cisco 7507报错自动重启,附报错信息,请各位看看是什么原因.

cqtnt

cisco 7507报错自动重启,附报错信息,请各位看看是什么原因.


Cisco IOS Software, RSP Software (RSP-ISV-M), Version 12.3(14)T6, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Thu 05-Jan-06 09:02 by dchih
ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1)
jginternet uptime is 1 hour, 2 minutes
System returned to ROM by bus error at PC 0x404F1FD0, address 0x31372D35 at 07:29:16 beijing Tue Apr 3 2007System restarted at 15:55:34 beijing Mon Apr 2 2007
System image file is "slot0:rsp-isv-mz.123-14.T6.bin"
Cisco RSP8 (R7000) processor with 262144K/8216K bytes of memory.
R7000 CPU at 250MHz, Implementation 39, Rev 2.1, 256KB L2, 2048KB L3 Cache
Last reset from power-on
Chassis Interface.
1 VIP4-80 RM7000 controller (2 FastEthernet).
2 FastEthernet interfaces
2043K bytes of NVRAM.
32768K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
16384K bytes of Flash internal SIMM (Sector size 256K).
No slave installed in slot 2.
Configuration register is 0x2102
       最近一个月7507经常报bus error错误,然后就自动重新启动.IOS为Version 12.3(14)T6.路由主要用于NAT转换.请大家帮忙分析一下是什么原因导致报错.是不是路由板卡硬件问题.
       还有一个问题,7507上的模块,比如以太网接口模块,引擎是否可以在7206上使用.

bzzh

You should also consider upgrading the Cisco IOS software release to a version which has a fix for CSCdv68388 - "Change cache error exception handler to resume not crash" which has been fixed since Cisco IOS Software Release 12.2(10).