ChinaUnix.net
相关文章推荐:

cdev_add

int cdev_add(struct cdev* dev,dev_t num,unsigned int count) LDD3中说num是该设备对应的第一个设备编号,count是应该和该设备关联的设备编号的数量.count经常取1,但是在某些情况下,会有多个设备编号对应于一个特定的设备. 我还是不明白count的含义.

by whoisliang - 内核源码 - 2011-12-18 19:39:57 阅读(14312) 回复(9)

相关讨论

在Linux2.6内核中一个字符设备用cdev结构来描述,其定义如下: struct cdev { struct kobject kobj; struct module *owner; //所属模块 const struct file_operations *ops; //文件操作结构,在写驱动时,其结构体内的大部分函数要被实现 struct list_head list; dev_t dev; //设备号,int 类型,高12位为主设备号,低20位为次设备号 unsigned int...

by li6237 - Linux文档专区 - 2010-01-31 20:26:27 阅读(970) 回复(0)

在Linux2.6内核中一个字符设备用cdev结构来描述,其定义如下: struct cdev { struct kobject kobj; struct module *owner; //所属模块 const struct file_operations *ops; //文件操作结构,在写驱动时,其结构体内的大部分函数要被实现 struct list_head list; dev_t dev; //设备号,int 类型,高12位为主设备号,低20位为次设备号 unsigned ...

by chenjifeng - Linux文档专区 - 2008-07-28 20:46:02 阅读(529) 回复(0)

这两天看linux设备模型看得我稀里糊涂了。 在我以前看的资料中,通过inode的成员struct cdev *i_cdev找到字符设备, 字符设备中有struct kobject kobj;struct file_operation *ops;等成员; file_operation里包含了所有操作文件(这里是设备文件)函数的指针。漏讲了 主设备号和次设备号分别标识驱动程序和设备。感觉条理非常清楚。 现在来了个linux设备模型。一下子就把我给打晕了,先是 struct cdev 和struct d...

by 陈九CU - 内核源码 - 2013-06-05 22:08:02 阅读(4784) 回复(4)

cdev_alloc 可以用来动态分配一个struct cdev 结构 函数原型: struct cdev *cdev_alloc(void) ; 问题: 要想动态或者一个struct cdev,用kmalloc不就可以了吗?为什么还有一个专门的处理函数?

by qiangqiang02 - 驱动开发 - 2009-11-07 23:11:06 阅读(3178) 回复(2)

内核中每个字符设备都对应一个 cdev 结构的变量,下面是它的定义: linux-2.6.22/include/linux/cdev.h struct cdev { struct kobject kobj; // 每个 cdev 都是一个 kobject struct module *owner; // 指向实现驱动的模块 const struct file_operations *ops; // 操纵这个字符设备文件的方法 struct list_head list; // 与 cdev 对应的字符设备文件的 inode->i_devices 的...

by dongtianzhe - Linux文档专区 - 2009-04-13 16:16:20 阅读(1967) 回复(0)

怎么ULK上说代表字符设备驱动,LDD上说代表字符设备

by specter117 - 内核源码 - 2007-12-21 16:24:31 阅读(1827) 回复(2)

在看ldd3的时候里面讲内核用struct cdev结构来表示字符设备 在使用中碰到点疑惑 我这有2个驱动的例子 第一个 键盘驱动 result = register_chrdev(KEYBOARD_MAJOR, "Key7279", &Key7279_fops); 这个里面就是这么注册的,没有用到struct cdev 这个结构体 第二个 IO驱动 cdev_init(&myled_dev.cdev, &myled_fops); myled_dev.cdev.owner = THIS_MODULE; ret=alloc_chrdev_region(&led_dev,0,1,"myled"); 这个里面就用到了struct cd...

by yel617 - 驱动开发 - 2010-03-24 10:20:22 阅读(3543) 回复(5)

内核中每个字符设备都对应一个 cdev 结构的变量,下面是它的定义: linux-2.6.22/include/linux/cdev.h struct cdev { struct kobject kobj; // 每个 cdev 都是一个 kobject struct module *owner; // 指向实现驱动的模块 const struct file_operations *ops; // 操纵这个字符设备文件的方法 struct list_head list; // 与 cdev 对应的字符设备文件的 inode->i_devices 的链表头 dev_t dev...

by gaofei8530 - Linux文档专区 - 2009-09-11 08:16:16 阅读(983) 回复(0)

内核中每个字符设备都对应一个 cdev 结构的变量,下面是它的定义: linux-2.6.22/include/linux/cdev.h struct cdev { struct kobject kobj; // 每个 cdev 都是一个 kobject struct module *owner; // 指向实现驱动的模块 const struct file_operations *ops; // 操纵这个字符设备文件的方法 struct list_head list; // 与 cdev 对应的字符设备文件的 inode->i_devices 的...

by leanderlee - Linux文档专区 - 2009-03-02 21:55:38 阅读(624) 回复(0)

About_devfs_mk_cdev() after compiling button.c successfully, a warning shows up that implicit declaration of the function devfs_mk_cdev. on night they say that it is because the function is used before it delaration, I think it is true, but I also suspect that the right .h file containing this function is not included. I later find out that I am right two in my yc_kernel, there is only one file co...

by happypeter - Linux文档专区 - 2008-03-05 23:22:15 阅读(858) 回复(0)