请教 光纤交换机密码

huigeonline

FOSV2.6 password recovery:
1. Open a serial connection to the switch. Use Windows HyperTerminal in Windows or Kermit in UNIX. 2. Power cycle the switch. 3. From the serial console window, press any key when the message Press any key to stop auto-boot... This will display the boot prompt. 4. At the [VxWorks Boot] prompt, type c and press enter to start changing the boot parameters in order to boot from the network.

itubie

root的密码是fibranne
但是改了后
需要rs232-usb连上去

怎么会把root都改掉了

没有办法了

saintdragon

难道没有恢复默认值的设置？

rudy

我好象我办法，但不知道怎么帮你～

天涯明月刀

The system is coming up, please wait...
Read board ID of 0x80 from addr 0x23
Read extended model ID of 0x16 from addr 0x22
Matched board/model ID to platform index 4
PCI Bus scan at bus 0
: : :
: : :
Checking system RAM - press any key to stop test
Checking memory address: 00100000
System RAM test using Default POST RAM Test succeeded.
Press escape within 4 seconds to enter boot interface.
Booting "Fabric Operating System" image.
Linux/PPC load:
BootROM command line: quiet
Uncompressing Linux...done.

wilysezhang

boot from the network?
是否能进去修改了密码？
还没过去试
这两天试试看
谢谢楼上先
如果解决  一定兑现

redwaves

刷firmware

wilysezhang

我怎么给你积分呢