免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 2377 | 回复: 8
打印 上一主题 下一主题

[NetBSD] NetBSD 3.1 has been released [复制链接]

论坛徽章:
2
亥猪
日期:2014-03-19 16:36:35午马
日期:2014-11-23 23:48:46
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2006-11-05 16:32 |只看该作者 |倒序浏览
The complete list of changes can be found in the CHANGES-3.1 file in the top level directory of the NetBSD 3.1 release tree.

A summary list of changes is as follows:

Supported devices
brgphy(4): added support for BCM5714 and BCM5780 PHY's.
Added iteide(4): driver for ITE 8212 IDE controller.
Added SpeedStep support for the Pentium M 710, 730, 740, 750, 760 and 770 CPU's.
Added support for nForce430 ATA133 and SATA controllers.
pdcsata(4): Added support for Promise PDC2057x, PDC20771, PDC20775, PDC40518 and PDC40718 SATA Controllers.
ums(4): Added support for Apple's "Mighty Mouse", and USB mice with more than 7 buttons
agp(4): Added support for Intel i915 chipset integrated graphics.
pchb(4): Added support for Intel i925X, i945G/P and i955X hardware RNG's.
Added ciss(4): driver for the Command Interface SCSI-3 Support implemented by recent HP/Compaq Smart Array RAID controllers.
Added nfe(4): driver for NVIDIA nForce MCP Ethernet.
Added svwsata(4): driver for Serverworks K2, Frodo4, Frodo8 and HT-1000 SATA controllers.
sk(4): added support for the DLink DGE-530T and DGE-560T Gigabit Ethernet adapters.
bge(4): added support for BCM5714, BCM5715, BCM5780/HT-2000 and BCM5752 chip variants.
wi(4): added support for Siemens SS1021 WLAN.
Added twa(4): driver for the 3ware Apache RAID controllers.
viaide(4): added support for nForce3 250 SATA controllers.
hptide(4): added support for HPT368 IDE controller.
Networking
Enabled SSL support in BIND.
A second dhclient(8) instance now exists gracefully instead of leaving the system in a broken state.
Removed the date from the dhclient(8) generated resolv.conf(5) file, since changes to this file are tracked by /etc/security.
Changed the default sshd_config(5) to enable SSH version 2 only.
Don't accept TCP connections to broadcast addresses.
File system
The stability of the LFS file system has been vastly improved.
Added scan_ffs(8) from OpenBSD (modified to also support FFSv2 and LFS), a utility to recover lost disklabels.
Write performance of large files to msdos filesystems has been improved.
We now drop into single-user mode when /etc/rc.d/fsck is interrupted by ^C at boot-time.
Libraries
Password aging works again.
Security
Fixed a denial of service vulnerability in sendmail when handling malformed multipart MIME messages (SA2006-017).
Fixed a buffer overflow in the in-kernel PPP code share by ISDN PPP interfaces ippp(4) and pppoe(4) (SA2006-019).
X11: fixed an integer overflow in FreeType (SA2006-020).
Fixed a potential DoS attack with sendmail(8) (SA2006-017).
Fixed a DoS vulnerability in BIND (SA2006-022).
Fixed a RSA signature forgery in openssl(1) (SA2006-023).
X11: fixed a vulnerability in Adobe Type 1 font handling (SA2006-021).
Fixed a number of DoS vulnerabilities in openssl(1) (SA in preparation, CVE entries: 2006-2937, 2940, 3738 and 4343).
Fixed a number of DoS vulnerabilities in sshd(8) (SA in preparation, CVE entries: 2006-4924 and 5051).
Miscellaneous
Various RAIDframe bugfixes.
Updated Postfix to 2.2.11.
Updated BIND to 9.3.2.
Added ex(1) to /rescue.
Fixed some special case expansions in sh(1).
Fixed cross-building from hosts using GCC 4.x.
Many, many more additions, improvements and bug fixes.
alpha specific
Support booting from FFSv2 filesystems.
amd64 specific
Make sure that the system reboots after a panic instead of halting.
mac68k specific
sysinst now newfs'es and mounts the target filesystem(s).
sparc specific
Disabled threading in named(8) on sparc and sparc64 to avoid a crash.
xen specific
Added Xen-3 domU support.
Renamed XEN kernel config files to be more consistent: XEN2_DOM0, XEN2_DOMU, XEN3_DOMU, INSTALL_XEN2_DOMU and INSTALL_XEN3_DOMU.

[ 本帖最后由 llzqq 于 2006-11-6 09:26 编辑 ]

论坛徽章:
1
荣誉版主
日期:2011-11-23 16:44:17
2 [报告]
发表于 2006-11-05 16:33 |只看该作者
沙发

论坛徽章:
2
亥猪
日期:2014-03-19 16:36:35午马
日期:2014-11-23 23:48:46
3 [报告]
发表于 2006-11-05 16:40 |只看该作者
哈哈,我昨日晚上第一时间就拖下来收藏。。。。同时期待传说中的4.0

论坛徽章:
0
4 [报告]
发表于 2006-11-05 17:58 |只看该作者
呵呵,man pages 更新为 4.0 的了,不过我也刚刚发现 3.1 的目录

论坛徽章:
1
寅虎
日期:2013-09-29 23:15:15
5 [报告]
发表于 2006-11-05 21:23 |只看该作者
原帖由 gvim 于 2006-11-5 16:40 发表
哈哈,我昨日晚上第一时间就拖下来收藏。。。。同时期待传说中的4.0

4.0什么时候出来?倒想试试.

论坛徽章:
0
6 [报告]
发表于 2006-11-05 21:33 |只看该作者
呼,俺还是比 gvim 先一步知道发布的消息,嘿嘿,一早就在 BSDLIFE 上帖了。

已经下载了 NB 3.1,打算在未来的 T60 中安装。哈哈

同时期待 packages-2006Q3 for NB3.1(I386)

论坛徽章:
0
7 [报告]
发表于 2006-11-07 10:58 |只看该作者
原帖由 MichaelBibby 于 2006-11-5 21:33 发表
呼,俺还是比 gvim 先一步知道发布的消息,嘿嘿,一早就在 BSDLIFE 上帖了。

已经下载了 NB 3.1,打算在未来的 T60 中安装。哈哈

同时期待 packages-2006Q3 for NB3.1(I386)



packages-2006Q3 for NB3.0 可以用在3.1上的呀。我用得好好的。

论坛徽章:
0
8 [报告]
发表于 2006-11-07 11:22 |只看该作者
原帖由 jazzly 于 2006-11-7 10:58 发表



packages-2006Q3 for NB3.0 可以用在3.1上的呀。我用得好好的。

这个俺知道滴,以前还把 for 2.X 的用在 NB3.0 上呢

论坛徽章:
0
9 [报告]
发表于 2006-11-07 21:25 |只看该作者
原帖由 MichaelBibby 于 2006-11-7 11:22 发表

这个俺知道滴,以前还把 for 2.X 的用在 NB3.0 上呢


听说 4.3BSD 的 binary 都可以直接运行?
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP