求助;V480断电后无法启动

youngvv

480系统没镜像吗？

shenping2002

boot cdrom -s
cat vfstab   #confirm that no mirror used,if you use mirror with vxvm or SDS dismirror first
mount /dev/dsk/c1t0d0s0 /a
cp /platform/`uname -m`/ufsboot  /a/platform/`uname -m`/

roger0409

480系统没有镜像

rqalex

小弟这边的2台480也成这德行了，郁闷。顺便请问搂主最后是最么弄好的。

rqalex

#2号机可以正常启动，但不能加入到集群启用数据库。#1号机的启动状况和楼主的一样，光纤卡还亮着红灯。

huanglao2002

原帖由 rqalex 于 2007-4-22 18:22 发表
小弟这边的2台480也成这德行了，郁闷。顺便请问搂主最后是最么弄好的。

你可以试一下下面的方法

1 boot crom -s

2 # fsck -F ufs -y /dev/rdsk/c1t0d0s0

3 # mount -o rw /dev/dsk/c1t0d0s0 /a

4 check /etc/release

启动光盘 和 本机安装的solaris 要一致  
比如
# cat  /a/etc/release
    Solaris 9 9/05 s9s_u8wos_05 SPARC

5 # /usr/sbin/installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk /dev/rdsk/c1t0d0s0

rqalex

好像不行，我把执行的结果发给大家看看，请帮我想想办法。谢谢！
{2} ok boot cdrom -s
Boot device: /pci@8,700000/ide@6/cdrom@0,0:f  File and args: -s
SunOS Release 5.9 Version Generic_118558-34 64-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Configuring /dev and /devices
Using RPC Bootparams for network configuration information.
Skipping interface fcip0
Skipping interface ce6
Skipping interface ce5
Skipping interface ce4
Skipping interface ce3
Skipping interface ce2
Skipping interface ce1
Skipping interface ce0
/
INIT: SINGLE USER MODE
# fsck -F ufs -y /dev/rdsk/c1t0d0s0

** /dev/rdsk/c1t0d0s0
** Last Mounted on /a
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3a - Check Connectivity
** Phase 3b - Verify Shadows/ACLs
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cylinder Groups
44562 files, 1084528 used, 8992444 free (4316 frags, 1123516 blocks, 0.0% fragme
ntation)
# # mount -o rw /dev/dsk/c1t0d0s0 /a

# # check /etc/release

check: not found
# # format
Searching for disks...done


AVAILABLE DISK SELECTIONS:
       0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w21000011c652378e,0
       1. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w2100000c50f0b113,0
Specify disk (enter its number): ^D
# /usr/sbin/installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk /dev/rdsk/c1
t0d0s0
## init 6



INIT: New run level: 6
The system is coming down.  Please wait.
System services are now being stopped.





umount: /dev busy
The system is down.

The system is being restarted.
syncing file systems... done
rebooting...
Resetting ...


Software Reset

Enabling system bus....... Done
Initializing CPUs......... Done
Initializing boot memory.. Done
Initializing OpenBoot
Probing system devices
Probing I/O buses

Sun Fire 480R, No Keyboard
Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.17.1, 4096 MB memory installed, Serial #61872715.
Ethernet address 0:3:ba:b0:1a:4b, Host ID: 83b01a4b.





Rebooting with command: boot
     ERROR: Power Supply 1 not OK

     WARNING: Power Supply 1 general failure
Boot device: disk0  File and args:
Boot load failed.
The file just loaded does not appear to be executable.
{2} ok

[ 本帖最后由 rqalex 于 2007-4-23 13:45 编辑 ]

huanglao2002

我想是两种情况

1 Boot device: disk0  File and args:

disk0 的devalias有错误

2 disk0的  1 - 15 扇区坏了。

rqalex

真是郁闷，有太多的系统文件丢失了，不知道是咋搞的。看来是需要重装系统了。