论坛徽章:: 0

电梯直达

1楼 [收藏(0)] [报告]

发表于 2007-01-22 11:16 |只看该作者 |倒序浏览

请达人看一下NIM的错误日志,HACMP中error code 为864D2CE3,在上周五报错:9F3821FD后,前者不再报错,详细日志:
---------------------------------------------------------------------------
LABEL:       TS_NIM_ERROR_STUCK_
IDENTIFIER:    864D2CE3

Date/Time:    Tue Jan 16 12:11:17 BEIST 2007
Sequence Number: 2501
Machine Id:    00CF86BD4C00
Node Id:       HQs_ATII_B
Class:          S
Type:          PERM
Resource Name: topsvcs

Description
NIM thread blocked

Probable Causes
A thread in a Topology Services Network Interface Module (NIM) process
was blocked
Topology Services NIM process cannot get timely access to CPU

User Causes
Excessive memory consumption is causing high memory contention
Excessive disk I/O is causing high memory contention

Recommended Actions
Examine I/O and memory activity on the system
Reduce load on the system
Tune virtual memory parameters
Call IBM Service if problem persists

Failure Causes
Excessive virtual memory activity prevents NIM from making progress
Excessive disk I/O traffic is interfering with paging I/O

Recommended Actions
Examine I/O and memory activity on the system
Reduce load on the system
Tune virtual memory parameters
Call IBM Service if problem persists

Detail Data
DETECTING MODULE
rsct,nim_control.C,1.39.1.12,5688
ERROR ID
6XnGH40Z/3f3/tK3/9.ou8....................
REFERENCE CODE

Thread which was blocked
receive thread
Interval in seconds during which process was blocked
         9
Interface name
tty0

-------------------------
---------------------------------------------------------------------------
LABEL:       TS_NIM_ERROR_TRAF_E
IDENTIFIER:    9F3821FD

Date/Time:    Fri Jan 19 15:38:29 BEIST 2007
Sequence Number: 22659
Machine Id:    00CF86BD4C00
Node Id:       HQs_ATII_B
Class:          S
Type:          PERM
Resource Name: topsvcs

Description
NIM excessive packet traffic

Probable Causes
Topology Services Network Interface Module (NIM) error:
Too much outbound packet traffic
Send thread is blocked
Too much inbound packet traffic

Failure Causes
No IP connection remains: Group Services traffic using non-IP link
Excessive message traffic created by Group Services or application
Send thread blocked while sending a packet
Non-IP link is too slow for the Group Services traffic

Recommended Actions
Ensure the IP connections are working
Use a faster baud rate if RS232 device in use
Use a faster non-IP connection between nodes
Send thread blocked: terminate NIM process
Call IBM Service if problem persists

Detail Data
DETECTING MODULE
rsct,nim_control.C,1.39.1.12,5718
ERROR ID
6x50CT0pJ5g3/9uE09.ou8....................
REFERENCE CODE

1: input traffic 0: output traffic
         0
Error detailed information
value1: queue size
Error data 1
      2000
Error data 2
         0
Interface name
tty0

------------------
谢谢!!!!!!!!!