编译内核的错误
我在EM64T机子上装了一个RHEL3U7 EM64T的linux系统，装完后想重新编译一下内核，在生成模块的时候出现了如下错误， 我用make modules命令编译生成模块，错误如下，望各位指教，由于是第一次编译内核，不知道如何去分析这个问题： [code]gcc -D__KERNEL__ -I/usr/src/linux-2.4.21-40.EL/include -Wall -Wstrict-prototypes -common -Wno-unused -fomit-frame-pointer -mno-red-zone -mcmodel=kernel -pipe -f rength-reduce -fn...
by whpu000625 - 内核/嵌入技术 - 2006-06-20 09:36:26 阅读（650） 回复（0）
我编译针对at91sam9260的内核，内核采用timesys linux，内核编译到最后出错。以下是出错信息： LD vmlinuz YSMAP System.map SYSMAP .tmp_System.map MODPOST vmlinux OBJCOPY arch/arm/boot/Image Kernel: arch/arm/boot/Image is ready AS arch/arm/boot/compressed/head.o GZIP arch/arm/boot/compressed/piggy.gz AS arch/arm/boot/compressed/piggy.o CC arch/arm/boot/compressed/...
您们好: 在我编译完linux-2.6.14内核后,当我用rpm命令安装rpm包时,出现以下粗错误: rpmdb: unable to join the environment error: db4 error(11) from dbenv->open: 资源暂时不可用 error: cannot open Packages index using db3 - 资源暂时不可用 (11) error: cannot open Packages database in /var/lib/rpm 我也把module-init-tools安上了,就是不管用. 请大家帮忙!
./generate-modprobe.conf /etc/modprobe.conf Warning: not translating path[updates]=/lib/modules/updates Warning: not translating path[unsupported]=/lib/modules/unsupported 编译内核前出现的错误,?????
编译内核时产生了如下错误，请指点迷津： [root@a linux-2.4]# make bzImage make -r -f tmp_include_depends all make[1]: Entering directory `/usr/src/linux-2.4.20-8' make[1]: Circular /usr/src/linux-2.4.20-8/include/asm/smplock.h <- /usr/src/linu x-2.4.20-8/include/linux/interrupt.h dependency dropped. make[1]: Circular /usr/src/linux-2.4.20-8/include/linux/netfilter_ipv4/ip_conntr ack.h <- /usr/src/li...
该启动桌面出现： I can't start the x erver(your graphical interface).It is likely that it is not set up correctly,would you like me to try to run the X configuration program?note that you will need the root passwd for this. 什么都不能输入。 请教高手，是什么原因，我哪个模块没编译。
[root@Linus-Server linux]# make menuconfig HOSTCC scripts/basic/split-include In file included from /usr/include/linux/errno.h:4, from /usr/include/bits/errno.h:25, from /usr/include/errno.h:36, from scripts/basic/split-include.c:26: /usr/include/asm/errno.h:4:31: asm-generic/errno.h: ûÓÐÄǸö&Icir...
make[1]: *** No rule to make target `arch/i386/kernel/entry.o', needed by `arch/ i386/kernel/built-in.o'. Stop. make: *** [arch/i386/kernel] Error 2 这是什么问题啊？ fedora1 2.4.22升级到2.6.8
再编译完内核后，启动计算机出现No init fuond,Try passing init= option to kernel 错误？这是为什么？
执行到make modules的时候报下面的错误，请教是什么原因导致？ scsi_dump.c: In function `scsi_dump_sanity_check': scsi_dump.c:377: parse error before `int' scsi_dump.c:397: `adapter_sanity' undeclared (first use in this function) scsi_dump.c:397: (Each undeclared identifier is reported only once scsi_dump.c:397: for each function it appears in.) scsi_dump.c:409: `sanity' undeclared (first use in thi...
