Samba新手问题

nirvana

用源码方式在RHEL 4上安装了Samba 3.0.25b的版本! 安装时除了./configure时看到一些no的提示外, make ,make install都无错误提示

然后以/usr/local/samba/smbd -D  /usr/local/samba/nmbd -D启动,但是不确定服务是否启动还是根本没装好,请教校验方法!谢谢!



[root@EXPED samba]# /usr/local/samba/sbin/smbd -D
[root@EXPED samba]# /usr/local/samba/sbin/nmbd -D
[root@EXPED samba]# testparm  /etc/samba/smb.conf
Load smb config files from /etc/samba/smb.conf
Processing section "[homes]"
Processing section "[printers]"
Loaded services file OK.
Server role: ROLE_STANDALONE
Press enter to see a dump of your service definitions

# Global parameters
[global]
        workgroup = EXPED
        server string = Samba Server
        security = SHARE
        log file = /var/log/samba/%m.log
        max log size = 50
        socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
        printcap name = /etc/printcap
        dns proxy = No
        idmap uid = 16777216-33554431
        idmap gid = 16777216-33554431
        cups options = raw

[homes]
        comment = Home Directories
        read only = No
        browseable = No

[printers]
        comment = All Printers
        path = /var/spool/samba
        printable = Yes
        browseable = No
[root@EXPED samba]#

ireneonojc

# /usr/local/samba/bin/smbclient –L yourIP
就能看能不能用了

csws

rpm -qa | grep samba
看rpm包裝好沒

service smb restart
看能否正常啟動

nirvana

改用/usr/local/samba/smbd &  
/usr/local/samba/nmbd &这种命令后可以看到有进程号,可惜进程马上退出,看来配置上还是有问题

[root@EXPED ~]# /usr/local/samba/sbin/nmbd &
[1] 15640
[root@EXPED ~]# /usr/local/samba/sbin/smbd &
[2] 15641
[1]   Exit 255                /usr/local/samba/sbin/nmbd

现在改研究这个问题谢谢楼上2位

hzq1984

smb://ip地址