openfiler iscsi for linux client

yxtg

1. 
   
2. 
   
3. 1、安装openfiler系统
   
4. 2、分区等web方式操作
   
5. 
   
6. 
   
7. /etc/ietd.conf：
   
8. 
   
9. # Generated at: Wed Feb 28 14:17:50 EST 2007
   
10. #
    
11. 
    
12. 
    
13. Target iqn.2006-01.com.ustcsoft:power.ocr
    
14.         Lun 0 Path=/dev/power/ocr,Type=fileio,ScsiId=powerocr
    
15. 
    
16. Target iqn.2006-01.com.ustcsoft:power.asm
    
17.         Lun 0 Path=/dev/power/asm,Type=fileio,ScsiId=powerasm
    
18. 
    
19. Target iqn.2006-01.com.ustcsoft:power.vote
    
20.         Lun 0 Path=/dev/power/vote,Type=fileio,ScsiId=powervote
    
21. 
    
22. Target iqn.2006-01.com.ustcssoft:telcom.ocfs2
    
23.         Lun 0 Path=/dev/telcom/ocfs2,Type=fileio,ScsiId=powerocfs2
    
24. 
    
25. 
    
26. # End of Openfiler iSCSI configuration
    
27. 
    
28. 注意，每次修改配置，都会重新写/etc/ietd.conf文件
    
29. 
    
30. 3、client:
    
31. /etc/iscsi.conf：
    
32. 
    
33. DiscoveryAddress=ed-otfiler02
    
34. 
    
35. 4、client:
    
36. fdisk -l:
    
37. 
    
38. Disk /dev/sdc: 16.2 GB, 16206790656 bytes
    
39. 64 heads, 32 sectors/track, 15456 cylinders
    
40. Units = cylinders of 2048 * 512 = 1048576 bytes
    
41. 
    
42. Disk /dev/sdc doesn't contain a valid partition table
    
43. 
    
44. Disk /dev/sdd: 134 MB, 134217728 bytes
    
45. 5 heads, 52 sectors/track, 1008 cylinders
    
46. Units = cylinders of 260 * 512 = 133120 bytes
    
47. 
    
48. Disk /dev/sdd doesn't contain a valid partition table
    
49. 
    
50. Disk /dev/sde: 23.1 GB, 23119003648 bytes
    
51. 64 heads, 32 sectors/track, 22048 cylinders
    
52. Units = cylinders of 2048 * 512 = 1048576 bytes
    
53. 
    
54. Disk /dev/sde doesn't contain a valid partition table
    
55. 
    
56. Disk /dev/sdf: 33 MB, 33554432 bytes
    
57. 2 heads, 32 sectors/track, 1024 cylinders
    
58. Units = cylinders of 64 * 512 = 32768 bytes
    
59. 
    
60. Disk /dev/sdf doesn't contain a valid partition table
    
61. 
    
62. 
    
63. 
    

复制代码

yxtg

1. 
   
2. 
   
3. 其它几个需要注意的细节：
   
4. 
   
5. 1、Services
   
6.         iSCSI target：Enabled
   
7. 2、Volume's properties设置允许访问该volume的client
   
8. 
   
9. 3、每次修改都会修改/etc/ietd.conf文件，应该在修改之前备份，并调整修改后/etc/ietd.conf的参数
   
10. 
    

复制代码