ChinaUnix.net
相关文章推荐:

linux c 线程

/* 关于5个专家的故事,每人手中只有一根筷, 论流用别人筷子吃面,吃完面就还别人的 筷................ */ #include //线程头文件 #include #include//线程信号变量头文件 #include #define N 5 //专家人数 pthread_mutex_t chopstick[N]; sem_t cn; int x[5]; /*----------------- 拿起筷 ------------*/ void pick_up(int a) { sem_wait(&cn); //P操作: (cn-1) >0? 获取意资源 pthread_mutex_lock(&chopsti...

by piaoyizu - Linux文档专区 - 2008-12-17 21:25:13 阅读(679) 回复(0)

相关讨论

我现在写一个服务端程序,要求可以链接多个客户端 有报警信息时要能发送报警信息,如果客户端有数据发来时,接收客户端的信息 现在运行起来有问题,当我打开第一个客户端时运行正常,当我断开这个链接,再重新打开一个客户端时,发送时就出现了问题,情况如下: 第一个链接 There is a new socket link coming 4! alarmtype = 50 data from socket 4, bytes = 1212 data from socket 4, bytes = 1212 Socket link 4 disconnect! 第...

by yel617 - Linux环境编程 - 2012-06-20 19:02:28 阅读(10114) 回复(8)

如果把数据分配给特定的线程来实行。 比如:线程A,线程B,线程c 指令A,指令B,指令c 指令A分配线程A,同理

linux多线程

by youzlm - C/C++ - 2011-02-21 21:16:34 阅读(2202) 回复(7)

打印异常. thread exiting, not yet detached (count=0) thread exiting, not yet detached (count=1) native thread exited without detaching 在线程内已经添加退出代码 pthread_detach(pthread_self()); pthread_exit((void *)0); 麻烦各位指教

linux

by jiangpingzhan - C/C++ - 2011-03-02 15:12:59 阅读(5447) 回复(6)

大家好: 在线程同步中我希望我编的程序显示结果为: this is 0 this is 1 this is 2 this is 3 this is 4 this is 5 但是我用下面程序显示出来的结果是 this is 134513824 this is 134513825 this is 134513826 this is 134513827 this is 134513828 this is 134513829 this is 134513830 this is 134513831 this is 134513832 this is 134513833 this is 134513834 this is 134513835 以下递增不断打印出来:this is XXXXX...

by 爱上吃薯片 - Linux环境编程 - 2011-01-15 18:16:09 阅读(1321) 回复(2)

大家好: 在线程同步中我希望我编的程序显示结果为: this is 0 this is 1 this is 2 this is 3 this is 4 this is 5 但是我用下面程序显示出来的结果是 this is 134513824 this is 134513825 this is 134513826 this is 134513827 this is 134513828 this is 134513829 this is 134513830 this is 134513831 this is 134513832 this is 134513833 this is 134513834 this is 134513835 以下递增不断打印出来:this is XXXXX...

by 爱上吃薯片 - C/C++ - 2011-01-15 19:28:53 阅读(3047) 回复(10)

1.color="red">linux“线程” 进程与线程之间是有区别的,不过color="red">linux内核只提供了轻量进程的支持,未实现线程模型。color="red">linux是一种“多进程单线程”的操作系统。color="red">linux本身只有进程的概念,而其所谓的“线程”本质上在内核里仍然是进程。 大家知道,进程是资源分配的单位,同一进程中的多个线程共享该进程的资源(如作为共享内存的全局变量)。color="red">linux中所谓的“线程”只是在被创建时clone了父进程的资源,因此clone出来的进程表现为“线程...

by giant1st - Linux文档专区 - 2009-12-03 17:31:46 阅读(763) 回复(0)

1.color="red">linux“线程” 进程与线程之间是有区别的,不过color="red">linux内核只提供了轻量进程的支持,未实现线程模型。color="red">linux是一种“多进程单线程”的操作系统。color="red">linux本身只有进程的概念,而其所谓的“线程”本质上在内核里仍然是进程。 大家知道,进程是资源分配的单位,同一进程中的多个线程共享该进程的资源(如作为共享内存的全局变量)。color="red">linux中所谓的“线程”只是在被创建时clone了父进程的资源,因此clone出来的进程表现为“线程”,这一点...

by 逼良为娼 - Linux文档专区 - 2009-07-09 10:22:05 阅读(717) 回复(0)

写了一段应用程序,发现有内存泄漏。把程序分开测试,发现问题出在线程资源这一块,请各位大虾帮忙指点一二,最好能编译测试一下,我已经测试一个多星期了,就是没有找出原因,初学者,请多关照:) /**************pthreadtest2.cpp ****************/ #include #include #include ctor> #include #include #include #include using namespace std; ...

by sevendays - C/C++ - 2005-12-27 13:14:36 阅读(11010) 回复(29)

以下是源码,运行以后,子线程没有死循环,随主线程退出了,但是用join等待正常 void* func() { while(1) { printf("111\n"); sleep(1); } } void main() { pthread_t pid; int ret; pthread_attr_t attr; memset(&pid,0,sizeof(pthread_t)); pthread_attr_init(&attr); ret = pthread_attr_setdetachstate(&attr,PTHREAD_cREATE_DETAcHED); if(ret) { perror...

linux

by 1581526111 - C/C++ - 2016-07-13 06:00:43 阅读(3612) 回复(8)

寻找color="red">linux下c++多线程编程的资料,想学习一下c++的多线程编程,网络上资料不多啊。

by gridbird - C/C++ - 2011-06-28 00:47:46 阅读(5170) 回复(6)