免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 3072 | 回复: 1

Device ssd0 failed to power up [复制链接]

论坛徽章:
0
发表于 2007-08-18 23:20 |显示全部楼层
v880,solaris 9 , 6块硬盘,昨天断电后搬了一下机器,今天开不了,出现Device ssd0 failed to power up错误,ok下用probe-scsi-all  一直bus fault循环,怎么办?各位大侠帮帮忙!

论坛徽章:
0
发表于 2007-08-19 14:54 |显示全部楼层
Hi,PLS do some work as below:

1. in OK promapt
ok reset-all
2. when the reset is complate,the prompat will to OK,now you can run prob-scsi-all to check the system scsi hardware status
ok probe-scsi-all
3.if the hard disk has been verifyed is normal,you maybe run MAX POST to check the system hardware stauts.
ok setenv auto-boot? false
ok setenv diag-level max
ok setenv diag-switch? true
ok reset-all
4.when POST run is over,you can run "show-post-results" to check the repot of the POST
5.If there no problem ,then you can boot up server,if it's normal boot up ,so the problem has been resolved
6.if there have not the hardware error,but the system can not boot up, PLS check the / file system by CD-ROM
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP