免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 968 | 回复: 1
打印 上一主题 下一主题

cluster3.0每隔10多分钟重启一回,请高手分析一下原因 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2006-12-13 16:20 |只看该作者 |倒序浏览
这是两次重启之间的信息:
Nov  5 03:40:07 smcp1 Cluster.PNM: [ID 760284 daemon.error] PNM system error: SIOCLIFREMOVEIF of ce2:0: Address family not supported by protocol family
Nov  5 03:40:07 smcp1 SC[SUNW.LogicalHostname,smp_rg,smcp1,hafoip_stop]: [ID 628998 local7.error] NAFO logical interface configuration operation failed with <-1>.
Nov  5 03:40:07 smcp1 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource smcp1 status on node smcp1 change to R_FM_FAULTED
Nov  5 03:40:07 smcp1 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource smcp1 status msg on node smcp1 change to <Could not unplumb any ipaddresses.>
Nov  5 03:40:07 smcp1 Cluster.RGM.rgmd: [ID 661614 daemon.error] Method <hafoip_stop> failed on resource <smcp1> in resource group <smp_rg>, exit code <1>
Nov  5 03:40:07 smcp1 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource smpwork status on node smcp1 change to R_FM_OFFLINE
Nov  5 03:40:07 smcp1 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource smpwork status msg on node smcp1 change to <LogicalHostname offline.>
Nov  5 03:40:07 smcp1 Cluster.RGM.rgmd: [ID 148023 daemon.notice] method <hafoip_stop> completed successfully for resource <smpwork>, resource group <smp_rg>
Nov  5 03:40:07 smcp1 Cluster.RGM.rgmd: [ID 908716 daemon.error] fatal: Aborting this node because method <hafoip_stop> failed on resource <smcp1> and Failover_mode is set to HARD
Nov  5 03:50:49 smcp1 genunix: [ID 540533 kern.notice] ^MSunOS Release 5.8 Version Generic_117350-38 64-bit
Nov  5 03:50:49 smcp1 genunix: [ID 913632 kern.notice] Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
Nov  5 03:50:49 smcp1 genunix: [ID 678236 kern.info] Ethernet address = 0:3:ba:dd:86:57
Nov  5 03:50:49 smcp1 unix: [ID 389951 kern.info] mem = 4194304K (0x100000000)
Nov  5 03:50:49 smcp1 unix: [ID 930857 kern.info] avail mem = 4110327808
Nov  5 03:50:49 smcp1 rootnex: [ID 466748 kern.info] root nexus = Sun Fire V440
Nov  5 03:50:49 smcp1 rootnex: [ID 349649 kern.info] pcisch0 at root: SAFARI 0x1c 0x600000
Nov  5 03:50:49 smcp1 genunix: [ID 936769 kern.info] pcisch0 is /pci@1c,600000
Nov  5 03:50:49 smcp1 rootnex: [ID 349649 kern.info] pcisch1 at root: SAFARI 0x1d 0x700000
Nov  5 03:50:49 smcp1 genunix: [ID 936769 kern.info] pcisch1 is /pci@1d,700000
Nov  5 03:50:49 smcp1 rootnex: [ID 349649 kern.info] pcisch2 at root: SAFARI 0x1e 0x600000
Nov  5 03:50:49 smcp1 genunix: [ID 936769 kern.info] pcisch2 is /pci@1e,600000
Nov  5 03:50:49 smcp1 rootnex: [ID 349649 kern.info] pcisch3 at root: SAFARI 0x1f 0x700000
Nov  5 03:50:49 smcp1 genunix: [ID 936769 kern.info] pcisch3 is /pci@1f,700000
Nov  5 03:50:49 smcp1 scsi: [ID 365881 kern.info] /pci@1c,600000/scsi@1 (mpt0):
Nov  5 03:50:49 smcp1         initiator SCSI ID now 6
Nov  5 03:50:49 smcp1 scsi: [ID 365881 kern.info] /pci@1c,600000/scsi@1 (mpt0):
Nov  5 03:50:49 smcp1         Rev. 8 LSI, Inc. 1030 found.
Nov  5 03:50:49 smcp1 scsi: [ID 365881 kern.info] /pci@1c,600000/scsi@1 (mpt0):
Nov  5 03:50:49 smcp1         mpt0 supports power management.
Nov  5 03:50:49 smcp1 scsi: [ID 365881 kern.info] /pci@1c,600000/scsi@1 (mpt0):
Nov  5 03:50:49 smcp1         mpt0 Firmware version v1.3.27.0
Nov  5 03:50:49 smcp1 scsi: [ID 365881 kern.info] /pci@1c,600000/scsi@1 (mpt0):
Nov  5 03:50:49 smcp1         mpt0: IOC Operational.
Nov  5 03:50:50 smcp1 pcisch: [ID 370704 kern.info] PCI-device: scsi@1, mpt0
Nov  5 03:50:50 smcp1 genunix: [ID 936769 kern.info] mpt0 is /pci@1c,600000/scsi@1
Nov  5 03:50:50 smcp1 scsi: [ID 365881 kern.info] /pci@1c,600000/scsi@1,1 (mpt1):
Nov  5 03:50:50 smcp1         initiator SCSI ID now 6
Nov  5 03:50:50 smcp1 scsi: [ID 365881 kern.info] /pci@1c,600000/scsi@1,1 (mpt1):
Nov  5 03:50:50 smcp1         Rev. 8 LSI, Inc. 1030 found.
Nov  5 03:50:50 smcp1 scsi: [ID 365881 kern.info] /pci@1c,600000/scsi@1,1 (mpt1):
Nov  5 03:50:50 smcp1         mpt1 supports power management.
Nov  5 03:50:50 smcp1 scsi: [ID 365881 kern.info] /pci@1c,600000/scsi@1,1 (mpt1):
Nov  5 03:50:50 smcp1         mpt1 Firmware version v1.3.27.0
Nov  5 03:50:50 smcp1 scsi: [ID 365881 kern.info] /pci@1c,600000/scsi@1,1 (mpt1):
Nov  5 03:50:50 smcp1         mpt1: IOC Operational.
Nov  5 03:50:52 smcp1 pcisch: [ID 370704 kern.info] PCI-device: scsi@1,1, mpt1
Nov  5 03:50:52 smcp1 genunix: [ID 936769 kern.info] mpt1 is /pci@1c,600000/scsi@1,1
Nov  5 03:50:52 smcp1 scsi: [ID 365881 kern.info] /pci@1d,700000/scsi@1 (mpt2):
Nov  5 03:50:52 smcp1         initiator SCSI ID now 6
Nov  5 03:50:52 smcp1 scsi: [ID 365881 kern.info] /pci@1d,700000/scsi@1 (mpt2):
Nov  5 03:50:52 smcp1         Rev. 8 LSI, Inc. 1030 found.
Nov  5 03:50:52 smcp1 scsi: [ID 365881 kern.info] /pci@1d,700000/scsi@1 (mpt2):
Nov  5 03:50:52 smcp1         mpt2 supports power management.
Nov  5 03:50:52 smcp1 scsi: [ID 365881 kern.info] /pci@1d,700000/scsi@1 (mpt2):
Nov  5 03:50:52 smcp1         mpt2 Firmware version v1.3.27.0
Nov  5 03:50:52 smcp1 scsi: [ID 365881 kern.info] /pci@1d,700000/scsi@1 (mpt2):
Nov  5 03:50:52 smcp1         mpt2: IOC Operational.
Nov  5 03:50:54 smcp1 pcisch: [ID 370704 kern.info] PCI-device: scsi@1, mpt2
Nov  5 03:50:54 smcp1 genunix: [ID 936769 kern.info] mpt2 is /pci@1d,700000/scsi@1
Nov  5 03:50:54 smcp1 scsi: [ID 365881 kern.info] /pci@1d,700000/scsi@1,1 (mpt3):
Nov  5 03:50:54 smcp1         initiator SCSI ID now 6
Nov  5 03:50:54 smcp1 scsi: [ID 365881 kern.info] /pci@1d,700000/scsi@1,1 (mpt3):
Nov  5 03:50:54 smcp1         Rev. 8 LSI, Inc. 1030 found.
Nov  5 03:50:54 smcp1 scsi: [ID 365881 kern.info] /pci@1d,700000/scsi@1,1 (mpt3):
Nov  5 03:50:54 smcp1         mpt3 supports power management.
Nov  5 03:50:54 smcp1 scsi: [ID 365881 kern.info] /pci@1d,700000/scsi@1,1 (mpt3):
Nov  5 03:50:54 smcp1         mpt3 Firmware version v1.3.27.0
Nov  5 03:50:54 smcp1 scsi: [ID 365881 kern.info] /pci@1d,700000/scsi@1,1 (mpt3):
Nov  5 03:50:54 smcp1         mpt3: IOC Operational.
Nov  5 03:50:56 smcp1 pcisch: [ID 370704 kern.info] PCI-device: scsi@1,1, mpt3
Nov  5 03:50:56 smcp1 genunix: [ID 936769 kern.info] mpt3 is /pci@1d,700000/scsi@1,1
Nov  5 03:50:56 smcp1 scsi: [ID 365881 kern.info] /pci@1f,700000/scsi@2 (mpt4):
Nov  5 03:50:56 smcp1         initiator SCSI ID now 6
Nov  5 03:50:56 smcp1 scsi: [ID 365881 kern.info] /pci@1f,700000/scsi@2 (mpt4):
Nov  5 03:50:56 smcp1         Rev. 7 LSI, Inc. 1030 found.
Nov  5 03:50:56 smcp1 scsi: [ID 365881 kern.info] /pci@1f,700000/scsi@2 (mpt4):
Nov  5 03:50:56 smcp1         mpt4 supports power management.
Nov  5 03:51:05 smcp1 scsi: [ID

论坛徽章:
2
双鱼座
日期:2014-02-23 12:10:03操作系统版块每日发帖之星
日期:2015-12-17 06:20:00
2 [报告]
发表于 2006-12-13 16:28 |只看该作者
有是HW的smcp双机,找HW的800双机组开case处理吧,呵呵,重启的原因可就多了,单从你提供的这些信息怎么判断!建议收集explorer,让HW的800去分析吧!
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP