在ibmx366上安装freebsd6.2 sas+qla2340+ds400

upandup

6.2re光盘启动支持sas的硬盘，只是还不能驱动qla2340卡
安装时提示
isp0  0x2 command failing
在bsd邮件列表里找到一篇文章
It's failing to attach because there's no firmware loaded into SRAM for the
command to the ROM to execute (that's the 0x2 command failing).

It'd be nice if I had code in place that did the appropriate flash rom read
and hand loaded firmware from the flash rom if I wasn't downloading from
ispfw, but the stuff in flash rom is so unpredictable that I always say "load
the firmware from the kernel".

The reason this is a separate module is that it's big and won't fit on the
install floppy. Also, eventually, we'll be able to reclaim memory from modules
when we unload them. Next year, probably....
现在只要编译一下内核加入对光纤卡fw的支持
在config里开启
device ispfw
ok！
现在能在新一些的机器设备上用freebsd做服务了，感觉不错。
以前看好多人说不能在ibmx系列服务器顺利安装，现在可以了。