putty :Software caused connection abort

canbetter

我的freebsd托管出去

PUTTY连上一会后，出现。Software caused connection abort，就断掉了，然后再次连还能连上
有谁碰到类似的问题吗？
这个是我freebsd的问题，还是托管商的问题

HonestQiao

网络品质不好可能会出现这样子的问题。

红火蚁

现在非常郁闷中

carrison

Error Message:

Software caused connection abort.

Explanation:

This error can occur when the local network system aborts a connection, such as when Winsock closes an established connection after data retransmission fails (receiver never acknowledges data sent on a datastream socket).

User Action:

Check the following: 1. Ping the remote host you were connected to. If it doesn't respond, it might be offline or there might be a network problem along the way. If it does respond, this problem might have been a transient one (so you can reconnect now), or the server application you were connected to might have terminated (so you might not be able to connect again). 2. Ping a local host to verify that your local network is still functioning (if on a serial connection, see next step). 3. Ping your local router address. If you are on a serial connection, your local router is the IP address of the host you initially logged on to using SLIP or PPP. 4. Ping a host on the same subnet as the host you were connected to (if you know of one). This will verify that the destination network is functioning. 5. Type tracert at the command prompt to determine the path to the host you were connected to. This won't reveal too much unless you know the router addresses at the remote end, but it might help to identify if the problem is somewhere along the way.

我今天也遇到了，呵呵，还在找解决办法...

carrison

可以考虑把timeout设大一点，
A.7.11 PuTTY's network connections time out too quickly when network connectivity is temporarily lost.

This is a Windows problem, not a PuTTY problem. The timeout value can't be set on per application or per session basis. To increase the TCP timeout globally, you need to tinker with the Registry.

On Windows 95, 98 or ME, the registry key you need to create or change is
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VxD\
  MSTCP\MaxDataRetries

(it must be of type DWORD in Win95, or String in Win98/ME). (See MS Knowledge Base article 158474 for more information.)

On Windows NT, 2000, or XP, the registry key to create or change is
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\
  Parameters\TcpMaxDataRetransmissions

and it must be of type DWORD. (See MS Knowledge Base articles 120642 and 314053 for more information.)

Set the key's value to something like 10. This will cause Windows to try harder to keep connections alive instead of abandoning them.

meteormatt

可以考虑把timeout设大一点，
A.7.11 PuTTY's network connections time out too quickly when network co ...
carrison 发表于 2007-10-18 10:21

好的.