- 论坛徽章:
- 0
|
我正在调试一台CISCO2621+16AM,到内网之间还有防火墙,现在拨号用户已经可以通过2621上网且能PING通内网的IP,服务器IP是192.168.1.1,上面有DNS、WINS服务:另外现在可以ping通服务器名字(因为建立WINS服务是有一条默认的服务器映射),在WINS服务中添加别的机器的静态映射一样可以在远程PING通,但是在网络邻居上除了自己的机器访问不了所有的机器包括服务器,提示“无法访问workgroup。指定的文件是只读文件”,也搜索不到。最重要的是远程的机器要通过IE访问B/S应用,比如在地址栏中输入http://oa”(oa是服务器的名字,在DNS中也有相应的记录)就可以登录访问界面。
另外我的机器是WIN2000。
各位大哥帮帮忙,想想办法吧,我现在一点思路都没有了!!!
----------------------------------------------
配置如下:
hostname c2621
!
enable secret 5
!
username master password 0
ip subnet-zero
!
!ip name-server 192.168.1.1
async-bootp nbns-server 192.168.1.1
!
interface FastEthernet0/0
ip address 10.1.1.1 255.255.255.0
ip nat inside
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 211.139.x.x 255.255.255.240
ip nat outside
duplex auto
speed auto
!
interface Group-Async1
ip unnumbered FastEthernet0/0
ip nat inside
encapsulation ppp
async mode dedicated
peer default ip address pool dial
ppp authentication chap
group-range 33 48
!
ip local pool dial 10.1.1.100 10.1.1.115
ip nat pool zhenhua 211.139.x.xx 211.139.x.xx netmask 255.255.255.240
ip nat inside source list 1 pool zhenhua overload
ip nat inside source static 10.1.1.250 211.139.x.xx
ip classless
ip route 0.0.0.0 0.0.0.0 211.139.x.xx
ip route 10.2.2.0 255.255.255.0 10.1.1.3
ip route 10.2.2.3 255.255.255.255 10.1.1.3
ip route 192.168.1.0 255.255.255.0 10.1.1.3
ip route 192.168.3.0 255.255.255.0 10.1.1.3
ip route 192.168.5.0 255.255.255.0 10.1.1.3
ip http server
no ip pim bidir-enable
!
!
access-list 1 permit 10.1.1.0 0.0.0.255
!
line con 0
line 33 48
login local
modem InOut
transport input all
autoselect during-login
autoselect ppp
stopbits 1
flowcontrol hardware
line aux 0
line vty 0 4
password
login
!
!
end |
|