ChinaUnix.net
相关文章推荐:

fsck -y

谁能解释一下下面两个命令的运行结果有何不同: fsck -y /dev/rdsk/c0t0d0s6 fsck -o f, p /dev/rdsk/c0t0d0s6 都是修复一般错误时使用的,有何不一样呢 ?

by dingdingA8 - Solaris - 2008-07-31 13:05:34 阅读(1639) 回复(5)

相关讨论

大家请指叫: sun blade2000机器,其中/dev/dsk/c1t0d0s2盘数拒无法看到. 操做如下: 1:mount -ro /dev/dsk/c1t0d0s2 /data 显示如下 mount : /dev/dsk/c1t0d0s2 on /data - WARNING unknow options "/dev/dsk/c1t0d0s2 " 2: # df -k 显示如下 kbytes used avail capacity Mounte on /dev/dsk/c1t0d0s2 70565698 67152037 2708005 97% ...

by bird2002 - Solaris - 2005-06-28 15:15:44 阅读(1222) 回复(3)

OS是UNIXRARE 7.1.1, 阵列是RAIDPRO 3500 做 fsck -F vxfs -o full /dev/rdsk/c2b0t0d0s1 pass0 - checking structural files pass1 - checking inode sanity and blocks ........ 最后提示 vxfs fsck: fsck read failure bno=604 off=0 len=8912 file system check failure, aborting ... 可以修复吗

by wangdonsy - 其他UNIX - 2009-01-15 09:43:46 阅读(2007) 回复(0)

fsck命令 对文件系统进行检查,并对损害的文件系统进行修复。 fsck的语法如下: fsck (-F fstype) (-v) (-m) (-special…) fsck (-F fstype) (-v) (-y|Y|n|N) (-o fstype options) (special…) 其中: -F fstype : 说明被检查的文件系统的类型 -v : 返回完成的命令行,但不运行 -y|Y: 对所有问题均回答Yes -n|N: 对所有问题均回答No -m: 对文件系统进行检查,不修复文件系统, 如果文件系统经检查后是可安装的...

by 古月石 - Solaris文档中心 - 2006-12-11 23:26:01 阅读(708) 回复(0)

fsck -p Does not display messages about minor problems but fixes them automatically. This flag does not grant the wholesale license that the -y flag does and is useful for performing automatic checks when the system is started normally. You should use this flag as part of the system startup procedures, whenever the system is being run automatically. If the primary superblock is corrupt, the seco...

by jiazf82 - AIX文档中心 - 2006-10-26 10:44:17 阅读(1064) 回复(0)

对文件系统进行检查,并对损害的文件系统进行修复。 fsck的语法如下: fsck (-F fstype) (-v) (-m) (-special…) fsck (-F fstype) (-v) (-y|Y|n|N) (-o fstype options) (special…) 其中: -F fstype : 说明被检查的文件系统的类型 -v : 返回完成的命令行,但不运行 -y|Y: 对所有问题均回答Yes -n|N: 对所有问题均回答No -m: 对文件系统进行检查,不修复文件系统, 如果文件系统经检查后是可安装的,则显示...

by dupeng144 - Solaris文档中心 - 2006-09-07 10:34:26 阅读(669) 回复(0)

fsck命令 http://www.fanqiang.com   对文件系统进行检查,并对损害的文件系统进行修复。 fsck的语法如下: fsck (-F fstype) (-v) (-m) (-special…) fsck (-F fstype) (-v) (-y|Y|n|N) (-o fstype options) (special…) 其中: -F fstype : 说明被检查的文件系统的类型 -v : 返回完成的命令行,但不运行 -y|Y: 对所有问题均回答Yes -n|N: 对所有问题均回答No -m: 对文件系统进行检查,不修复文件系统, 如果文...

by sun_cu - Solaris文档中心 - 2006-08-25 13:26:28 阅读(681) 回复(0)

fsck -F vxfs -y /dev/dsk/c0b0t3d0s1报如下错误: invalid vxfs super-block checksunm invalid super-block can't initialize aggregate aborting~~ 是硬盘有问题马?

by tttsjg_cn - Linux论坛 - 2005-03-28 09:52:20 阅读(511) 回复(0)

系统使用时,能用fsck 检测硬盘吗? 如何检测整个硬盘?

by gannon - Linux论坛 - 2004-12-09 22:17:51 阅读(428) 回复(1)

但我做fsck 时候,出现以下问题,如何解决 ** /dev/rdsk/c0d0s7 CANNOT READ: BLK 9582144 CONTINUE? y THE FOLLOWING SECTORS COULD NOT BE READ: 9582144 9582145 9582146 9582147

by bmctize - Solaris - 2003-12-30 12:49:04 阅读(732) 回复(1)

系统:vmware+solaris9 系统提示需要用fsck进行修复 我用root账户fsck时,系统提示Can't open /dev/rdsk/c0d0s0 Can't open /dev/rdsk/c0d0s7 请高手指点

by aroline - Solaris - 2003-06-06 10:50:46 阅读(992) 回复(4)