免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 1794 | 回复: 2
打印 上一主题 下一主题

求助:ultra10的asy1:silo overflow 问题 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2006-06-11 08:09 |只看该作者 |倒序浏览
ultra10的机器,启动进入CDE后,过几分钟跳出来,出现:
NOTICE:asy1:silo overflow
NOTICE:asy0:silo overflow
NOTICE:asy1:ring buffer overflow
的错误信息,然后进入到OK状态。
想请教一下,是不是主板有问题了?
谢谢回答!

论坛徽章:
0
2 [报告]
发表于 2006-06-11 09:40 |只看该作者
A "silo overflow" happens when input to a serial line comes in faster   than the computer can process it.


The "silo" referred to is a hardware input buffer associated with a serial port. The serial line hardware (e.g., ALM board) detects when the buffer overflows and sets a bit in a status register to warn the  computer that some incoming data was lost on a given line.

asy0 is a Asynchronous Serial Ports serial device
Name   asy0
Model Description   Asynchronous Serial Ports
Type   serial device
Unit   0
Node ID   -526576960

asy1 is a Asynchronous Serial Ports serial device
Name   asy1
Model Description   Asynchronous Serial Ports
Type   serial device
Unit   1
Node ID   -526577152

论坛徽章:
0
3 [报告]
发表于 2006-06-11 10:19 |只看该作者
那就是主板上有部件有问题?
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP