ChinaUnix.net
相关文章推荐:

linux mount umount

mount umount linux 命令参考 辅助信息 磁针石 联系方式: gmail and gtalk: xurongzhong#gmail.com mount 安装文件系统 redhat 9 语法: mount [-lhV] mount -a [-fFnrsvw] [-t vfstype] [-O optlist] mount [-fnrsvw] [-o options [,...]] device | dir mount [-fnrsvw] [-t vfstype] [-o options] device dir 描述: 标准格式: mount -t type device dir 使用该命令一...

by oychw - Linux文档专区 - 2008-07-23 10:51:18 阅读(942) 回复(0)

相关讨论

fsck fsck: /sbin/fsck this is the real path it only the uperuser have the permission to running the command,check filesystems for errors and optionally correct them. -A run checks on all filesystems specified in /etc/fstab. this option is intended for use at boot time.before filesystem mounted -N don't executed.but showed what would be done -t type specify the type of f...

by jimonitu - Linux文档专区 - 2007-08-23 16:56:19 阅读(685) 回复(0)

[color="#295200"]linux系统调用--- mount/umount函数详解 【 mount/umount系统调用】 功能描述: mount挂上文件系统,umount执行相反的操作。 用法: #include int mount(const char *source, const char *target, const char *filesystemtype, unsigned long mountflags, const void *data); int umount(const char *target); int umount2(const char *target, int flags); 参数: source:将要挂上的文件系统,通常是一个设...

by sky_flying - Linux文档专区 - 2008-12-05 16:12:57 阅读(971) 回复(0)

linux系统调用-- mount/umount函数详解 【 mount/umount系统调用】 功能描述: mount挂上文件系统,umount执行相反的操作。 用法: #include int mount(const char *source, const char *target, const char *filesystemtype, unsigned long mountflags, const void *data); int umount(const char *target); int umount2(const char *target, int flags); 参数: source:将要挂上的文件系统,通常是一个设备名。 target:文件...

by Joken - Linux文档专区 - 2008-11-12 11:29:15 阅读(771) 回复(0)

1. 用mount/umount能做什么? 不同的操作系统使用不同的文件系统格式。MS-DOS支持FAT16文件系统,Windows98支持FAT16、FAT32文件系统,WindowsNT支持FAT16、NTFS文件系统,Windows2000则支持FAT16、FAT32、NTFS三种文件系统格式,而linux差不多支持所有的文件系统格式,但一般使用ext2或ext3文件系统。 很多用户使用的是windows操作系统,如果想在运行的linux下访问其它文件系统中的资源的话,就要用mount命令来实现。 2. mount的...

by gunguymadman - Linux系统管理 - 2009-02-19 10:30:22 阅读(961) 回复(2)

挂载文件系统的命令是 mount,其语法是: mount [选项] <-t 类型> [-o 挂载选项] <设备> <挂载点> 在本例中,我们首先会将分区临时挂载在 /mnt (或您选择的任何其它挂载点:请记住,挂载点必须已经存在)。挂载我们新创建的分区的命令是: $ mount -t ext3 /dev/hdb1 /mnt -t 选项用于指定分区上文件系统的类型。您最常遇到的文件系统应该是 ext2FS(GNU/linux 文件系统)或 ext3FS(改进了日志性能的 ext2FS),VFAT(适用于所...

by rhvector - Linux新手园地 - 2008-09-10 17:10:21 阅读(5654) 回复(10)

1. 用mount/umount能做什么? 不同的操作系统使用不同的文件系统格式。MS-DOS支持FAT16文件系统,Windows98支持FAT16、FAT32文件系统, WindowsNT支持FAT16、NTFS文件系统,Windows2000则支持FAT16、FAT32、NTFS三种文件系统格式,而linux差不多支持所有的文件系统格式,但一般使用ext2或ext3文件系统。很多用户使用的是windows操作系统,如果想在运行的linux下访问其它文件系统中的资源的话,就要用mount命令来实现。   2. ...

by 剑心通明 - BSD文档中心 - 2008-03-19 18:10:36 阅读(862) 回复(0)

mount和unmount 一个文件系统可以使用之前,必须mount。操作系统然后做一些记录以确认正常。因为UNIX所有的文件在一个目录树中, mount操作的结果使新的文件系统的内容好象在某个已经mount的文件系统的一个已经存在的子目录中。 例如,图 4.3 显示3个单独的文件系统,每个有其自己的根目录。当后2个文件系统被mount到第一个文件系统的/home 和 /usr , 我们得到一个目录树,如图 4.4 . 图4.3: 3个单独的文件系统。 ...

by yongwenli2008 - Linux文档专区 - 2008-10-28 10:27:26 阅读(560) 回复(0)

1. 用mount/umount能做什么? 不同的操作系统使用不同的文件系统格式。MS-DOS支持FAT16文件系统,Windows98支持FAT16、 FAT32文件系统,WindowsNT支持FAT16、NTFS文件系统,Windows2000则支持FAT16、FAT32、NTFS三种文件系统 格式,而linux差不多支持所有的文件系统格式,但一般使用ext2或ext3文件系统。 很多用户使用的是windows操作系统,如果想在运行的linux下访问其它文件系统中的资源的话,就要用mount命令来实现。   2. mo...

by sealearner - Linux文档专区 - 2008-08-01 15:10:08 阅读(712) 回复(0)

我想有这样一个shell, 可以很好的完成mount/umount命令, 比如,我知道DVD的设备是/dev/dvd, 可是实际上,比如用mount命令mount/dev/dvd这个设备, 然后用mount查看, 设备是/dev/hdb, 这样的问题 所以,我想写个一个shell,能很好的完成mount/umount命令,比如强制umount一个设备(最好不用eject命令) 这样有人写过吗? [ 本帖最后由 lidexiang 于 2007-4-22 20:05 编辑 ]

by lidexiang - Shell - 2007-04-23 10:13:34 阅读(1461) 回复(2)

一、mount和umount命令语法 mount: 语法: mount [参数选项] 设备名 安装目录 说明:将某个文件系统挂载到某个目录上。当这个命令执行成功后,直到我们使用umnount将这个文件系统移除为止。 umount: 语法:umount [设备名|安装目录] 说明:用于卸载已安装的某个文件系统。 二、mount参数选项 -t文件系统类型> 指定设备的文件系统类型,常见的有: minix linux 最早使用的文件系统 ext2 linux 目前常用的文件系统 msdos...

by 52it - Linux文档专区 - 2007-01-05 20:33:05 阅读(828) 回复(0)