fb62已经崩溃2次了，linux中的vmware环境。不知什么原因。

ppxp

fb61没出过问题。fb62一次是mount /cdrom，一次是make fcitx的时候。以下是messages
Jan 17 15:41:49 fb62 syslogd: kernel boot file is /boot/kernel/kernel
Jan 17 15:41:49 fb62 kernel:
Jan 17 15:41:49 fb62 kernel:
Jan 17 15:41:49 fb62 kernel: Fatal trap 12: page fault while in kernel mode
Jan 17 15:41:49 fb62 kernel: cpuid = 0; apic id = 00
Jan 17 15:41:49 fb62 kernel: fault virtual address      = 0x0
Jan 17 15:41:49 fb62 kernel: fault code         = supervisor read, page not present
Jan 17 15:41:49 fb62 kernel: instruction pointer        = 0x20:0xc063afa3
Jan 17 15:41:49 fb62 kernel: stack pointer              = 0x28:0xda9a0acc
Jan 17 15:41:49 fb62 kernel: frame pointer              = 0x28:0xda9a0ae8
Jan 17 15:41:49 fb62 kernel: code segment               = base 0x0, limit 0xfffff, type 0x1b
Jan 17 15:41:49 fb62 kernel: = DPL 0, pres 1, def32 1, gran 1
Jan 17 15:41:49 fb62 kernel: processor eflags   = interrupt enabled, resume, IOPL = 0
Jan 17 15:41:49 fb62 kernel: current process            = 2315 (ls)
Jan 17 15:41:49 fb62 kernel: trap number                = 12
Jan 17 15:41:49 fb62 kernel: panic: page fault
Jan 17 15:41:49 fb62 kernel: cpuid = 0
Jan 17 15:41:49 fb62 kernel: Uptime: 4h19m19s
Jan 17 15:41:49 fb62 kernel: Cannot dump. No dump device defined.
Jan 17 15:41:49 fb62 kernel: Automatic reboot in 15 seconds - press a key on the console to abort
Jan 17 15:41:49 fb62 kernel: --> Press a key on the console to reboot,
Jan 17 15:41:49 fb62 kernel: --> or switch off the system now.
Jan 17 15:41:49 fb62 kernel: Rebooting...
Jan 17 15:41:49 fb62 kernel: Copyright (c) 1992-2007 The FreeBSD Project.
Jan 17 15:41:49 fb62 kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Jan 17 15:41:49 fb62 kernel: The Regents of the University of California. All rights reserved.
Jan 17 15:41:49 fb62 kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Jan 17 15:41:49 fb62 kernel: FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007
Jan 17 15:41:49 fb62 kernel: root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Jan 17 15:41:49 fb62 kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Jan 17 15:41:49 fb62 kernel: CPU: Intel(R) Pentium(R) D CPU 2.80GHz (2804.97-MHz 686-class CPU)
Jan 17 15:41:49 fb62 kernel: Origin = "GenuineIntel"  Id = 0xf48  Stepping = 8
Jan 17 15:41:49 fb62 kernel: Features=0xfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS>
Jan 17 15:41:49 fb62 kernel: Features2=0x15<SSE3,RSVD2,DS_CPL>
Jan 17 15:41:49 fb62 kernel: AMD Features=0x100000<NX>
Jan 17 15:41:49 fb62 kernel: real memory  = 536870912 (512 MB)
Jan 17 15:41:49 fb62 kernel: avail memory = 515715072 (491 MB)
Jan 17 15:41:49 fb62 kernel: ACPI APIC Table: <PTLTD     APIC  >
Jan 17 15:41:49 fb62 kernel: MADT: Forcing active-low polarity and level trigger for SCI
Jan 17 15:41:49 fb62 kernel: ioapic0 <Version 1.1> irqs 0-23 on motherboard
Jan 17 15:41:49 fb62 kernel: kbd1 at kbdmux0
Jan 17 15:41:49 fb62 kernel: ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
Jan 17 15:41:49 fb62 kernel: acpi0: <PTLTD   RSDT> on motherboard
Jan 17 15:41:49 fb62 kernel: acpi0: Power Button (fixed)
Jan 17 15:41:49 fb62 kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
Jan 17 15:41:49 fb62 kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
Jan 17 15:41:49 fb62 kernel: cpu0: <ACPI CPU> on acpi0
Jan 17 15:41:49 fb62 kernel: acpi_throttle0: <ACPI CPU Throttling> on cpu0
Jan 17 15:41:49 fb62 kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Jan 17 15:41:49 fb62 kernel: pci0: <ACPI PCI bus> on pcib0
Jan 17 15:41:49 fb62 kernel: agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0
Jan 17 15:41:49 fb62 kernel: pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
Jan 17 15:41:49 fb62 kernel: pci1: <ACPI PCI bus> on pcib1
Jan 17 15:41:49 fb62 kernel: isab0: <PCI-ISA bridge> at device 7.0 on pci0
Jan 17 15:41:49 fb62 kernel: isa0: <ISA bus> on isab0
Jan 17 15:41:49 fb62 kernel: atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1050-0x105f at device 7.1 on pci0
Jan 17 15:41:49 fb62 kernel: ata0: <ATA channel 0> on atapci0
Jan 17 15:41:49 fb62 kernel: ata1: <ATA channel 1> on atapci0
Jan 17 15:41:49 fb62 kernel: pci0: <bridge> at device 7.3 (no driver attached)
Jan 17 15:41:49 fb62 kernel: pci0: <display, VGA> at device 15.0 (no driver attached)
Jan 17 15:41:49 fb62 kernel: mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x1080-0x10ff mem 0xe8800000-0xe8800fff irq 17 at device 16.0 on pci0
Jan 17 15:41:49 fb62 kernel: mpt0: [GIANT-LOCKED]
Jan 17 15:41:49 fb62 kernel: mpt0: MPI Version=1.2.0.0
Jan 17 15:41:49 fb62 kernel: lnc0: <PCNet/PCI Ethernet adapter> port 0x1400-0x147f irq 18 at device
17.0 on pci0
Jan 17 15:41:49 fb62 kernel: lnc0: Attaching PCNet/PCI Ethernet adapter
Jan 17 15:41:49 fb62 kernel: lnc0: [GIANT-LOCKED]
Jan 17 15:41:49 fb62 kernel: lnc0: Ethernet address: 00:0c:29:92:de:aa
Jan 17 15:41:49 fb62 kernel: lnc0: if_start running deferred for Giant
Jan 17 15:41:49 fb62 kernel: lnc0: PCnet-PCI
Jan 17 15:41:49 fb62 kernel: acpi_acad0: <AC Adapter> on acpi0
Jan 17 15:41:49 fb62 kernel: atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
Jan 17 15:41:49 fb62 kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Jan 17 15:41:49 fb62 kernel: kbd0 at atkbd0
Jan 17 15:41:49 fb62 kernel: atkbd0: [GIANT-LOCKED]
Jan 17 15:41:49 fb62 kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Jan 17 15:41:49 fb62 kernel: psm0: [GIANT-LOCKED]
Jan 17 15:41:49 fb62 kernel: psm0: model IntelliMouse, device ID 3
Jan 17 15:41:49 fb62 kernel: ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
Jan 17 15:41:49 fb62 kernel: ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
Jan 17 15:41:49 fb62 kernel: ppbus0: <Parallel port bus> on ppc0
Jan 17 15:41:49 fb62 kernel: plip0: <PLIP network interface> on ppbus0
Jan 17 15:41:49 fb62 kernel: lpt0: <Printer> on ppbus0
Jan 17 15:41:49 fb62 kernel: lpt0: Interrupt-driven port
Jan 17 15:41:49 fb62 kernel: ppi0: <Parallel I/O> on ppbus0
Jan 17 15:41:49 fb62 kernel: sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
Jan 17 15:41:49 fb62 kernel: sio0: type 16550A
Jan 17 15:41:49 fb62 kernel: sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
Jan 17 15:41:49 fb62 kernel: sio1: type 16550A
Jan 17 15:41:49 fb62 kernel: fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
Jan 17 15:41:49 fb62 kernel: fdc0: [FAST]
Jan 17 15:41:49 fb62 kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Jan 17 15:41:49 fb62 kernel: pmtimer0 on isa0
Jan 17 15:41:49 fb62 kernel: orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xdc000-0xdffff,0xe0000-0xe3fff on isa0
Jan 17 15:41:49 fb62 kernel: sc0: <System console> at flags 0x100 on isa0
Jan 17 15:41:49 fb62 kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Jan 17 15:41:49 fb62 kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Jan 17 15:41:49 fb62 kernel: Timecounter "TSC" frequency 2804967262 Hz quality 800
Jan 17 15:41:49 fb62 kernel: Timecounters tick every 1.000 msec
Jan 17 15:41:49 fb62 kernel: ad0: 8192MB <VMware Virtual IDE Hard Drive 00000001> at ata0-master UDMA33
Jan 17 15:41:49 fb62 kernel: acd0: CDROM <VMware Virtual IDE CDROM Drive/00000001> at ata1-master UDMA33
Jan 17 15:41:49 fb62 kernel: Waiting 5 seconds for SCSI devices to settle
Jan 17 15:41:49 fb62 kernel: Trying to mount root from ufs:/dev/ad0s1a
Jan 17 15:41:49 fb62 kernel: WARNING: / was not properly dismounted
Jan 17 15:41:49 fb62 kernel: WARNING: /tmp was not properly dismounted
Jan 17 15:41:49 fb62 kernel: WARNING: /usr was not properly dismounted
Jan 17 15:41:49 fb62 kernel: WARNING: /var was not properly dismounted
Jan 17 15:41:56 fb62 login: ROOT LOGIN (root) ON ttyv0

大大狗

不会吧

剑心通明

在实际的机器试过没？

snow888

嘿嘿!


楼主兄弟,我的 FB62 在虚拟机下面活得挺好。

^_^.

pizigou

上面的我没有看懂。。

unicom_2

VM下mount /cdrom 导致FB重启我相信(我至少有3次以上经历)
FB6.1和OB3.8 上都出现过这样的情况 ,大概步骤如下:
我mount 上了/cdrom(OB先需要先建目录) copy文件,copy完后没umount 在虚拟机上设置CD-ROM上换了别的ISO
然后忽然想起没做umount,就做了umount 然后cd到 /cdrom
ls一下..直接重启,之后无论重启动多少次/cdrom 都mount不上了
但是不是每次都这样,刻意去测试的时候,好象又不死

[ 本帖最后由 unicom_2 于 2007-1-17 20:29 编辑 ]

ppxp

这次是在dell d600，不是vmware环境，崩溃了 fb61。
通过sysinstall 安装portupgrade的时候，系统崩溃。
cdrom再sysinstall前已经手工mount了。

怎么会这样呢？机器的原因？？？？？？？？？？？？？？？？
有碰到这种情况吗？？？？？？？？？？？？？？

zonyonq

fsck检测一下！相关的参照：http://bbs.chinaunix.net/viewthr ... &extra=page%3D1

[ 本帖最后由 zonyonq 于 2007-1-21 08:29 编辑 ]

snow888

原帖由 ppxp 于 2007-1-21 04:20 发表
这次是在dell d600，不是vmware环境，崩溃了 fb61。
通过sysinstall 安装portupgrade的时候，系统崩溃。
cdrom再sysinstall前已经手工mount了。

怎么会这样呢？机器的原因？？？？？？？？？？？？？？？？
...

晕！

我的怎么一次也不崩溃啊！

多想看看崩溃时是什么样子。。。