- 论坛徽章:
- 0
|
做了一个POST, 结果如下：
sc> resetsc
Are you sure you want to reset the SC [y/n]? y
User Requested SC Shutdown
ALOM POST 1.0
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Memory Parity Test
Memory Parity Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
ALOM POST 1.0
Status = 00007fff
Returned from Boot Monitor and Handshake
Clearing Memory Cells
Memory Clean Complete
Loading the runtime image...
SC Alert: SC System booted.
SC Alert: Host System has Reset
SC Alert: VOLTAGE_SENSOR @ MB.P0.V_CORE has exceeded low warning threshold.
[SC Status 7fff - OK] Enter #. to return to ALOM.
SC Alert: VOLTAGE_SENSOR @ MB.P1.V_CORE has exceeded low warning threshold.
SC Alert: VOLTAGE_SENSOR @ MB.V_VTT has exceeded low warning threshold.
SC Alert: VOLTAGE_SENSOR @ MB.V_VCCTM has exceeded low warning threshold.
SC Alert: VOLTAGE_SENSOR @ MB.V_+2V5 has exceeded low warning threshold.
SC Alert: VOLTAGE_SENSOR @ MB.V_+1V5 has exceeded low warning threshold. |
|
免费注册
发表于 2006-07-28 00:55
