有没有SUN的客服在这里的？请教点问题

weiweiNJ

重新拔插SCC试一下

zsw

Log entries since DEC 02 03:26:43
----------------------------------
DEC 02 03:26:43 SERVER2: 00070001: "seeprom at 0xa8 is not programmed correctly.
Bad header"
DEC 02 03:26:43 SERVER2: 00070001: "Failed to read ES segment from FRU seeprom"
DEC 02 03:26:57 SERVER2: 00060003: "SC System booted."
DEC 02 03:26:57 SERVER2: 00040073: "Access to EXPANDER @ SCSIBP.IOEXP42 has fail
ed."
DEC 02 03:26:57 SERVER2: 00040073: "Access to SENSOR @ SCSIBP.TEMP_SENSOR has fa
iled."
DEC 02 03:26:57 SERVER2: 00040073: "Access to TEMP_SENSOR @ SCSIBP.T_AMB has fai
led."
DEC 02 03:27:12 SERVER2: 00040073: "Access to EXPANDER @ SCSIBP.IOEXP46 has fail
ed."
DEC 02 03:27:12 SERVER2: 0004004f: "Indicator HDD0.SERVICE is now ON"
DEC 02 03:27:12 SERVER2: 0004004f: "Indicator HDD1.SERVICE is now ON"
DEC 02 03:27:12 SERVER2: 0004004f: "Indicator HDD2.SERVICE is now ON"
DEC 02 03:27:12 SERVER2: 0004004f: "Indicator HDD3.SERVICE is now ON"
DEC 02 03:27:19 SERVER2: 00060000: "SC Login: User admin Logged on."
sc> setlocator
Error: Invalid command option
Usage: setlocator [on|off]
sc> setlocator on
Invalid command.  Type 'help' for list of commands.
sc> setlocator on
sc> poweron

SC Alert: Host System has Reset
sc>
SC Alert: SC Request to Power Off Host Immediately.

SC Alert: Host system has shut down.

SC Alert: SCC has been removed.

SC Alert: System poweron is disabled.

SC Alert: SCC has been inserted.

SC Alert: SCC has been removed.

SC Alert: System poweron is disabled.

SC Alert: SCC has been inserted.

SC Alert: SCC has been removed.

SC Alert: System poweron is disabled.

SC Alert: SCC has been inserted.

sc> help
Available commands
------------------
poweron {FRU}
poweroff [-y] [-f]
removefru [-y] {FRU}
reset [-y] [-x]
break [-y]
bootmode [normal|reset_nvram|diag|skip_diag|bootscript="string"]
console [-f]
consolehistory [-b lines|-e lines] [-g lines] [-v] [boot|run]
showlogs [-b lines|-e lines] [-g lines] [-v]
setlocator [on|off]
showlocator
showenvironment
showfru
showplatform [-v]
showsc [-v] [param]
shownetwork [-v]
setsc [param] [value]
setupsc
showdate
setdate [[mmdd]HHMM | mmddHHMM[cc]yy][.SS]
resetsc [-y]
flashupdate [-s IPaddr -f pathname] [-v]
setdefaults [-y] [-a]
useradd <username>
userdel [-y] <username>
usershow [username]
userpassword <username>
userperm <username> [c][u][a][r]
password
showusers [-g lines]
logout
help [command]
sc> setlocator off
sc> poweron

SC Alert: Host System has Reset
sc>
SC Alert: SC Request to Power Off Host Immediately.

SC Alert: Host system has shut down.

sc> resetsc
Are you sure you want to reset the SC [y/n]?  y
User Requested SC Shutdown

ALOM BOOTMON v1.4.0
ALOM Build Release: 006
Reset register: e8000000 EHRS ESRS LLRS CSRS


ALOM POST 1.0


Dual Port Memory Test, PASSED.

TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.

TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.

TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.

Memory Data Lines Test
Memory Data Lines Test, PASSED.

Memory Address Lines Test
  Slide address bits to test open address lines
  Test for shorted address lines
Memory Address Lines Test, PASSED.

Memory Parity Test
Memory Parity Test, PASSED.

Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.



Return to Boot Monitor for Handshake
ALOM POST 1.0
   Status = 00007fff

Returned from Boot Monitor and Handshake



Clearing Memory Cells
Memory Clean Complete


Loading the runtime image...
SC Alert: SC System booted.

SC Alert: Access to EXPANDER @ SCSIBP.IOEXP42 has failed.

SC Alert: Access to SENSOR @ SCSIBP.TEMP_SENSOR has failed.

SC Alert: Access to TEMP_SENSOR @ SCSIBP.T_AMB has failed.


Sun(tm) Advanced Lights Out Manager 1.4 (SERVER2)



Full VxDiag Tests

BASIC TOD TEST
  Read the TOD Clock:        SAT DEC 02 03:45:05 2006
  Wait, 1 - 3 seconds
  Read the TOD Clock:        SAT DEC 02 03:45:07 2006
BASIC TOD TEST, PASSED

ETHERNET CPU LOOPBACK TEST
  50 BYTE PACKET   - a 0 in field of 1's.  Attaching network interface cpm0... d
one.

  50 BYTE PACKET   - a 1 in field of 0's.
  900 BYTE PACKET  - pseudo-random data.
ETHERNET CPU LOOPBACK TEST, PASSED

Full VxDiag Tests - PASSED



    Status summary  -  Status = 7FFF

       VxDiag    -          -  PASSED
       POST      -          -  PASSED
       LOOPBACK  -          -  PASSED

       I2C       -          -  PASSED
       EPROM     -          -  PASSED
       FRU PROM  -          -  PASSED

       ETHERNET  -          -  PASSED
       MAIN CRC  -          -  PASSED
       BOOT CRC  -          -  PASSED

       TTYD      -          -  PASSED
       TTYC      -          -  PASSED
       MEMORY    -          -  PASSED
       MPC850    -          -  PASSED


Please login:
SC Alert: Access to EXPANDER @ SCSIBP.IOEXP46 has failed.


Serial line login timeout, returns to console stream.

Enter #. to return to ALOM.


Copyright 2004 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.


Sun(tm) Advanced Lights Out Manager 1.4 (SERVER2)

Please login: admin
Please Enter password: ****


sc> lom -c
Invalid command.  Type 'help' for list of commands.
sc> lom -l
Invalid command.  Type 'help' for list of commands.
sc>
sc>
sc> help
Available commands
------------------
poweron {FRU}
poweroff [-y] [-f]
removefru [-y] {FRU}
reset [-y] [-x]
break [-y]
bootmode [normal|reset_nvram|diag|skip_diag|bootscript="string"]
console [-f]
consolehistory [-b lines|-e lines] [-g lines] [-v] [boot|run]
showlogs [-b lines|-e lines] [-g lines] [-v]
setlocator [on|off]
showlocator
showenvironment
showfru
showplatform [-v]
showsc [-v] [param]
shownetwork [-v]
setsc [param] [value]
setupsc
showdate
setdate [[mmdd]HHMM | mmddHHMM[cc]yy][.SS]
resetsc [-y]
flashupdate [-s IPaddr -f pathname] [-v]
setdefaults [-y] [-a]
useradd <username>
userdel [-y] <username>
usershow [username]
userpassword <username>
userperm <username> [c][u][a][r]
password
showusers [-g lines]
logout
help [command]
sc> consolehistory
sc> console
Invalid command.  Type 'help' for list of commands.
sc> console
Enter #. to return to ALOM.
sc>
sc> console
Enter #. to return to ALOM.
sc>
sc>

sc> help
Available commands
------------------
poweron {FRU}
poweroff [-y] [-f]
removefru [-y] {FRU}
reset [-y] [-x]
break [-y]
bootmode [normal|reset_nvram|diag|skip_diag|bootscript="string"]
console [-f]
consolehistory [-b lines|-e lines] [-g lines] [-v] [boot|run]
showlogs [-b lines|-e lines] [-g lines] [-v]
setlocator [on|off]
showlocator
showenvironment
showfru
showplatform [-v]
showsc [-v] [param]
shownetwork [-v]
setsc [param] [value]
setupsc
showdate
setdate [[mmdd]HHMM | mmddHHMM[cc]yy][.SS]
resetsc [-y]
flashupdate [-s IPaddr -f pathname] [-v]
setdefaults [-y] [-a]
useradd <username>
userdel [-y] <username>
usershow [username]
userpassword <username>
userperm <username> [c][u][a][r]
password
showusers [-g lines]
logout
help [command]
sc> showlogs

Log entries since DEC 02 03:44:50
----------------------------------
DEC 02 03:44:50 SERVER2: 00070001: "seeprom at 0xa8 is not programmed correctly.
Bad header"
DEC 02 03:44:50 SERVER2: 00070001: "Failed to read ES segment from FRU seeprom"
DEC 02 03:45:04 SERVER2: 00060003: "SC System booted."
DEC 02 03:45:04 SERVER2: 00040073: "Access to EXPANDER @ SCSIBP.IOEXP42 has fail
ed."
DEC 02 03:45:04 SERVER2: 00040073: "Access to SENSOR @ SCSIBP.TEMP_SENSOR has fa
iled."
DEC 02 03:45:04 SERVER2: 00040073: "Access to TEMP_SENSOR @ SCSIBP.T_AMB has fai
led."
DEC 02 03:45:19 SERVER2: 00040073: "Access to EXPANDER @ SCSIBP.IOEXP46 has fail
ed."
DEC 02 03:45:19 SERVER2: 0004004f: "Indicator HDD0.SERVICE is now ON"
DEC 02 03:45:19 SERVER2: 0004004f: "Indicator HDD1.SERVICE is now ON"
DEC 02 03:45:19 SERVER2: 0004004f: "Indicator HDD2.SERVICE is now ON"
DEC 02 03:45:19 SERVER2: 0004004f: "Indicator HDD3.SERVICE is now ON"
DEC 02 03:46:34 SERVER2: 00060000: "SC Login: User admin Logged on."
sc> showlocator
Locator led is OFF
sc> showenvironment


=============== Environmental Status ===============


--------------------------------------------------------------------------------

System Temperatures (Temperatures in Celsius):
--------------------------------------------------------------------------------

Sensor         Status    Temp LowHard LowSoft LowWarn HighWarn HighSoft HighHard

--------------------------------------------------------------------------------

CPU temperature information cannot be displayed when System power is off.
SCSIBP.T_AMB    UNKNOWN    --     --      --      --      --       --       --
MB.T_AMB        OK         18    -18     -10       0      65       75       85

DisplayENXS_FSP: error read front panel

Disk Status information cannot be displayed when System power is off.

Fan Status information cannot be displayed when System power is off.

Voltage Rail Status information cannot be displayed when System power is off.

-------------------------------------------------
Power Supply Indicators:
-------------------------------------------------
Supply    POK      STBY   Service   OK-to-Remove
-------------------------------------------------
PS0       OFF      ON     OFF       OFF
PS1       OFF      ON     OFF       OFF

---------------------
Power Supplies:
---------------------
Supply  Status
---------------------
PS0     OK
PS1     OK


Current sensor information cannot be displayed when System power is off.
sc> poweron

SC Alert: Host System has Reset
sc>
sc> showenvironment


=============== Environmental Status ===============


--------------------------------------------------------------------------------

System Temperatures (Temperatures in Celsius):
--------------------------------------------------------------------------------

Sensor         Status    Temp LowHard LowSoft LowWarn HighWarn HighSoft HighHard

--------------------------------------------------------------------------------

C0.P0.T_CORE    OK         22    -20     -10       0      97      102      120
C1.P0.T_CORE    OK         22    -20     -10       0      97      102      120
C0.T_AMB        OK         22    -20     -10       0      60       65       75
C1.T_AMB        OK         22    -20     -10       0      60       65       75
SCSIBP.T_AMB    UNKNOWN    --     --      --      --      --       --       --
MB.T_AMB        OK         17    -18     -10       0      65       75       85

DisplayENXS_FSP: error read front panel
--------------------------------------------
System Disks:
--------------------------------------------
Disk   Status            Service  OK2RM
--------------------------------------------
HDD0   UNKNOWN             --        --
HDD1   UNKNOWN             --        --
HDD2   UNKNOWN             --        --
HDD3   UNKNOWN             --        --

----------------------------------------------------------
Fans (Speeds Revolution Per Minute):
----------------------------------------------------------
Sensor           Status           Speed   Warn    Low
----------------------------------------------------------
FT0.F0.TACH      UNAVAILABLE         --   2400    750
FT1.F0.TACH      UNAVAILABLE         --   2400    750
FT1.F1.TACH      UNAVAILABLE         --   2400    750

--------------------------------------------------------------------------------

Voltage sensors (in Volts):
--------------------------------------------------------------------------------

Sensor         Status       Voltage LowSoft LowWarn HighWarn HighSoft
--------------------------------------------------------------------------------

MB.V_+1V5      OK             1.48    1.20    1.27    1.72     1.80
MB.V_VCCTM     OK             2.53    2.00    2.12    2.87     3.00
MB.V_NET0_1V2D OK             1.26    0.96    1.02    1.38     1.44
MB.V_NET1_1V2D OK             1.26    0.96    1.02    1.38     1.44
MB.V_NET0_1V2A OK             1.26    0.96    1.02    1.38     1.44
MB.V_NET1_1V2A OK             1.25    0.96    1.02    1.38     1.44
MB.V_+3V3      OK             3.39    2.64    2.80    3.79     3.96
MB.V_+3V3STBY  OK             3.31    2.64    2.80    3.79     3.96
MB.BAT.V_BAT   OK             2.93      --    2.25      --       --
MB.V_SCSI_CORE OK             1.79    1.44    1.53    2.07     2.16
MB.V_+5V       OK             5.07    4.00    4.25    5.75     6.00
MB.V_+12V      OK            12.00    9.60   10.20   13.80    14.40
MB.V_-12V      OK           -11.96  -14.40  -13.80  -10.20    -9.60

-------------------------------------------------
Power Supply Indicators:
-------------------------------------------------
Supply    POK      STBY   Service   OK-to-Remove
-------------------------------------------------
PS0       ON       ON     OFF       OFF
PS1       ON       ON     OFF       OFF

---------------------
Power Supplies:
---------------------
Supply  Status
---------------------
PS0     OK
PS1     OK

----------------------
Current sensors:
----------------------
Sensor          Status
----------------------
MB.FF_SCSIA      OK
MB.FF_SCSIB      OK
MB.FF_POK        OK
C0.P0.FF_POK     OK
C1.P0.FF_POK     OK

sc> showplatform
SUNW,Sun-Fire-v440

Domain  Status
------  ------
SERVER2 OS Reset
sc>
SC Alert: SC Request to Power Off Host Immediately.

SC Alert: Host system has shut down.
showsc
Advanced Lights Out Manager v1.4

parameter                value
---------                -----
if_network               false
if_modem                 false
if_emailalerts           false
sys_autorestart          xir
sys_xirtimeout           900
netsc_tpelinktest        true
netsc_dhcp               false
netsc_ipaddr             0.0.0.0
netsc_ipnetmask          255.255.255.0
netsc_ipgateway          0.0.0.0
mgt_mailhost
mgt_mailalert
sc_customerinfo
sc_escapechars           #.
sc_powerondelay          false
sc_powerstatememory      false
sc_clipasswdecho         true
sc_cliprompt             sc
sc_clitimeout            0
sc_clieventlevel         2
sc_backupuserdata        true
sys_eventlevel           2
ser_baudrate             9600
ser_parity               none
ser_stopbits             1
ser_data                 8
netsc_enetaddr           00:03:ba:a4:bc:a8
sys_hostname             SERVER2
sys_enetaddr             00:03:ba:a4:bc:9f
sc> shownetwork
SC network configuration is:
Ethernet is disabled.
sc> showdate
SAT DEC 02 04:02:06 UTC 2006
sc> showusers
username         connection       login time       client IP addr   console
--------         ----------       ----------       --------------   -------
admin            serial           DEC 02 03:46
sc>

zsw

上面的是我进到SC系统抄的东西，
希望给愿意帮我的兄弟做个参考