免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 1718 | 回复: 1
打印 上一主题 下一主题

我的linux终端不能接收ieee 802.3(RFC 1042)的IP包? [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2006-07-06 15:17 |只看该作者 |倒序浏览
我的网络连接如下

A----B1----B2-----C
其中A 和C 是linux 终端,B1和B2是cisco无线网桥,问题是
在A PING C的时候如果网桥是ieee 802.3的包(RFC 1042)而不是以太网的包(RFC 894)就PING不通,但是如果把C换成NT的终端就可以PING通.但是C可以收到A来的UDP报文.
用网络分析仪看了一下,好象是象上面我说的一样"linux终端不能接收ieee 802.3(RFC 1042)的IP包",具体表现在不能解析LLC?
我现在不太明白,可能分析的也不对.有哪个高手可以指点一下?

论坛徽章:
0
2 [报告]
发表于 2006-07-07 11:40 |只看该作者
大家看看抓的包
Frame 4 (68 bytes on wire, 68 bytes captured)
    Arrival Time: Jul  8, 2006 10:45:49.659089000
    Time delta from previous packet: 0.464130000 seconds
    Time relative to first packet: 0.519342000 seconds
    Frame Number: 4
    Packet Length: 68 bytes
    Capture Length: 68 bytes
IEEE 802.3 Ethernet
    Destination: ff:ff:ff:ff:ff:ff (Broadcast)
    Source: 00:20:0c:10:e4:b6 (Adastra_10:e4:b6)
    Length: 54
Logical-Link Control
    DSAP: SNAP (0xaa)
    IG Bit: Individual
    SSAP: SNAP (0xaa)
    CR Bit: Command
    Control field: U, func = UI (0x03)
        000. 00.. = Unnumbered Information
        .... ..11 = Unnumbered frame
    Organization Code: Encapsulated Ethernet (0x000000)
    Type: ARP (0x0806)
Address Resolution Protocol (request)
    Hardware type: Ethernet (0x0001)
    Protocol type: IP (0x0800)
    Hardware size: 6
    Protocol size: 4
    Opcode: request (0x0001)
    Sender MAC address: 00:20:0c:10:e4:b6 (Adastra_10:e4:b6)
    Sender IP address: 172.16.2.4 (172.16.2.4)
    Target MAC address: 00:00:00:00:00:00 (00:00:00_00:00:00)
    Target IP address: 172.16.6.66 (172.16.6.66)

是172.16.2.4 ping 172.16.6.66
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP