V890 alom的默认用户和口令是多少

goatzhou

V890 alom的默认用户和口令是多少，有谁知道的。

bencyber

用户名是admin,第一次登陆配置时会提示你设置密码,用户名是admin,如忘记了密码,可以用rscadm命令来重新设置密码.

goatzhou

我也知道是admin，也知道第一次要但是今天我装一台新的890，登录alom就提示
Please login: admin
Please Enter password:

Invalid login.
Please login: admin
Please Enter password:

我就搞不懂了

bencyber

root@sunv890#  man rscadm
Reformatting page.  Please Wait... done

System Administration Commands                         rscadm(1M)

NAME
     rscadm - administer SUN(tm) Remote System Control (RSC)

SYNOPSIS
     rscadm help
     rscadm resetrsc [-s]
     rscadm set variable value
     rscadm download [boot] file
     rscadm show [variable]
     rscadm date [-s] | [[mmdd]HHMM | mmddHHMM[cc]yy][.SS]
     rscadm send_event [-c] message
     rscadm modem_setup
     rscadm useradd username
     rscadm userdel username
     rscadm usershow [username]
     rscadm userpassword username
     rscadm userperm username [cuar]
     rscadm shownetwork
     rscadm loghistory
     rscadm version

     Note: The shownetwork, loghistory, and version commands are
     not available on the E250.

..........

rscadm userpassword     Set a password for the user  account
                             specified.   This password overrides
                             any existing password currently set.
                             There  is no verification of the old
                             password  before  setting  the   new
                             password.  See the RSC documentation
                             on valid password formats.

goatzhou

v890后面以前rsc卡的地方现在只有2个RJ45的serial  & Net 管理口，sunsolve上面也写的是alom board，那默认的就应该是admin用户，但是我连到serial 上面 输出内容如下，这个到底是怎么回事，不明白了。还是说这个就是rsc卡，还是要装好系统 以后再装rsc软件才能用？
Please login: Welcome to RSC bootmon v2.2.2

Reset register: e0000000 EHRS ESRS LLRS





RSC2 POST  -  Version 10-18-2000 0.7

Dual Port Memory Test, PASSED.

TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.

TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.

TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.

Memory Data Lines Test
Memory Data Lines Test, PASSED.

Memory Address Lines Test
  Slide address bits to test open address lines
  Test for shorted address lines
Memory Address Lines Test, PASSED.

Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.



Return to Boot Monitor for Handshake  

RSC2 POST  -  Version 10-18-2000 0.7   Status = 00007fff

Returned from Boot Monitor and Handshake



Instruction CACHE Test
  DISABLE the I-CACHE
  ENABLE the I-CACHE
  Verify I-CACHE Performance Increase
Instruction CACHE Test, PASSED.

Memory Cells Test
  Counting UP:    Write data:  00000000
  Counting DOWN:  Read - Verify - Write data:  ffffffff
  Counting UP:    Read - Verify - Write data:  55aa33cc
  Counting DOWN:  Read - Verify - Write data:  aa33cc66
  Counting UP:    Read - Verify - Write data:  33cc6699
  Counting DOWN:  Read - Verify - Write data:  cc669955
  Counting UP:    Read - Verify - Write data:  669955aa
  Counting DOWN:  Read - Verify - Write data:  9955aa33
  Counting UP:    Read - Verify - Write data:  f0f0f0f0
Memory Cells Test, PASSED.

Data CACHE Test
  Verify D-CACHE Performance Increase
    D-CACHE Performance Increase I-CACHE Disabled
    D-CACHE Performance Increase I-CACHE Enabled
  Verify D-CACHE Memory
Data CACHE Test, PASSED.

Main Sectors FLASH CRC Test
Main Sectors FLASH CRC Test, PASSED.

Load the RSC, then run the VxDiags ?

RSC version 2.2.2 ()



Full VxDiag Tests

BASIC TOD TEST
  Read the TOD Clock:        WED MAY 30 10:50:10 2007
  Wait, 1 - 3 seconds        
  Read the TOD Clock:        WED MAY 30 10:50:12 2007
BASIC TOD TEST, PASSED

ETHERNET CPU LOOPBACK TEST
  50 BYTE PACKET   - a 0 in field of 1's.  
  50 BYTE PACKET   - a 1 in field of 0's.  
  900 BYTE PACKET  - pseudo-random data.  
ETHERNET CPU LOOPBACK TEST, PASSED

Full VxDiag Tests - PASSED



    Status summary  -  Status = 7FFF

       VxDiag    -          -  PASSED
       POST      -          -  PASSED
       LOOPBACK  -          -  PASSED

       I2C       -          -  PASSED
       EPROM     -          -  PASSED
       FRU PROM  -          -  PASSED

       ETHERNET  -          -  PASSED
       MAIN CRC  -          -  PASSED
       BOOT CRC  -          -  PASSED

       TTYD      -          -  PASSED
       TTYC      -          -  PASSED
       MEMORY    -          -  PASSED
       MPC860    -          -  PASSED


Please login: admin
Please Enter password:

Invalid login.
Please login: rsc
Please Enter password:

Invalid login.
Please login: admin
Please Enter password:

Invalid login.
Please login: admin
Please Enter password:

Invalid login.
Please login:
RSC Alert: Host system has shut down.

Please login:
Please login:
Please login:
Please login:
Please login: admin
Please Enter password:

Invalid login.

东方蜘蛛

首先lz应该搞清楚的是V890没有ALOM口，只有RSC口，这两个是不同的东西！V890的RSC需要配置才可以使用，没有配置是不能使用的，具体怎么配置可以搜索一下精华贴里面，有人做贴过的！如果配置过了，却忘了密码，可以用命令rscadm userpassword username修改密码，或是重新配置一下RSC！

tzpi2000

这个我做过，还是在sun的技术支持做过，，      可以使用一下的命令来改变                                                                                               /usr/platform/`uname -i`/rsc/rscadm useradd <username>
          /usr/platform/`uname -i`/rsc/rscadm userperm <username> cuar
          /usr/platform/`uname -i`/rsc/rscadm userpassword <username>