼 [收藏(0)] [报告]

发表于 2006-06-10 20:09 |只看该作者 |倒序浏览

DS20e上安装4.0F，在slot7、8、9上各安装了一块网卡，但操作系统起来后只能看到slot9上的网卡——tu0，另外两块网卡没有出现。
在FIRMWARE5.7-8下show conf可以看到：
PCI Hose 01
   Bus 00  Slot 07: DE600-AA
                                 eia0.0.0.7.1       00-50-8B-69-93-94
   Bus 00  Slot 08: DE600-AA
                                 eib0.0.0.8.1       00-50-8B-AE-92-02
   Bus 00  Slot 09: DE500-BA Network Controller
                                 ewa0.0.0.9.1       00-00-F8-07-85-D3
其中eia0的详细信息如下（eib0也差不多）：
eia0_arp_tries       3
eia0_bootp_file
eia0_bootp_server
eia0_bootp_tries       3
eia0_def_ginetaddr    0.0.0.0
eia0_def_inetaddr    0.0.0.0
eia0_def_inetfile
eia0_def_sinetaddr    0.0.0.0
eia0_def_subnetmask    0.0.0.0
eia0_ginetaddr       0.0.0.0
eia0_inet_init       bootp
eia0_inetaddr          0.0.0.0
eia0_inetfile
eia0_loop_count       3e8
eia0_loop_inc          a
eia0_loop_patt       ffffffffffffffff
eia0_loop_size       2e
eia0_lp_msg_node       1
eia0_mode             FastFD (Full Duplex)
eia0_protocols       BOOTP
eia0_sinetaddr       0.0.0.0
eia0_tftp_tries       3
在/var/adm/messages里面有这样一段：
Jun  9 14:12:02 cherod306da vmunix: PCI device at bus 1, slot 7, function 0 coul
d not be configured:
Jun  9 14:12:02 cherod306da vmunix: Vendor ID 0x8086, Device ID 0x1229, Base cla
ss 0x2, Sub class 0x0 Sub-VID 0xe11 Sub-DID 0xb144
Jun  9 14:12:02 cherod306da vmunix:    has no matching entry in the PCI option
table
Jun  9 14:12:02 cherod306da vmunix: PCI device at bus 1, slot 8, function 0 coul
d not be configured:
Jun  9 14:12:02 cherod306da vmunix: Vendor ID 0x8086, Device ID 0x1229, Base cla
ss 0x2, Sub class 0x0 Sub-VID 0xe11 Sub-DID 0xb144
Jun  9 14:12:02 cherod306da vmunix:    has no matching entry in the PCI option
table
Jun  9 14:12:02 cherod306da vmunix: pci1 at nexus
Jun  9 14:12:02 cherod306da vmunix: tu0: DECchip 21143: Revision: 3.0
Jun  9 14:12:02 cherod306da vmunix: tu0: auto negotiation capable device
Jun  9 14:12:02 cherod306da vmunix: tu0 at pci1 slot 9
Jun  9 14:12:02 cherod306da vmunix: tu0: DEC TULIP (10/100) Ethernet Interface,
hardware address: 00-00-F8-07-85-D3
Jun  9 14:12:02 cherod306da vmunix: tu0: auto negotiation off: selecting 100Base
TX (UTP) port: half duplex
Jun  9 14:12:02 cherod306da vmunix: gpc0 at isa0
Jun  9 14:12:02 cherod306da vmunix: PCI device at bus 0, slot 6, function 0 coul
d not be configured:
Jun  9 14:12:02 cherod306da vmunix: Vendor ID 0x9004, Device ID 0x7895, Base cla
ss 0x1, Sub class 0x0 Sub-VID 0x9004 Sub-DID 0x7895
Jun  9 14:12:02 cherod306da vmunix:    has no matching entry in the PCI option
table
Jun  9 14:12:02 cherod306da vmunix: PCI device at bus 0, slot 6, function 1 coul
d not be configured:
Jun  9 14:12:02 cherod306da vmunix: Vendor ID 0x9004, Device ID 0x7895, Base cla
ss 0x1, Sub class 0x0 Sub-VID 0x9004 Sub-DID 0x7895
Jun  9 14:12:02 cherod306da vmunix:    has no matching entry in the PCI option
table
列位帮帮忙，看看是什么问题？

文库|博客

江洋大盗

白手起家

论坛徽章:: 0

2楼 [报告]

发表于 2006-06-10 20:29 |只看该作者

补充一下

补充一下
我对网卡比较不知，大概看了一下：
slot7、8上插的同样的网卡，是100M的，卡背面标签为“COMPAQ NC3123”,正面有两块IC上都标注有“ATMEL”字样，还有一个IC上标注“PULSE”字样。
slot9上插的网卡是10/100M的，卡面积是那两块的两倍，卡的正面应该是处理器的大方形IC块上醒目的标注有“digital”“DEC”等字样，另，正面卡的PCB表面上也印有“digital”字样。