ChinaUnix.net
相关文章推荐:

linux mint liveusb 无法启动

系统是64位的,

by touch21st - Linux系统管理 - 2012-08-03 08:50:03 阅读(1416) 回复(3)

相关讨论

重启计算机后出现如下提示: GNU GEUB version 0.97 (637k lower /2088644k upper memory) [Minimal BASH-like line editing is supported. For the first word,TAB lists possible command cpmpletions. Anywhere else TAB lists the possible completions of a device/filename. ] grub> 求助!

by cliffordl - Linux系统管理 - 2013-05-08 16:09:26 阅读(4484) 回复(4)

本帖最后由 e3399 于 2011-04-09 19:54 编辑 没有反应,直接进入我原来的系统。 用室友的电脑试了下,选择USB作为第一启动项,出现Boot error. 由于得过去学校的机房用电脑,那边没有linux系统,机房的电脑都设有还原的,装的软件重启后就没有了。装个虚拟机也不爽,机房电脑配置低,用起来很不爽。所以想做个移动linux系统,可以带到机房去用。 用U盘不行的话,用移动硬盘怎么样? liveusb在这里下载的。 https://fedorah...

by e3399 - Linux系统管理 - 2011-04-10 11:38:53 阅读(3028) 回复(3)

用ultroISO将ISO做到u盘上,机器可以启动.但是在选择了语言,键盘后,usb还是尝试去从cdrom去寻找模块安装. 请问如何制作一个完全的liveusb,要如何修改,谢谢.能否给一个比较详细的说明.

by abc_tang - Linux新手园地 - 2009-06-13 21:57:00 阅读(1099) 回复(3)

装了mint12,不知道启动脚本的如何,没有/etc/inittab和/etc/event.d啊,请问我怎么看run level不同的服务??在线等!

by whgreate - Linux系统管理 - 2012-03-12 10:05:03 阅读(1034) 回复(0)

比如将ubuntu系统制作成U盘启动,并且u盘被分成四个区,启动后怎样获得某个分区的设备号?

by Leanx - 嵌入式开发 - 2010-07-02 16:06:05 阅读(1406) 回复(0)

系统启动时出现以下信息,并且键盘的灯不停的闪 createing root device mounting root filesystem EXT3-fs:journal inode is deleted mount:error 22 mounting ext3 mount:error 2 mounting none switchroot: mount failed: 22 umount: /initrd/dev failed: 2 Kernel panic - not syncing: Attempted to kill init! 大家帮帮忙 怎么解决啊?

by fengyi518 - 内核源码 - 2008-11-02 14:46:51 阅读(1834) 回复(4)

IBM x3650 报错    01298006 the bios does not support the current stepping of processor LSI logic corp MPI boot ROW no supported devices found minimal BASH like line editing is supported for the first word. TAB lists possible command completinos.Anywhere else TAB lists the possible completions of a device. 请问是啥问题 谢谢

by is125@sina.com - Linux系统管理 - 2008-09-12 09:17:29 阅读(1986) 回复(5)

linux操作系统无法启动,我进行以下操作,进入grub grub>root (hd0,0) grub>kernel /boot/vmlinuz-2.6.11-1.1369_FC4 ro root=LABEL=/ linux single grub>initrd /boot/initrd-2.6.11-1.1369_FC4.img grub>boot 和 grub>root (hd0,0) grub>kernel /boot/vmlinuz-2.6.11-1.1369_FC4 ro root=/dev/hda1 grub>initrd /boot/initrd-2.6.11-1.1369_FC4.img grub>boot 均不能进入系统,不知道应该怎样去启动系统? [ 本帖最后由 renwox...

by renwox88 - Linux系统管理 - 2008-08-04 21:41:48 阅读(1328) 回复(5)

服务器:hp5500,操作系统:rh-as4-u2, 今天上午我远程登陆超级用户,突然提示我说密码不正确,其他普通用户可以正常登陆,后来去服务器本地登陆同样密码不对,然后重器服务器,加载内核之后报错: /bin/unicode_start:line 40:767segmentfault setfont $1 之后几项启动都ok,启动网卡eth0的时候又提示: /etc/rc.d/rc.sysinit:line 923 1816 segmenttation fault mkdir -m 1777 -9 /tmp/.IEC-unix >dev/null 2>$1 /etc/rc.d/...

by lizisor - Linux系统管理 - 2007-09-20 17:07:54 阅读(2275) 回复(4)

提示 硬盘加载失败 要马上备份数据! 怎么办?

by hondasky - Linux系统管理 - 2007-01-21 10:31:54 阅读(1067) 回复(2)