Trying to connect to primary server ...DR: Cannot connect to primary server

tcllxy

双机做hdr，在执行到onmode -d secondary proview_lab时，一直是fast recovery(sec)的状态
查看log
11:49:28  DR: new type = secondary, primary server name = proview_lab
11:49:28  DR: Trying to connect to primary server ...
11:49:28  DR: Cannot connect to primary server
11:49:28  DR: Turned off on secondary server
Wed Aug 16 12:44:47 2006

12:44:47  DR: DRAUTO is 0 (Off)
12:44:47  Informix Dynamic Server Version 7.31.TD5     Software Serial Number AAC#A605647
12:44:48  Informix Dynamic Server Initialized -- Shared Memory Initialized.
12:44:48  DR: Logs will be cleared during logical recovery
12:44:48  DR: Trying to connect to primary server ...
12:44:48  DR: Cannot connect to primary server
12:44:48  DR: Turned off on secondary server
12:44:49  Physical Recovery Started.
12:44:49  Physical Recovery Complete: 0 Pages Restored.
12:44:49  Dataskip is now OFF for all dbspaces
12:44:49  Restartable Restore has been ENABLED
12:44:49  Recovery Mode
12:46:25  (5) connection rejected - no calls allowed for sqlexec
12:46:25  listener-thread: err = -27002: oserr = 0: errstr = : No connections are allowed in Dynamic Server quiescent mode.


Wed Aug 16 12:52:43 2006

12:52:43  DR: DRAUTO is 0 (Off)
12:52:43  Informix Dynamic Server Version 7.31.TD5     Software Serial Number AAC#A605647
12:52:45  Informix Dynamic Server Initialized -- Shared Memory Initialized.
12:52:45  DR: Logs will be cleared during logical recovery
12:52:45  DR: Trying to connect to primary server ...
12:52:45  DR: Cannot connect to primary server
12:52:45  DR: Turned off on secondary server
12:52:45  Physical Recovery Started.
12:52:46  Physical Recovery Complete: 0 Pages Restored.
12:52:46  Dataskip is now OFF for all dbspaces
12:52:46  Restartable Restore has been ENABLED
12:52:46  Recovery Mode

在主机上看也是Cannot connect to secondary server
我在hosts,setnet32,service都有设置
hosts主机设为从机的ip及名字
hosts从机设为主机的ip及名字
setnet32都有设双方的数据库名，主机名，service
service分别加了两个服务
turbo  1526/tcp
proview 1528/tcp
如果在setnet32把对方机器拿掉以后，服务可以正常启动

请高手指点

大梦

把你详细步骤贴出来！

tcllxy

首先我在兩臺機器上安裝了windows 2000 server OS,分別都裝上了informix 7.31 td5，分別在兩臺機器上建立了空間及日志，在onconfig文件中把PHYSDBS 改成了dbs_log ,把物理日志和邏輯日志都改成了10240,在建邏輯日志時也是建的10240,把buffer及locks都作了相應的擴大，把DBSPACETEMP 改了新建的 DBS_TEMP，並且把備份設備都改成了磁盤上的文件， 到這步以後兩臺機器都能正常online
然後我在主機上使用dbimport 命令導入了以前做的一個數據的備份，使用ontape -s -U database -L 0進行備份
然後在主機hosts中加入了從機的ip及機器名，在service中看到已有了turbo 1526/tcp，在setnet32中把機器信息都設定成從機的信息，
然後在主機hosts中加入了主機的ip及機器名，在service中看到已有了turbo 1526/tcp，在setnet32中把機器信息都設定成主機的信息，並且還在system32/driver/etc下新建了一個hosts.equiv文件，　分別輸入對方的機器及用戶名
開起起hdr，在主機作了　ontape -s -L 0,然後onmode -d primary 從機
在從機作ontape -p恢復，onmode -d secondary　主機
從機一直是fast recory狀態，至日志裡面看就是11:49:28  DR: new type = secondary, primary server name = proview_lab
11:49:28  DR: Trying to connect to primary server ...
11:49:28  DR: Cannot connect to primary server
11:49:28  DR: Turned off on secondary server

請大夢幫忙分析一下，謝謝

tcllxy

我现在使用telnet 对方主机 1526，两台主机都可连通，但不知道怎么会两个机器用hdr连接不行
我只要在setnet32中把对方主机拿掉，informix就可以起来