谁有RedHat 9装Realtek RTL 8168/8111 PCI-E网卡的经验？

flylonginsky

装了redhat9.0,但是却无法使用网卡.
去realtek下载驱动,根据提示make modules时发生错误.
不知道有谁装过?
谢谢了,急.

sisi8408

把你的网卡借俺用一周，俺就会给你装啦，还有主板，呵呵。

[ 本帖最后由 sisi8408 于 2007-1-4 14:09 编辑 ]

bbboy

不是很难把，我装过华硕的，就是默认安装的

坚持向左

去下这个驱动：8111_v1.04.tgz
<Requirements>

  - kernel source tree (supported versions 2.4.x or 2.6.x)
  - compiler/binutils for kernel compilation



<Quick install with proper kernel settings>

  Unpack the tarball :
        tar vzxf r1000_vX.YZ.tgz

  Change to the directory:
        cd r1000_vX.YZ

  If you are running the target kernel, then you should be
  able to do :

        make clean modules        (as root or with sudo)
        make install
        depmod -a

flylonginsky

原帖由 坚持向左 于 2007-1-4 15:12 发表
去下这个驱动：8111_v1.04.tgz
<Requirements>

  - kernel source tree (supported versions 2.4.x or 2.6.x)
  - compiler/binutils for kernel compilation



<Quick install with proper k ...

我只找到1.05的版本.
但是编译通不过...
痛苦....

flylonginsky

原帖由 sisi8408 于 2007-1-4 14:06 发表
把你的网卡借俺用一周，俺就会给你装啦，还有主板，呵呵。

好呀.你过来拿啊.顺便把双cpu拿走.配置太新了,装驱动麻烦.

flylonginsky

我把错误信息打印出来了，大家帮我看一下.谢谢了。

make -C src/ modules
make[1]: Entering directory `/usr/src/r1000_v1.05/src'
make -f Makefile_linux24x
make[2]: Entering directory `/usr/src/r1000_v1.05/src'
gcc -DLINUX -D__KERNEL__ -DMODULE -O2 -pipe -Wall -I/lib/modules/2.4.20-8smp/build/include -I. -DMODVERSIONS -DEXPORT_SYMTAB -include /lib/modules/2.4.20-8smp/build/include/linux/modversions.h -c r1000_n.c -o r1000_n.o
In file included from /lib/modules/2.4.20-8smp/build/include/linux/prefetch.h:13,
                 from /lib/modules/2.4.20-8smp/build/include/linux/list.h:6,
                 from /lib/modules/2.4.20-8smp/build/include/linux/module.h:12,
                 from r1000.h:1,
                 from r1000_n.c:5:
/lib/modules/2.4.20-8smp/build/include/asm/processor.h:60: warning: parameter names (without types) in function declaration
/lib/modules/2.4.20-8smp/build/include/asm/processor.h:60: field `loops_per_jiffy_R_ver_str' declared as a function
/lib/modules/2.4.20-8smp/build/include/asm/processor.h:82: invalid suffix on integer constant
/lib/modules/2.4.20-8smp/build/include/asm/processor.h:82: parse error before numeric constant
/lib/modules/2.4.20-8smp/build/include/asm/processor.h:265: invalid suffix on integer constant
/lib/modules/2.4.20-8smp/build/include/asm/processor.h:265: parse error before numeric constant
/lib/modules/2.4.20-8smp/build/include/asm/processor.h:269: warning: parameter names (without types) in function declaration
In file included from r1000.h:1,
                 from r1000_n.c:5:
/lib/modules/2.4.20-8smp/build/include/linux/module.h:183: invalid suffix on integer constant
/lib/modules/2.4.20-8smp/build/include/linux/module.h:183: parse error before numeric constant
/lib/modules/2.4.20-8smp/build/include/linux/module.h:183: `inter_module_register_R_ver_str' declared as function returning a function
/lib/modules/2.4.20-8smp/build/include/linux/module.h:184: invalid suffix on integer constant
/lib/modules/2.4.20-8smp/build/include/linux/module.h:184: parse error before numeric constant
/lib/modules/2.4.20-8smp/build/include/linux/module.h:184: `inter_module_unregister_R_ver_str' declared as function returning a function
/lib/modules/2.4.20-8smp/build/include/linux/module.h:185: `inter_module_get_R_ver_str' declared as function returning a function
/lib/modules/2.4.20-8smp/build/include/linux/module.h:185: warning: parameter names (without types) in function declaration
/lib/modules/2.4.20-8smp/build/include/linux/module.h:186: `inter_module_get_request_R_ver_str' declared as function returning a function
/lib/modules/2.4.20-8smp/build/include/linux/module.h:186: warning: parameter names (without types) in function declaration
/lib/modules/2.4.20-8smp/build/include/linux/module.h:187: invalid suffix on integer constant
/lib/modules/2.4.20-8smp/build/include/linux/module.h:187: parse error before numeric constant
/lib/modules/2.4.20-8smp/build/include/linux/module.h:187: `inter_module_put_R_ver_str' declared as function returning a function
/lib/modules/2.4.20-8smp/build/include/linux/module.h:196: `try_inc_mod_count_R_ver_str' declared as function returning a function
/lib/modules/2.4.20-8smp/build/include/linux/module.h:196: warning: parameter names (without types) in function declaration
r1000_n.c:1296: parse error before "r1000_tx_action"
r1000_n.c:1296: warning: return type defaults to `int'
r1000_n.c:1296: conflicting types for `r1000_tx_action'
r1000_n.c:1295: previous declaration of `r1000_tx_action'
r1000_n.c:1345: parse error before "r1000_rx_action"
r1000_n.c:1345: warning: return type defaults to `int'
r1000_n.c:1345: conflicting types for `r1000_rx_action'
r1000_n.c:1344: previous declaration of `r1000_rx_action'
r1000_n.c: In function `r1000_interrupt':
r1000_n.c:1479: warning: `return' with a value, in function returning void
r1000_n.c:1483: warning: `return' with a value, in function returning void
make[2]: *** [r1000_n.o] Error 1
make[2]: Leaving directory `/usr/src/r1000_v1.05/src'
make[1]: *** [modules] Error 2
make[1]: Leaving directory `/usr/src/r1000_v1.05/src'
make: *** [modules] Error 2

sisi8408

原帖由 flylonginsky 于 2007-1-4 15:56 发表


好呀.你过来拿啊.顺便把双cpu拿走.配置太新了,装驱动麻烦.

这就去，怎么走？

ipaddr

用1.05的版本，很容易安装的，看安装包里的安装说明就可以了。

不过要有gcc的内核源码。

flylonginsky

原帖由 ipaddr 于 2007-1-4 18:49 发表
用1.05的版本，很容易安装的，看安装包里的安装说明就可以了。

不过要有gcc的内核源码。

我也是这样认为的.
但是事实上我也是按照说明来安装的.
但是事实上不能成功.

你要gcc源码干吗?