cramfs: wrong magic

sniper167

哪位来帮忙分析下，问题是出在内核还是出在文件系统身上
谢谢
打印信息如下：
---------------------------------------------------------------------
VIVI version 0.1.4 (root@localhost.localdomain) (gcc version 2.95.2 20000516 (r6MMU table base address = 0x33DFC000
allocate S3C2410 NAND MTD device structure.
NAND device: Manufacture ID: 0xec, Chip ID: 0x79 (Samsung K9D1G08V0M)
Could not found stored vivi parameters. Use default vivi parameters.
Press Return to start the LINUX now, any other key for vivi300
Copy linux kernel from 0x00030000 to 0x30008000, size = 0x000c0000 ... done
zImage magic = 0x016f2818
Setup linux parameters at 0x30000100
linux command line is: "noinitrd root=/dev/mtdblock/1 init=/linuxrc console=tty"MACH_TYPE = 193
NOW, Booting Linux......
Uncompressing Linux...................................................... done,.Linux version 2.4.18-rmk7-pxa1 (root@localhost.localdomain) (gcc version 2.95.25CPU: ARM/CIRRUS Arm920Tsid(wb) revision 0
Machine: Samsung-SMDK2410
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
DEBUG: timer count 15626
Console: colour dummy device 80x30
Calibrating delay loop... 99.94 BogoMIPS     
Memory: 64MB = 64MB total
Memory: 62620KB available (1380K code, 328K data, 136K init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)   
POSIX conformance testing by UNIFIX   
Linux NET4.0 for Linux 2.4         
Based upon Swansea University Computer Society NET3.039  
Initializing RT netlink socket
CPU clock = 200.000 Mhz, HCLK = 100.000 Mhz, PCLK = 50.000 Mhz
Starting kswapd   
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS version 1.0, (C) 1999, 2000  Axis Communications AB
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
GPIO L3 bus interface for S3C2410, installed
ttyS%d0 at I/O 0x50000000 (irq = 52) is a S3C2410
ttyS%d1 at I/O 0x50004000 (irq = 55) is a S3C2410
ttyS%d2 at I/O 0x50008000 (irq = 5 is a S3C2410
test lcd start 0719
------------------1
------------------2
SAMSUNG LTV350QV 35IN LCD TEST.
------------------3
--------------------6
------------------4
--------------------6
Console: switching to colour frame buffer device 40x30
------------------5
Installed S3C2410 frame buffer
pty: 256 Unix98 ptys configured
BackLight was installed.
S3C2410 Real Time Clock Driver v0.2
S3C2410 ADC core was installed.
is_enables = 1
s3c2410 TSP was installed.
block: 128 slots per queue, batch=32
eth0: cs8900 rev K(3.3 Volts) found at 0xd0000300
cs89x0 media RJ-45, IRQ 37
NAND device: Manufacture ID: 0xec, Chip ID: 0x79 (Samsung K9D1G08V0M)
Creating 3 MTD partitions on "Samsung K9D1G08V0M":
0x00000000-0x00100000 : "kernel"
0x00100000-0x03d00000 : "root"
0x03d00000-0x03e00000 : "S3C2410 part3"
bon:cannot find partition table
bon:cannot find partition table
bon:cannot find partition table
Mtd Block 0.
Mtd Block 1.
Mtd Block 2.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com   
// 从这里开始出错  
cramfs: wrong magic
FAT: bogus logical sector size 65535