3D问题：找不到i915_dri.so[已解决]

lonelywing

root@FreeBSD[/root]dmesg | grep agp
agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port 0xc000-0xc007 mem 0xf0000000-0xf7ffffff,0xfaf80000-0xfaffffff irq 11 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
drmsub0: <Intel i852GM/i855GM GMCH>: (child of agp_i810.c) on agp0

root@FreeBSD[/root]dmesg | grep drm
drmsub0: <Intel i852GM/i855GM GMCH>: (child of agp_i810.c) on agp0
info: [drm] AGP at 0xf0000000 128MB
info: [drm] Initialized i915 1.4.0 20060119


root@FreeBSD[/root]cat /var/log/Xorg.0.log | grep "direct rendering"
(II) I810(0): direct rendering: Enabled


root@FreeBSD[/root]glxinfo
name of display: :0.0
libGL: XF86DRIGetClientDriverName: 1.4.1 i915 (screen 0)
libGL: OpenDriver: trying /usr/X11R6/lib/modules/dri/i915_dri.so
libGL error: dlopen /usr/X11R6/lib/modules/dri/i915_dri.so failed (Cannot open "/usr/X11R6/lib/modules/dri/i915_dri.so")
libGL error: unable to find driver: i915_dri.so
display: :0  screen: 0
direct rendering: No

[ 本帖最后由 lonelywing 于 2007-3-4 22:10 编辑 ]

lonelywing

我没编译过内核，是不是默认内核不支持？？

lonelywing

不知道哪个起作用，还是两个都是必须的步骤：

1.内核加入
device drm
device i915drm
编译安装
但还是不行

2.再安装了这个port
/usr/ports/graphics/dri/
成功了


root@FreeBSD[/root]glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: yes


开心啊