ChinaUnix.net
相关文章推荐:

linux挂载2tb硬盘

以前没有在linux下用过容量大于2tb的盘。结果在顾客面丢人大了,汗哪! 以下是我的详细步聚: [root@localhost ~]# fdisk -l Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 637 5116671 83 linux /dev/sda2 ...

by l_penny - Linux文档专区 - 2009-01-07 13:53:44 阅读(616) 回复(0)

相关讨论

以前没有在linux下用过容量大于2tb的盘。结果在顾客面丢人大了,汗哪! 以下是我的详细步聚: [root@localhost ~]# fdisk -l Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 637 5116671 83 linux /dev/sda2 ...

by joline - 存储文档中心 - 2008-04-22 16:12:39 阅读(889) 回复(0)

系统直接进入到 windows 7 了,没有出现 grub 的引导界面,什么原因? 系统安装顺序是先安装的 win7 然后安装的 CentOS 6 64-bit 问题描叙: http://bbs.chinaunix.net/thread-3572505-1-1.html

by snow888 - Linux系统管理 - 2011-10-24 15:39:05 阅读(14176) 回复(48)

系统安装正常完成,就是系统重新启动以后,直接进了 win7,没有出现 grub 的引导过程。 硬盘分区信息如下: 500 MB 的是 boot 区,662.53GB的部分是在 lvm2 管理下的其他的 linux 分区。 系统安装过程中没有发现任何问题,重新启动后没有出现 grub 的引导界面,直接进入了 win7 了。

by snow888 - Linux新手园地 - 2011-10-25 14:35:49 阅读(18716) 回复(50)

我知道linux上要使用大于2tb硬盘,不要把分区类型改成gpt的,但是在我的系统上用 parted命令 mklabel时,parted就自动退出了,请问有人遇到过类似的情况吗? 命令: /sbin/parted /dev/sdd parted /dev/sdd Warning: Device /dev/sdd has a logical sector size of 4096. Not all parts of GNU Parted support this at the moment, and the working code is HIGHLY EXPERIMENTAL. GNU Parted 1.8.1 Using /dev/sdd Welcome to...

by fmylife - Linux系统管理 - 2013-02-22 17:15:28 阅读(2804) 回复(6)

linux desktop user generally uses small hard disk and partition, but on server you need a large partition. For example, you cannot create 4tb partition size (RAID based) using fdisk command. It will not allow you to create a partition that is greater than 2tb. In this tutorial, you will learn more about creating linux filesystems greater than 2 Terabytes to support enterprise grade operation unde...

by tessykandy - Linux文档专区 - 2009-06-08 10:36:16 阅读(799) 回复(0)

对一个2tb的阵列使用redhat as 3在系统安装时进行划分,划分了3个区,分别是/data1、/data2、/data3,每个区600GB多的容量,但是在格式化系统时报错,而分成2个区/data1、/data2,每个区900GB多的时候却没问题,谁知道是怎么回事?

by jianxin0431 - Linux系统管理 - 2004-11-06 16:13:45 阅读(868) 回复(3)

linux desktop user generally uses small hard disk and partition, but on server you need a large partition. For example, you cannot create 4tb partition size (RAID based) using fdisk command. It will not allow you to create a partition that is greater than 2tb. To solve this problem use GNU parted command with GPT. It supports Intel EFI/GPT partition tables. Partition Table (GPT) is a standard for...

by jsjzhang - Linux文档专区 - 2008-09-04 16:50:54 阅读(966) 回复(0)

对一个2tb的阵列使用redhat as 3在系统安装时进行划分,划分了3个区,分别是/data1、/data2、/data3,每个区600GB多的容量,但是在格式化系统时报错,而分成2个区/data1、/data2,每个区900GB多的时候却没问题,谁知道是怎么回事?

by jianxin0431 - Linux论坛 - 2004-11-06 16:13:45 阅读(896) 回复(3)

公司新买了两个ATA盘柜,单个做成RAID5可以达到3.4T,想把两个串起来,做个6T以上的linux分区,不知是否有方法。 有兴趣的朋友,可以看一下我的另一个帖子: http://bbs.chinaunix.net/forum/4/20041011/422537.html

by eagerlinuxer - 系统管理 - 2004-10-11 21:14:23 阅读(534) 回复(0)

公司新买了两个ATA盘柜,单个做成RAID5可以达到3.4T,想把两个串起来,做个6T以上的linux分区,不知是否有方法。 有兴趣的朋友,可以看一下我的另一个帖子: http://bbs.chinaunix.net/forum/4/20041011/422537.html

by eagerlinuxer - Linux系统管理 - 2004-10-11 21:14:23 阅读(710) 回复(0)