cisco2611出现这样的提示是什么意思？

halen

02:01:41: %AMDP2_FE-6-EXCESSCOLL: Ethernet0/0 TDR=1, TRC=0
02:01:50: %AMDP2_FE-6-EXCESSCOLL: Ethernet0/0 TDR=8, TRC=0

halen

我以前路由器用的好好的，换线后出现这样的提示不太明白，去网上google发现也有这问题出现,全是英文的不太明白.

halen

有这提示后伴随丢包现象,和大延迟

halen

cpu 使用率30%多

halen

show inter e0/0
reliability 255/255, txload 22/255, rxload 106/255

flood

%AMDP2_FE-6-EXCESSCOLL: [chars] TDR=[dec], TRC=[dec]
Ethernet or Fast Ethernet is seeing multiple collisions. This condition may occur under heavy loads. If an interface fails to allocate a slot in which it can transmit its frame without another collision for 16 times, it will not retry the operation. The frame is not transmitted and is marked as an excessive collision.

halen

如何解决呢？“multiple collisions”
我的cpu和内存使用率不是太高啊！不会有“ heavy loads”

yleagle

估计是IP地址冲突，看看有没有人用一样的IP

halen

没有冲突我查过了！

halen

MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
     reliability 255/255, txload 4/255, rxload 7/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 00:00:05, output 00:00:00, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/10585/0 (size/max/drops/flushes); Total output drops: 943
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 297000 bits/sec, 24 packets/sec
  5 minute output rate 186000 bits/sec, 27 packets/sec
     22262126 packets input, 3642578191 bytes, 0 no buffer
     Received 9364 broadcasts, 0 runts, 0 giants, 0 throttles
     54005 input errors, 0 CRC, 0 frame, 0 overrun, 54005 ignored
     0 input packets with dribble condition detected
     35778414 packets output, 1226389392 bytes, 0 underruns
     6 output errors, 3485037 collisions, 1 interface resets
     0 babbles, 0 late collision, 941824 deferred
     0 lost carrier, 0 no carrier
     0 output buffer failures, 0 output buffers swapped out