
---------- Dump Progress Indicator ---------- 0c0 The dump completed successfully 0c1 The dump failed due to an I/O error. 0c2 A user-requested dump has started. You requested a dump using the SYSDUMPSTART command, a dump key sequence, or the Reset button. 0c3 The dump is inhibit 0c4 The dump did not complete. A partial dump was written to the dump device. There is not enough space on ...
by tomcent_2006 - AIX文档中心 - 2008-06-19 22:45:52 阅读(2152) 回复(2)
文件: led解释.rar 大小: 137KB 下载: 下载 本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u/9606/showart_169126.html
RS/6000液晶显示屏上显示代码(led)的含义 本文介绍RS/6000启动过程中机器上的液晶显示屏代码的含义。本文代码不针对具体机型。 ---------- Dump Progress Indicator ---------- 0c0 The dump completed successfully 0c1 The dump failed due to an I/O error. 0c2 A user-requested dump has started. You requested a dump using the SYSDUMPSTART command, a dump key sequence, or the Reset button. 0c3 The dump i...
led技术的应用 来源于:www.56iq.net 近年来led技术产品在舞台工程、娱乐场所的应用呈迅速增加的趋势。不仅是传统的效果灯光、灯光效果墙产品深受用户青睐,随着全彩视频led显示屏产品的日趋成熟,led屏幕也大量应用在舞台的背景显示和现场直播显示灯方面,成为了大型会演场所必备的布景和灯光效果技术。亮度和点距性能的提升,使得led屏幕在室外大型场所和室内近距离观看场所的应用获得了重大突破。部分led显示屏可以弯曲,这种柔...
本文档列出了从 led 553 的恢复步骤 . 在 RISC 6000 系统启动的 IPL 过程中, 假如系统不能读取或运行 /etc/inittab 文件, 将会停在 led 553.要从 led 553 恢复, 需要检查 /dev/hd3 和 /dev/hd4 本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u3/92066/showart_1810916.html
led电子屏 led电子屏 是八十年代后期在全球迅速发展起来的新型信息显示媒体,它利用发光二极管构成的点阵模块或像素单元组成在面led电子屏幕,以可靠性高、使用寿命长、环境适应能力强、价格性能比高、使用成本低等特点,在短短的十来年中,迅速成 长为平板显示的主流产品,在信息显示领域得到了广泛的应用。 led电子屏 的应用涉及社会经济的许多领域,主要包括: (1)证券交易、金融信息显示。这一领域的led电子屏占到了...
1. Access the rootvg with all file systems mounted by following the procedure described in Section 4.4.2, “Accessing a system that will not boot” on page 110. 2. Check for free space in /, /var and /tmp by using the df command. 3. Check the /etc/inittab file and correct the inittab problems if there is one empty inittab file, missing inittab file, or wrong entry in inittab file. 4. Check probl...
IBM 部件编号 #0503 ------> E41004-PORT, 8-INIT / 09L2061 SSA ADAPT / 89H5651 16 MB DRAM #0505 04N6759 4WAY 450MHZ 4MB L2 #0508 04N6772 6WAY 500MHZ 4MB L2 #0509 04N6931 500MHZ CPU 4WAY FACT ONLY #0701 59H3161 7 GB TAPEDRIVE DUAL ENDED / GRND STRIP=87G1880 #0702 59H2823 DUAL 4GB DRIVES #0703 59H2842 7331:305 tape library single 20GB drive #0704 59H2842 7331:305 tape library dual 20G...
我的p615机器重启机器后led显示的517代码,我用光盘以维护模式启动,启动后对几个文件系统做了修复,修复正常通过。 然后我做bosboot -a -d /dev/hdis0,系统报找不到此命令 然后我mount /usr,也正常通过了 再执行命令的时候就报killed,不知这是什么原因。 请各位兄弟给予帮助。