xinetd 无法启动 cvspserver 服务?

little3li

配置cvs时我检查/etc/xinet.d/cvspserver /etc/services后,
重启xinetd发现xinet无法启动cvspserver服务
[root@localhost godyee]# netstat -l | grep cvs 没有结果
由于对网络部分不熟将系统防火墙部分和
xinetd部分的信息也附上请熟悉网络和CVS配置的兄弟给予帮助
/**********CVS 部分***********/
[root@localhost godyee]# cat /etc/services | grep cvs
cvspserver 2401/tcp # CVS client/server operations
cvspserver 2401/udp # CVS client/server operations
cvsup 5999/tcp CVSup # CVSup file transfer/John Polstra/FreeBSD
cvsup 5999/udp CVSup # CVSup file transfer/John Polstra/FreeBSD
/*************************/
[root@localhost godyee]# cat /etc/xinetd.d/cvspserver
service cvspserver
{
disable = no
flags = REUSE
socket_type = stream
wait = no
user = root
protocal = tcp
env = HOME =
server = /usr/bin/cvs
server_args = -f --allow-root=/home/cvsroot pserver
log_on_failure += USERID
}
/*********xinetd 部分********/
[root@localhost godyee]# /sbin/chkconfig --list
xinetd 0:关闭 1:关闭 2:关闭 3:启用 4:启用 5:启用 6:关闭
iptables 0:关闭 1:关闭 2:启用 3:启用 4:启用 5:启用 6:关闭
基于 xinetd 的服务：
cvspserver: 启用
[root@localhost godyee]# cat /etc/xinetd.conf
#
# Simple configuration file for xinetd
#
# Some defaults, and include /etc/xinetd.d/

defaults
{
instances = 60
log_type = SYSLOG authpriv
log_on_success = HOST PID
log_on_failure = HOST
cps = 25 30
}

includedir /etc/xinetd.d
/*********iptables 部分********/
[root@localhost godyee]# cat /etc/sysconfig/iptables
# Firewall configuration written by lokkit
# Manual customization of this file is not recommended.
# Note: ifup-post will punch the current nameservers through the
# firewall; such entries will *not* be listed here.
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:RH-Lokkit-0-50-INPUT - [0:0]
-A INPUT -j RH-Lokkit-0-50-INPUT
-A FORWARD -j RH-Lokkit-0-50-INPUT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 2401 --syn -j ACCEPT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 22 --syn -j ACCEPT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 23 --syn -j ACCEPT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 25 --syn -j ACCEPT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 80 --syn -j ACCEPT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 21 --syn -j ACCEPT
-A RH-Lokkit-0-50-INPUT -p udp -m udp -s 0/0 --sport 67:68 -d 0/0 --dport 67:68 -i eth0 -j ACCEPT
-A RH-Lokkit-0-50-INPUT -p udp -m udp -s 0/0 --sport 67:68 -d 0/0 --dport 67:68 -i eth1 -j ACCEPT
-A RH-Lokkit-0-50-INPUT -i lo -j ACCEPT
-A RH-Lokkit-0-50-INPUT -i eth0 -j ACCEPT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 0:1023 --syn -j REJECT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 2049 --syn -j REJECT
-A RH-Lokkit-0-50-INPUT -p udp -m udp --dport 0:1023 -j REJECT
-A RH-Lokkit-0-50-INPUT -p udp -m udp --dport 2049 -j REJECT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 6000:6009 --syn -j REJECT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 7100 --syn -j REJECT
COMMIT
/********调整防火墙设置 中级 增加 cvspserver:tcp 服务*********/
[root@localhost godyee]# setup
[root@localhost godyee]# /sbin/iptables --list
Chain INPUT (policy ACCEPT)
target prot opt source destination
RH-Lokkit-0-50-INPUT all -- anywhere anywhere

Chain FORWARD (policy ACCEPT)
target prot opt source destination
RH-Lokkit-0-50-INPUT all -- anywhere anywhere

Chain OUTPUT (policy ACCEPT)
target prot opt source destination

Chain RH-Lokkit-0-50-INPUT (2 references)
target prot opt source destination
ACCEPT tcp -- anywhere anywhere tcp dpt:cvspserver flags:SYN,RST,ACK/SYN
ACCEPT tcp -- anywhere anywhere tcp dpt:ssh flags:SYN,RST,ACK/SYN
ACCEPT tcp -- anywhere anywhere tcp dpt:telnet flags:SYN,RST,ACK/SYN
ACCEPT tcp -- anywhere anywhere tcp dpt:smtp flags:SYN,RST,ACK/SYN
ACCEPT tcp -- anywhere anywhere tcp dpt:http flags:SYN,RST,ACK/SYN
ACCEPT tcp -- anywhere anywhere tcp dpt:ftp flags:SYN,RST,ACK/SYN
ACCEPT udp -- anywhere anywhere udp spts:bootps:bootpc dpts:bootps:bootpc
ACCEPT udp -- anywhere anywhere udp spts:bootps:bootpc dpts:bootps:bootpc
ACCEPT all -- anywhere anywhere
ACCEPT all -- anywhere anywhere
REJECT tcp -- anywhere anywhere tcp dpts:0:1023 flags:SYN,RST,ACK/SYN reject-with icmp-port-unreachable
REJECT tcp -- anywhere anywhere tcp dpt:nfs flags:SYN,RST,ACK/SYN reject-with icmp-port-unreachable
REJECT udp -- anywhere anywhere udp dpts:0:1023 reject-with icmp-port-unreachable
REJECT udp -- anywhere anywhere udp dpt:nfs reject-with icmp-port-unreachable
REJECT tcp -- anywhere anywhere tcp dpts11:6009 flags:SYN,RST,ACK/SYN reject-with icmp-port-unreachable
REJECT tcp -- anywhere anywhere tcp dptfs flags:SYN,RST,ACK/SYN reject-with icmp-port-unreachable
/*****************/
至此仍然无法启动 cvspserver 服务?

little3li

已解决