6509 （ws-sup32-ge-3b）catos 转换成ios 问题

laixi

ios version
IOS (tm) s3223_rp Software (s3223_rp-IPBASEK9-M), Version 12.2(1SXF5, RELEASE SOFTWARE (fc3)
version 12.2 {18}
不懂为什么这里变成了笑脸

过程：
一台6509（ws-sup32-ge-3b)其中一块引擎坏了，返修回来后带的catos的，转换后发现
没有ip routing命令，但是路由功能是起的，ospf跑得很正常，但是另外一台是有的（硬件一样，软件也一样）


SZHRT05BNK#show mod
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 48 48 port 10/100/1000mb EtherModule WS-X6148-GE-TX *
2 48 48-port 10/100 mb RJ45 WS-X6148-RJ-45 *
3 48 48-port 10/100 mb RJ45 WS-X6148-RJ-45 *
5 9 Supervisor Engine 32 8GE (Active) WS-SUP32-GE-3B *
6 9 Supervisor Engine 32 8GE (Hot) WS-SUP32-GE-3B*

Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0015.6281.de70 to 0015.6281.de9f 1.1 7.2(1) 8.5(0.46)RFW Ok
2 0013.c3aa.55b0 to 0013.c3aa.55df 5.0 8.3(1) 8.5(0.46)RFW Ok
3 0017.5944.e438 to 0017.5944.e467 5.1 8.3(1) 8.5(0.46)RFW Ok
5 0016.465e.7ff8 to 0016.465e.8003 4.3 12.2(18r)SX2 12.2(1SXF5 Ok
6 0018.198c.a4a8 to 0018.198c.a4b3 4.4 12.2(18r)SX2 12.2(1SXF5 Ok

Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
5 Policy Feature Card 3 WS-F6K-PFC3B SAL1015JJBE 2.3 Ok
5 Cat6k MSFC 2A daughterboard WS-F6K-MSFC2A SAL1020N88H 3.1 Ok
6 Policy Feature Card 3 WS-F6K-PFC3B SAD10270571 2.2 Ok
6 Cat6k MSFC 2A daughterboard WS-F6K-MSFC2A SAD102709CW 3.0 Ok

Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
3 Pass
5 Pass
6 Pass

sub-Module的版本不一样会不会有问题？？


那位高手有遇到这种情况，请帮帮忙，谢谢

[ 本帖最后由 laixi 于 2006-11-8 00:35 编辑 ]