论坛徽章:: 0

发表于 2006-08-23 20:57 |显示全部楼层

在命令行我可以输入 ifconfig eth0:1 192.168.117.67 broadcast 192.168.117.255 netmask 255.255.255.0 创建虚拟接口，但是一旦重启，就消失了，我需要把这句命令加到那个脚本中让他能开机自动执行。我在网上找到一些资料，但是在suse里面都不对，那位知道帮帮忙，先谢谢了

有人说加在/etc/init.d/boot.local，但是我试了不起作用

qsxing

丰衣足食

论坛徽章:: 0

发表于 2006-08-23 21:48 |显示全部楼层

$cd  /etc/sysconfig/network
$cat ifcfg-eth-id-00\:0c\:29\:2a\:80\:5a

BROADCAST='192.168.1.255'
IPADDR='192.168.1.233'
NETMASK='255.255.255.0'
NETWORK='192.168.1.0'
BOOTPROTO='static'
MTU=''
REMOTE_IPADDR=''
STARTMODE='onboot'
UNIQUE='7EWs.weGuQ9ywYPF'
_nm_name='bus-pci-0000:00:11.0'
IPADDR_0='192.168.1.234'    ---IP别名,从这里开始添加
NETMASK_0='255.255.255.0'
LABEL_0='1'                ---如果不加这一句,ifconfig -a 时候不显示出来

$ifconfig -a --查看IP
eth0    Link encap:Ethernet  HWaddr 00:0C:29:2A:80:5A
      inet addr:192.168.1.233  Bcast:192.168.1.255  Mask:255.255.255.0
      inet6 addr: fe80::20c:29ff:fe2a:805a/64 Scope:Link
      UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
      RX packets:36335 errors:0 dropped:0 overruns:0 frame:0
      TX packets:572 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:1000
      RX bytes:2419779 (2.3 Mb)  TX bytes:40405 (39.4 Kb)
      Interrupt:18 Base address:0x1080

eth0:1 Link encap:Ethernet  HWaddr 00:0C:29:2A:80:5A
      inet addr:192.168.1.234  Bcast:192.168.1.255  Mask:255.255.255.0
      UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
      Interrupt:18 Base address:0x1080

lo       Link encap:Local Loopback
      inet addr:127.0.0.1  Mask:255.0.0.0
      inet6 addr: ::1/128 Scope:Host
      UP LOOPBACK RUNNING  MTU:16436  Metric:1
      RX packets:81 errors:0 dropped:0 overruns:0 frame:0
      TX packets:81 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:0
      RX bytes:5201 (5.0 Kb)  TX bytes:5201 (5.0 Kb)

[ 本帖最后由 qsxing 于 2006-8-23 21:49 编辑 ]