如何mount 软盘创建UNIX格式的软盘文件。

月冷西湖

我的a.tar文件要解压到UNIX软盘上，如何做呢？

xianren

先tar 到硬盘，再tar 到软盘。
mkdir abc
cd abc
拷贝a.tar 到当前目录。
tar tvf a.tar
(查看是否绝对路径，是绝对路径比较麻烦，不能继续）
tar xvf a.tar
rm a.tar
tar cv6 ./*

月冷西湖

Tar File Drivers for SCO Unix 3.2 v4.2, Openserver 5.0x and Unixware 2.0x and 2.1x

Filename: 7800_fms303_disk3.tar
Date: 23 Feb 2000
Size: 1,290,240 bytes
      

Description:
7800 Family Manager Set v3.03, disk 3 of 3. Contains drivers for SCO Unix 3.2 v4.2, SCO OpenServer 5.0x and SCO Unixware 2.0x and 2.1x. This file is in tar format.

Installation Instruction:
Use the command "tar -xvf" to extract the contents to a unix formatted floppy disk

我不知道如何做了？

老农a

tar xvf /dev/fd0135ds18;
tar xvf /dev/fd0;
tar xv6;
都可以。

月冷西湖

tar : directory checksum error.
为什么呢？

月冷西湖

http://www.adaptec.com/cgi-bin/license-download.pl
谁帮助我做个HD的IMG。
谢了。

simonzhan

估计是你的盘坏了。

foolboy007

拿了张坏盘  或者说没格式化的盘在这里问

先把盘格了 format a:
然后 tar cv6

月冷西湖

就是如此做，还是不能用。
谁帮忙做个IMG的文件。
http://www.adaptec.com/cgi-bin/license-download.pl
谁帮助我做个HD的IMG。

发到：  suning@xc-public.xc.cninfo.net

老农a

干脆看另一个嘛：
Drivers for SCO Unix 3.2 v4.2, Openserver 5.0x and Unixware 2.0x and 2.1x. self-extracting version

Filename: 7800_fms303_sco_drv2.exe
Date: 26 Jun 2000
Size: 665,854 bytes
Language: English
Estimated Download Time:
Modem (56k) - 0 minutes, 11 seconds
DSL (256k) - less than 5 seconds
T1 (1.4Mb) - less than 5 seconds
         

Description:
This is a self-extracting DOS archive file, and contains drivers for SCO Unix3.2 v4.2, SCO OpenServer 5.0x and SCO Unixware 2.0x and 2.1x.

Installation Instruction:
Run the .EXE file to expand the file into a TEMP directory. Then place a blank, formatted diskette (3.5", 1.44 MB) into drive A:.

Run "create.bat", which takes the Unix image (.IMG) file and copies it to the floppy and creates a Unix driver diskette. This "create.bat" utility will create the 7800 family manager set 3.03 disk 3. You will need a blank, formatted diskette. Label the disk 3 of 3.

Notes:
This disk contain the SCO drivers and will be in Unix format (sysv or s5). You will be unable to read them on a DOS machine.